Furnace body is portable and good stability.
炉体轻便易携，且稳固性好。
The furnace body craft delicacy, smooth and easy to clean…
炉体工艺精致，光滑易清洁。
Easy maintenance: up furnace body can be raised for easy maintenance.
易维护：上炉体可向上提升，便于维护。
Retrofitting of furnace body, burners and piping in the furnace is presented.
主要论述了辊底式无缝钢管退火炉在炉体、燃烧、管道等方面的技术改造。
The developed salt bath has less corrosion to the furnace body and the electrodes.
所研制的盐浴对炉衬和电极侵蚀轻微。
The outer wall of the furnace body is provided with a water inlet and a water outlet.
炉体外壁设置有一个进水口和一个出水口。
Furnace body is vertical lift type, installation of a self-lifting configuration for furnace overhaul.
加热炉体为垂直升降式，装置一套自升降配置，以便进行炉内的检修工作。
Furnace body using circular belt, orthogonal plane home, allowing the system to run a smooth and reliable.
加热炉体采用圆形皮带传动，正交面置，使系统运行平稳而可靠。
In boiler outage for a long time, should be very wary of the furnace body external corrosion remaining problems.
在锅炉长期停用时，应非常留意炉体外部的防腐颐养问题。
This new method appropriates not only for numerical calculation of BFH, but also for that of Blast Furnace Body.
此方法不仅适用炉缸炉底的数值计算，也适用高炉炉体的数值计算。
The furnace body is provided with a right furnace box and a left furnace box which are in a mutual butt joint way;
炉体设有左右 两个相互对接的炉箱，炉体的上盖设有激光作业窗口；
The furnace body is welded by profile steel and plates and the studio in the furnace shell is made of hi-temp mullite.
炉体是采用型钢、板材焊接而成的炉壳，炉壳内的工作室采用高温莫来石砌筑成型。
A stack nozzle is arranged above or behind the furnace body, and an air inlet chamber is arranged below the furnace body.
在炉体的上 方或后方设置出烟口，在炉体的下方设置进风室。
Smelting at the middle and lower parts of the furnace body produces no smoke gas, thus greatly reducing environmental pollution.
在炉体中下部冶炼，无烟气 排出，大大改善环境污染。
The furnace body of the outside furnace of a rotary furnace is sealed, the air is vacuumized and protection atmosphere is input.
旋转炉外炉体密封、抽真空和通入保护性气氛。
A close relation between BF campaign and the control of furnace body cooling equipment is described in light of No. 1 BF production.
根据宝钢1号高炉的生产实践，论述了高炉长寿与炉体冷却系统的管理有着密切的关系。
When the equipment is normally running, opening the power cabinet door and insulated guard board of furnace body is strictly prohibited.
设备正常运行时，严禁打开电源柜门和炉体的绝缘护板；
In addition, surrounding temperature and exhaust of the furnace body are greatly reduced, thus improving working conditions of operators.
此外，炉体周围温度和排放大幅下降，改善了操作者的工作条件。
The furnace has the advantages of fast temperature rising, accurate temperature control and short furnace body as well as easy to operate.
该炉具有升温快，控温准确，炉子短，操作方便等优点。
The two ends of the furnace body are respectively provided with a thermocouple that is connected with the controller by a compensation lead.
炉体两端分别设置有热电偶，热电偶通过补偿导线与控制器连接。
This paper described the characteristics, main technique parameters, the construction of furnace body, heating and contrlo system of close-type drying furnace.
主要介绍了封闭式干燥炉的特点、主要技术参数、炉体构成、加热和控制系统等。
Furnace body of compact construction may provide hot air in various temperature ranges to meet the needs of drying. industrial furnace, fluidized bed, combust...
该炉体结构紧凑，可提供不同温度范围的热空气以满足干燥、烘干的需要。
Therefore, friction between the push rod and the furnace body front wall is less and the push rod is very flexible when running through the furnace body front wall.
这样推杆与炉体前壁间的摩擦力更小，推杆在通过炉体前壁时非常灵活。
Using ANSYS software, the spatial distribution of magnetic flux density around the furnace body was simulated. The simulation data were compared with measured ones.
利用ANSYS软件包，通过求解磁矢量微分方程，确定了磁感应强度在空间的分布，计算结果与实际测量数据进行了对比。
Diathermy equipment is ordinarily made up of lF power supply, thermoelectric capacitors, inductive furnace body, starting or electric material-moving device and etc.
透热设备一般有中频电源、电热电容、感应炉体、气动或电动推料等部分组成。
May circle the system in the vacuum tubular resistance furnace body installment by the multi-layered copper pipe the horizontal field winding, must let water through cooling.
可在真空管式电阻炉体安装由多层铜管绕制的横磁线圈，需通水冷却。
Furnace body of compact construction may provide hot air in various temperature ranges to meet the needs of drying. industrial furnace, fluidized bed, combustion and heat tr...
该炉体结构紧凑，可提供不同温度范围的热空气以满足干燥、烘干的需要。
The energy saving approaches of furnace body energy-saving, the billet thermal regulation, the hot-charging and hot-transportation and the residual-heat utilization were introduced.
介绍了加热炉炉体节能、钢坯加热制度、热装热送和余热利用等方面的节能途径。
The invention relates to a slab laser cladding compound alloy layer heater which comprises a furnace body, a rolling screen orbit and a thermal insulation rolling screen cover plate.
平板激光熔覆复合合金层面加热器，包括炉体、卷帘轨道、保温卷帘盖板；
The invention relates to a slab laser cladding compound alloy layer heater which comprises a furnace body, a rolling screen orbit and a thermal insulation rolling screen cover plate.
平板激光熔覆复合合金层面加热器，包括炉体、卷帘轨道、保温卷帘盖板；
应用推荐