The DR furnace is a steel vessel with an internal refractory lining in the reducing zone.
直接还原炉是一种钢制容器，在其还原带内具有耐火材料做的炉衬。
All kinds of the flue lining and industrial furnace heat preservation application.
各种烟道内衬和工业窑炉的保温应用。
The article introduces the composition lining of the mains frequency coreless induction furnace with short coils.
本文介绍短线圈工频无心感应保温炉采用的复合炉衬。
Therefore, the use of furnace lining has definite time limit.
所以炉衬的使用是有一定的期限的。
The temperature inside the furnace wall as well as its variation and the strong disturbance are the important roles influenced on the furnace lining erosion.
影响艾萨炉炉衬蚀损的要素是内炉壁温度及其波动和在内炉壁处的强烈搅动。
The furnace lining of diathermanous inductor adopts entirely knot type.
本透热感应器的炉衬采用的是整体打结式。
If used properly, heating materials crashing and extruding furnace lining will occur.
如使用不当，还会出现加热材料碰撞和挤压炉衬现象。
Prohibit taking furnace lining as the guide for heating workpiece.
禁止以炉衬作为加热工件的导轨。
No matter it is knot type furnace lining or fabricated furnace lining, when for long time working under the high temperature it is certain to change (mainly is expansion and contraction or oxidation).
不管是打结式炉衬，还是装配式炉衬，长期在高温下工作都会发生变化（主要是热胀冷缩和氧化）。
High temperature performance of acid lining of the induction crucible furnace mainly depends on the physical and chemical properties and mineral composition of used refractory.
坩埚式感应炉酸性炉衬的高温性能，主要取决于所用耐火材料的物理、化学性能及矿物组成。
A brief introduction of the sealing design, structure design, main material selection, manufacture and inspection for high pressure crystal growing furnace with lining structure is made.
对高压带衬里结构单晶炉的密封与结构设计、主要材料选择以及制造、检验作了简要介绍。
Ceramic Industry: Structure and light trucks kiln furnace hot face lining of the body.
陶瓷行业：轻质窑车结构与窑炉的热面衬体。
The life campaign of the furnace top lining will be lasted by using mullite cast refractory with high strength and alumina and carrying out construction carefully and drying correctly.
阐述了加热炉炉顶耐火材料烧损机理，通过选择高强高铝莫来石浇注料作为炉衬，精心组织施工，科学烘炉达到了延长炉顶使用寿命的目的。
Castable refractories reinforced with steel fibers can make the toughness of furnace lining and its thermal shock-resistant property raised and improved obviously, and its service life prolonged.
用钢纤维增强浇注料，可使工业炉窑内衬的韧性得到显著的提高，抗热震和抗冲击性得到明显改善，从而延长了它们的寿命。
There are three respects of contrast between high alumina and silica sand in using for induction furnace Lining. They are the sintering technology, the using effect and the synthetic economic results.
本文从烧结工艺、使用效果及综合经济效益三方面就高铝矾土与石英砂在感应电炉炉衬上的应用做了对比。
In order to ensure the working life of the furnace lining, the new inductor put on production must roast with low power, 2 hours later can it be produced with high power.
为了保证炉衬使用寿命，新投入生产的感应器，一定要低功率烘烤，2小时后再大功率开始生产。
A new method was found for heating up furnace lining by painting refractory fiber on constant pressure furnace lining.
通过耐火纤维喷涂在常压炉衬里上的成功应用，为加热炉衬里改造开拓了一条新路。
The main Points of technological arrangement of the large and medium duty Inverter Frequency Furnace have been elaborated. the furnace lining materials and their application have been introduced.
阐述了大中容量变频炉工艺布置要点，介绍了变频炉炉衬材料及应用。
To prolong furnace lining′s service life, refining furnace lining is rammed with magnesia ramming material instead of magnesia brick.
为延长炉衬的使用寿命，用镁质捣打料代替镁砖打结精炼电炉炉衬。
The results showed that the ceramic fiber modules show much superiorities as furnace lining.
结果表明，陶瓷纤维模块用于炉内衬显示了众多的优越性。
GQ98 Series pourable refractory has been successfully developed in order to improve the complex lining of steel rolling heating furnace and to renew the materials and structure of the existing lining.
为进一步提高轧钢加热炉复合炉衬的良好效益，更新现有炉衬的材料和结构，成功地开发了GQ 98系列浇注料。
When producing the rare earths Fe-Cr-Al alloy by electroslag remelting method, the optimum quantity of rare earths added to three phase lining electroslag furnace is 0.5%.
电渣双联法生产稀土铁铬铝合金时，稀土在三相有衬电渣炉中的最佳加入量为0.5%。
The furnace top inner lining construction is important character of hot air furnace type. Because it decides furnace lining lifetime.
炉顶内衬结构是热风炉类型的重要特征，决定着热风炉炉型和炉衬寿命的长短。
Magnesia ramming materials have been widely used in China instead of magnesia bricks as furnace lining materials of ferroalloy refining furnace.
用镁质干式打结耐火材料代替成型镁砖作为铁合金精炼电炉的炉衬材料在中国已得到普遍应用。
Based on Baosteel new No. 4 blast furnace lining structure, a three-dimensional temperature field mathematical model is established.
以宝钢新建4号高炉炉衬结构为原型，建立了这种炉衬结构三维温度场数学模型。
Research on mechanism of serious corrosion of furnace lining is conducted; Baiyin furnace life is prolonged through optimized arrangement of refractory material.
对白银炉炉衬蚀损较严重部位的蚀损机理进行了研究，通过采用耐火材料优化配置技术，提高了白银炉寿命。
The furnace lining is made from light high alumna, light chamotte, insulating plates.
炉子内衬由轻质高铝砖，轻质粘土砖，绝热板组成。
CAD is employed in the designing of pit heat-treatment furnace, containing a established data bank of furnace body, optimum seeking of furnace lining materials and automatic drawing-making.
采用微机辅助设计热处理井式加热炉，建立一套护体设计的数据库，优选了炉衬材料，自动绘制炉体结构图。
Heat losses can be reduced by lining the furnace with fire - bricks.
炉热的损失可以用耐火砖搪炉壁的办法来减少。
Heat losses can be reduced by lining the furnace with fire - bricks.
炉热的损失可以用耐火砖搪炉壁的办法来减少。
应用推荐