English Name: welding consumables - wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification.
简体中文标题：焊接消耗品。高强度钢气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属。分类。
Welding defects such as collapse of molten pool, burning through, would like to happen in the high efficient gas shielded metal arc welding.
应用高效的气体保护熔化极电弧焊焊接铝合金薄板时，容易出现熔池下塌、烧穿等焊接缺陷。
English Name:Welding and allied processes - Recommendations for joint preparation - Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels.
简体中文标题：焊接和相关工艺。接缝制备的建议。钢的手动金属电弧焊、气体保护金属电弧焊、气焊、TIG焊接和束焊。
Fracture toughness of both shielded metal arc welding and gas metal arc welding is almost the same.
焊条电弧焊焊缝的断裂韧性与气体保护焊焊缝的断裂韧性相当。
Twin-wire indirect arc gas shielded welding is a new welding technology.
双丝间接电弧气体保护焊是一种新的焊接方法。
CO2 gas shielded arc welding is widely used in production, but the spatter produced in the weld process badly affects the quality of weld.
CO2气体保护焊是广泛应用在生产中的焊接方法，但因为焊接时飞溅过大影响了焊接质量。
To reveal the influence of forced convection on gas shielded arc welding temperature field, the infrared camera was used to investigate the temperature field of the base metal in CO2 arc welding.
为了研究强制对流对气体保护焊温度场的影响，通过红外热像仪检测了CO2气体保护焊的温度场，发现在熔池及其邻近区域温度呈圆锥型分布。
Companies with welding, carbon dioxide gas shielded arc welding, argon, carbon arc gouging, oxygen cutting and other special operations personnel.
公司具备电焊、二氧化碳气体保护焊、氩弧焊、碳弧气刨、氧气切割等特种作业人员。
And the operation of various gas-shielded welding, ac and DC arc welding machine, stud welding machine, air plasma cutting machines and other ancillary products.
且经营各种气体保护焊机、交直流氩弧焊机、螺柱焊机、空气等离子切割机等配套产品。
The twin-wire indirect arc gas-shielded welding is a new welding technology.
双丝间接电弧气体保护焊是一种新的焊接工艺。
Because of the difference of arc circuit, the welding process of twin-wire indirect arc gas shielded welding is more stable than single wire welding.
由于电弧回路结构不同，双丝间接电弧气体保护焊的焊接过程比单丝焊更加稳定。
The droplet transfer in the twin-wire co-pool gas-shielded metal arc welding(TCGMAW) process greatly affects the welding seam appearance and the welding quality.
双丝共熔池气体保护焊（TCGMAW）的熔滴过渡对焊缝成形以及焊接质量具有重要的影响。
The paper introduces the technology of CO2 gas shielded arc welding.
介绍了CO2气体保护焊焊接操作技术。
Technological process of CO2 gas shielded metal arc welding with stainless flux cored wire used for stainless steel tank construction is presented in this paper.
介绍了采用不锈钢药芯焊丝CO2气体保护焊焊接不锈钢储罐的工艺过程。
Such as electric arc welding, carbon dioxide gas shielded arc welding, TIG etc.
电弧焊、二氧化碳气体保护焊、氩弧焊等各种焊接。
The national standard is suitable for welded joint of carbon steel and low alloy steel with gas welding (being used for sheet metal), manual arc welding and gas - shielded welding.
本标准适用于气焊(用于薄板)，手工电弧焊及气体保护焊焊接的碳钢、低合金钢焊接接头。
The hardness of welded joints obtained by double-wire submerged arc welding is significantly better than that obtained by CO2 gas shielded. The peak hardness appears in the heat affected zone.
CO2气体保护焊接头的硬度值明显较双丝埋弧焊接头的硬度值高，硬度值在热影响区出现峰值。
The type GH-1 Gas-Mixer is used suitably at the gas supply station for the gas shielded arc welding in general welding shops and can meet the needs of many torches at the same time.
该配比器适合于一般焊接车间气体保护焊的供气站使用，能供给焊接岗位上多把焊炬使用。
It can provide several high performance welding modes, such as constant-voltage submerged arc welding, constant-current submerged arc welding, gas shielded welding and carbon arc air gouging.
它能提供多种高性能的焊接模式，如恒压埋弧焊、恒流埋弧焊、气保焊、碳弧气刨。
In this paper, the inhibition treatment of the copper plating wire used in co 2 gas shielded arc welding is dealed with.
对二氧化碳气体保护焊镀铜焊丝进行了缓蚀处理试验。
The joint microstructure and mechanical properties of high strength bainitic steel plate were studied by CO2 gas shielded welding(CGSW), submerged arc welding(SAW) and manual arc welding(MAW).
利用二氧化碳保护焊、埋弧焊、手工电弧焊研究了高强度贝氏体钢板焊接接头的组织和力学性能。
7a52 aluminum alloy was welded by using 5a56 filler with twin wire gas shielded arc welding.
采用5a56焊丝对7a52铝合金进行双丝气体保护焊，对焊接接头的力学性能和显微组织进行了研究。
7a52 aluminum alloy was welded by using 5a56 filler with twin wire gas shielded arc welding.
采用5a56焊丝对7a52铝合金进行双丝气体保护焊，对焊接接头的力学性能和显微组织进行了研究。
应用推荐