The relative sliding ratio formulas of an involute internal spur gear pair are developed.
推导了渐开线内齿轮副相对滑动率的计算公式。
Moreover, a gear pair with curvilinear - tooth traces operates without axial thrust force.
除此之外，具有曲线型齿线之齿轮在运转时亦不会产生轴向的推力。
This paper briefly expounds the manufacturing principle of the worm-gear pair with the involute envelope fair.
本文扼要阐明了“渐开面包络环面蜗杆付”的加工原理。
The design of involute planetary gear pair with a slightly different tooth number of zero restraint is introduced.
文中还介绍了零约束渐开线少齿差行星齿轮传动的机构设计。
Movement system of blades realized throughout bevel gear pair, which are assembled inside of oil-bath-tight carter.
通过锥齿轮副实现转运系统，锥齿轮副组装在油浴式卡箍的内侧。
Static transmission error of helical gear pair is a primary parameter to evaluate the dynamic property of the gear pair.
齿轮副静态传递误差是衡量齿轮副动态性能的一个主要参数。
By using the same alternate blade cutter, bi-arc spiral bevel gear pair with equal-height tooth can be produced on the Gleason machine.
用同一双面刀盘在格里生机床上成功地切出了等高齿双圆弧弧齿锥齿轮副。
Considering the time varying meshing stiffness of gear pair, the nonlinear dynamic model of a geared rotor bearing system is established.
在考虑齿轮时变啮合刚度的情况下，建立了齿轮耦合的转子-轴承系统的非线性动力学模型。
According to the result of interference test, the cutting tooth parameter is adjusted till the satisfied spiral bevel gear pair was acquired.
根据干涉结果对螺旋锥齿轮的切齿参数进行调节，直至得到比较满意的螺旋锥齿轮副。
Through the analysis on the example of surveying, mapping and manufacturing of high-speed gear pair, some improving measures are put forward.
通过对高速齿轮副测绘制造的实例分析，提出了几种改进措施。
Analysis of the forming principle of tooth flank of modified type worm gear pair was based on different geometry and spatial engaging theory.
基于微分几何和空间啮合理论，分析了修正型圆环面双包络环面蜗杆副齿面形成原理。
The harmonic drive gear pair which are manufactured on the principle of "Converted Engagement Reappearance" can conform to the Willis theorem.
按上述原理设计加工出的谐波传动齿轮副能够符合齿廓啮合基本定理。
Because of the meshing stiffness of a gear pair, the governing equation denotes a linear dynamic system with periodic time-varying coefficient.
由于齿轮副啮合刚度的影响，动力学方程序代表了一个具有时变系数的线性动力系统。
Thus it can been seen that, after mending tooth shape of the worm, the Wildhaber-worm gear pair sensitivity to errors has been greatly reduced.
由修形后传动副的接触状态分析可见，传动副对误差的敏感性已大大降低。
The crowned teeth gear circumferential restriction gear pair is an important part of the differential hydraulic motor with bevel gear transmission.
鼓形齿轮周向限制副是锥差式液压马达的重要部件，鼓形齿轮的加工质量直接关系到周向限制副的各项性能指标。
The decelerator of precision fabrication, with the worm gear pair made of high-quality special alloy, guarantees the machine wear-resisting and ultra quiet.
精密加工制造的减速器，蜗轮副采用高品质的特殊合金，保证整机耐磨损，超静音。
The crossed helical gear engagement principle is applied to gear machining and measuring widely. The crossed helical gear pair meets the point engagement principle.
交错轴斜齿轮啮合原理广泛应用于齿轮加工及测量，其特点是齿轮副满足点啮合原理。
Power is delivered to a spline shaft by a power output shaft of a tractor via a universal transmission shaft, an input shaft of a gear box, and a conical gear pair in mesh;
动力由拖拉机的动力输出轴，通过万向传动轴、传动箱的输入轴、经互相啮合的圆锥齿轮付传递至花键轴；
Based on an analysis of gear cutting principle and basic motion of klingelnberg spiral bevel gear, the modeling is carried out by taking parameters of a gear pair as example.
在分析克林·贝格螺旋锥齿轮切齿原理和基本运动的基础上，以一对齿轮副参数为例进行建模。
After building the equations of tooth surfaces and the meshing model of a spherical gear pair, tooth contact analysis of spherical gear pairs is performed through simulation.
在建立了球齿轮齿廓曲面方程和啮合模型基础上，利用计算机仿真的方法对其进行了齿面接触分析研究。
Secondly, according to the requirements for deformed elliptical gear pair with same parameters, the design method and principle for deforming elliptical gear pair is presented.
其次，根据一对变性椭圆齿轮副参数相同的要求，提出了相应的设计原则和方法。
Threshold rattling speed not only depends upon the frequency and amplitude of the errors of a gear pair, but also time-varying meshing stiffness and their combination frequency.
齿面误差对拍击门槛转速的影响不仅与自身的变化频率、幅值大小有关，更重要的是与时变频率及其组合频率有关。
There are many influential factors for backlash of the gear pair. This paper studied various factors and discussed the calculating methods and steps on backlash of the gear pair.
本文在分析各种影响齿轮副侧隙因素的基础上，讨论齿轮副侧隙的计算方法和步骤。
To determine the internal gear pair design parameters of two-stage internal contact involute planet gear reducer all constrained conditions from machining to assembly must be satisfied.
确定双内啮合渐开线行星齿轮减速器内齿轮副的设计参数，从制造到安装有许多限制条件。
The paper researches the spectrum characteristics of dynamic response of the gear pair with the error excitation in the long and short period based on dynamic mating model of the gear pair.
基于齿轮副的动态啮合模型，对具有误差激励的齿轮副按长、短周期从理论上研究了其动态响应特征。
In addition, the gear-pair return clearance can be adjusted and eliminated through the repeated assembly of gear pairs and the rotary drums, so as to improve the utilization rate of equipment.
同时齿轮副回程间隙可通过齿轮副与转鼓间的重复装配调整消除，提高了设备利用率。
The influence of percentage of gas in oil, slope of side plate, effective bulk modulus, and centrifugal force and gear pair vibration on trapped oil pressure is studied by numerical simulation.
采用数值模拟方法研究了含气比，侧板倾斜，有效体积模量，离心力和齿轮副的振动等因素对困油压力的影响。
The model is used to understand a series of formulae, for example, mean single tooth stiffness, gear pair mesh synthesizing stiffness, effective mass, nature frequency and critical rotating speed.
根据这一振动模型，推导了齿轮副的平均单齿刚度、单对轮齿啮合综合刚度、有效质量、固有频率与临界转速等一系列计算公式。
The simulation model of the trapped oil pressure is established in the paper, and the model is divided into static model and dynamic model according to with or without dynamic factor of gear pair.
依据模型中是否考虑齿轮副的动力学分析，将困油模型分为静态模型和动态模型。
Finally, the characteristics of incomplete information and the redesign method for used parts are applied in the process of remanufacturing worm-gear pair to validate the practicality and efficacy.
最后，以废旧蜗轮蜗杆零部件为对象，对废旧零部件残缺信息特征以及基于残缺信息的废旧零部件可重用再设计方法进行验证和初步应用。
应用推荐