The furnace chamber has flue next to activation path which were built up with special firebrick.
炉芯包括内烟道和活化道，用特异型耐火砖堆砌组装而成。
At present, the method for calculating the tube wall temperature in a furnace chamber is not exact.
针对目前大型煤粉锅炉屏式过热器管壁温度计算不准确的问题，提出了屏式过热器三维管壁温度计算方法。
There are widespread application in such parts as the smoke deflecting corner of furnace chamber of power plant and the wall seal of furnace top.
广泛用于电厂锅炉炉膛折烟角、炉顶穿墙密封等部位。
The common microwave oven microwave's in furnace chamber radiation is fixed, to heat up food to be even, therefore has the turntable to rotate food.
一般的微波炉微波在炉腔内的辐射是固定的，为了加热食物均匀，所以有转盘转动食物。
But the so-called extension wave stove is lets the microwave radiation in the furnace chamber internal rotation, is more advantageous in the heating is even.
而所谓转波炉是让微波辐射在炉腔内旋转，更有利于加热均匀罢了。
Start up fan will air into the furnace chamber, make drum boiler stop when the gas chamber may remaining purging and fan blowing off five minutes before commencement of ignition.
启动风机将空气鼓入加热炉炉膛，使停炉时可能残存炉膛内的煤气吹净，风机吹扫5分钟后方可送气点火。
The oven is in order to obtain sintered layer, sintering layer directly affects the service life of the furnace, the furnace chamber was built, immediately before the baking oven;
烘炉是为了获得烧结层的过程，烧结层的好坏直接影响到了炉子的使用寿命，炉腔筑好后，应立即进行烘炉；
KSF KSY Series digital display temperature controller cannot only measure and control the furnace temperature, but also display the digital of the temperature of the furnace chamber.
KSG与KSY系列是数显式温度控制器，不仅能自动测量、控制电炉温度，尚能对炉膛温度进行显示。
The cell's life can be prolonged remarkably after startup secondly through repair the furnace chamber and local damages in side of the cell. It is beneficial to resources utilization effectively.
通过对电解槽炉膛、炉侧局部破损部位进行修复，二次启动后大大延长了电解槽寿命，有效地利用了资源。
A chamber, such as the furnace of a steam locomotive, in which fuel is burned.
火箱，燃烧室一种燃料在里面燃烧的内室，例如蒸汽机车的燃烧室。
Heating chamber is pivotal part of the polycrystalline silicon ingot production furnace.
前言：加热室是多晶硅铸锭炉的关键部件之一。
Heating chamber is pivotal part of the polycrystalline silicon ingot production furnace.
加热室是多晶硅铸锭炉的关键部件之一。
The thermal situation for the soaking chamber of CAPL. including heating characteristic. temperature distribution in the furnace and heat equilibrium.
本文介绍某厂CAPL均热室热工工况，包括均热室的供热特点、炉内温度分布及热平衡。
In the long-term operation of atmospheric and vacuum heat furnace that use vacuum heavy oil as fuel, thesurface of nailhead furnace tube in the convection chamber was seriously deposited.
以减压渣油为燃料的常减压加热炉在长期生产运行过程中，对流室钉头炉管表面结垢严重。
The thermal situation for the soaking chamber of CAPL. including heating characteristic. temperature distribution in the furnace and heat equilibrium. is introduced in this paper.
本文介绍某厂CAPL均热室热工工况，包括均热室的供热特点、炉内温度分布及热平衡。
The article discussed improving all kinds of methods to improve temperature uniformity of chamber furnace, pit furnace, salt bath furnace, fuel furnace.
本文主要介绍了提高热处理箱式电炉、井式电炉、浴炉和燃料炉炉温均匀性的各种技术方法。
The cooling chamber (15) of the continuous firing furnace (10) is installed with guiding passage (1) and exhaust passage (2).
在连续式烧成炉（10）的冷却室 （15）设有导入通道（1）和排气通道（2）。
Describes the advantages of the jointly-designed three-chamber vacuum brazing furnace and the construction of vacuum mup and solders used for it.
叙述了真空保温杯的种类，保温时间及使用寿命，联合设计三室真空钎焊炉的优点以及真空杯的钎焊焊料、结构。
Taking the automotive rear axle gear as an example, the design and adjusting of nitrogen-based atmosphere carburizing process were conducted on the new-built mult-purpose chamber furnace.
以汽车后桥齿轮为实例，在新制造的箱式多用炉上进行了氮基气氛渗碳淬火工艺的设计、调试和检测。
The effection and methods of controlling chamber pressure in heating furnace are narrated.
论述了加热炉炉膛压力控制的作用、控制方法。
The whole geometric structures of combustor, combustion chamber and furnace tube in delayed coking furnace were accurately calculated by the whole-coupling method.
采用分区耦合的计算方法，实现了对工业焦化炉从燃烧器、炉膛、炉管整体几何结构的仿真，并且对焦化炉内流动、燃烧和传热全部工艺过程进行了模拟。
A cooling medium inlet and a cooling medium outlet are arranged on the furnace wall of the heat exchange chamber.
在热交换室的炉壁上设有冷却介质进口和冷却介质出口；
A stack nozzle is arranged above or behind the furnace body, and an air inlet chamber is arranged below the furnace body.
在炉体的上 方或后方设置出烟口，在炉体的下方设置进风室。
A feed inlet, a temperature measuring port, a vacuum port and a discharge outlet are arranged on the furnace wall of the reaction chamber.
在反应室炉壁上设有加料口、测温口、真空口和出料口。
The new heat pipe type heating furnace with high efficiency based on heat pipe principle is consisted of the combustion chamber, evaporator and heat exchanger.
基于热管原理将燃烧室、蒸发器和换热器集于一体，构成了新型高效热管式加热炉。
The conditions to realize automatic control of chamber pressure in heating furnace are concluded.
给出了实现加热炉炉膛压力自动控制的条件。
Generally, the steel rolling furnace's service life is 3-10 years, the wrought steel chamber furnace is about 2 years, and the soaking pit side nozzle furnace's is 3-6 years.
轧钢加热炉的使用寿命一般为3 ~10年，锻钢室式加热炉的寿命约为2年，单侧上烧嘴均热炉的使用寿命一般为3 ~6年。
By altering the furnace pressure rapidly, baneful gases, such as oxygen and vapour, could be eliminated from the chamber. Therefore, cementite and nitriding processes are accelerated.
改变炉压可迅速排除炉膛内氧、水蒸气等有害气体，可加速渗碳、渗氮过程。
High strength in medium temperature, stable volume in high temperature, wear-proof, anti-slag corrosion, material returner, coal-saver furnace wall and mixing chamber inner wall etc.
中温强度高，高温体积稳定，耐磨损，抗熔渣侵蚀。返料器、省煤器炉墙、混合室内墙等部位。
High strength in medium temperature, stable volume in high temperature, wear-proof, anti-slag corrosion, material returner, coal-saver furnace wall and mixing chamber inner wall etc.
中温强度高，高温体积稳定，耐磨损，抗熔渣侵蚀。返料器、省煤器炉墙、混合室内墙等部位。
应用推荐