Draining glass melt by water quench has become a key technology to cold repair.
水淬法放玻璃水已成为冷修放水的关键技术。
Static experiments on the corrosion of tailing glass melt to silicon carbide and silicon molybdenum refractories were made.
运用静态实验的方法，以尾矿玻璃熔体对碳化硅和二硅化钼耐火材料进行了侵蚀试验。
Thus, the quantitative relations between the fusion quality and the fields of velocity and temperature for glass melt were found.
这两个指数建立了玻璃熔制质量与玻璃液速度场和温度场的定量关系。
The reform of partially Pt-substituted bushing furnace is an important measure to improve the quality of glass melt and the fiber drawing process.
对于不具备制球条件的玻纤企业，代铂炉型的改进是改善玻璃液质量，提高拉丝作业水平的重要措施。
For a number of years, glass melting technologies have been based on heating glass with the radiant energy from flames fired horizontally above the melt.
多年来，玻璃熔融工艺都是通过高于玻璃熔点的横烧火焰所产生的辐射能来加热玻璃的。
In the present research, surface tension and density of borosilicate melts were measured and compared to that of Na-Ca containing glass melt using sessile drop method.
采用静滴法测量并对比典型低膨胀硼硅酸盐玻璃和普通钠钙硅玻璃的熔体密度和表面张力。
Practice shows that the infrared thermometer can be used for accurately measuring glass melt and plate temperature, which plays an important role in stabilizing temperature inside glass furnace.
实践证明，红外测温仪在优质浮法玻璃生产过程中，能直接精确检测玻璃液或玻璃板的温度，为稳定工艺温度制度起到重要作用。
Occasionally, a bubble is not removed during refining, a sand grain refuses to melt, a tremor in the tin puts ripples into the glass ribbon.
"有时候，在提炼的过程中会出现这些情况：一个气泡没有被移除，一个砂粒没有熔化，（熔融的）锡的一次颤动把波纹带进了玻璃带中。
Machine operators in this unit group operate multi-function process control machinery or single function machines to melt, form, cut or finish flat glass, glassware, bottles, and other glass products.
本单元组的机器操作员操作多功能过程控制机械或单一功能的机器，融化，形成，切断或完成平板玻璃，玻璃器皿，酒瓶，玻璃及其他玻璃制品。
By observing of the melt course and by analyzing the measurements of glass samples, the feasibility of nepheline syenite as raw materials for the green float glasses was discussed.
通过对熔化过程的观察和对玻璃样品有关性能测试结果的分析，讨论了霞石正长岩作为绿色浮法玻璃原料的可行性。
Why do the artists in Japanese society rake sand into patterns; and the artists in Roman society melt sand to form glass?
为什么日本社会耙沙艺术家到模式，并在罗马社会的艺术家沙子融化形成的玻璃？
By observing the melt course and analyzing the measurements of glass samples, the feasibility of nepheline syenite replacing part of raw material for the float glass is discussed.
通过对熔化过程的现察和对玻璃样品有关性能测试结果的分析，讨论了霞石正长岩作为浮法玻璃原料的可行性。
The unique thermodynamic behaviors of metallic melt and metallic glass are analyzed, and the atomistic mechanisms are discussed.
研究了纳米尺度下金属熔体与金属玻璃独特的热力学行为，并分析了其内在的原子机制。
The buildings are connected through light steel and transparent glass elements, highlighting the stone volumes and allowing the boundary between in and out to melt.
建筑通过轻型钢和透明玻璃构件来连接，突出石质体量，使内外之间的边界渐渐消失。
The film index is higher than that of bulk glass of the same composition as the target, but prepared by rapid quenching from the melt.
薄膜折射率高于与靶成分相同的体型玻璃折射率，而此玻璃是由熔体迅速冷却制得的。
Then, slowly, slipping and sliding down the glass, it would melt, its beauty fleeting.
于是，它在窗上慢慢地滑落，然后融化，它的美丽也倏地消失。
Volcanic ash can clog up and damage jet engines while the tiny particles of glass in the ash can also melt and block the ventilation holes which can cause the engines to overheat and stop working.
火山灰中的细小玻璃态物质，会融化然后堵塞住散热孔，导致引擎过热熄火。
Cut and arrange various glass pieces into a unique design, and melt them together in the kiln.
自己动手设计、剪切和组合不同的玻璃片，放置在小窑炉中用高温将玻璃充分融为一体。
The results show that IR radiation spectrum is also one of effective (methods) means of studying glass and melt structure. A new road is found for the structure study of glass, specially melt.
研究结果表明：红外辐射光谱同样是研究玻璃及其熔体结构的一种有效方法。
The hot melt adhesive was extruded into film by an extruder and then was compounded hotly with crosslinking polyethylene flat and glass fibre net with large holes so the fixing flat was obtained.
用挤出机将其挤成胶膜后与交联聚乙烯基材，大孔径玻璃纤维网热复合制成固定片。
The hot melt adhesive was extruded into film by an extruder and then was laminated hotly with crosslinking polyethylene flat and glass fibre net with large holes so the fixing flat was obtained.
用挤出机将其挤成胶膜后与交联聚乙烯基材，大孔径玻璃纤维网热复合制成固定片。
Ir radiation spectrum of the silicate glass and its melt were successfully obtained first and analyzed. The structure information of the glass and its melt was obtained by analyzing.
获得了硅酸盐玻璃及其熔体的红外辐射光谱，并对其进行了分析，得到了玻璃及其熔体的结构信息。
Influence of inorganic pigments on toner morpology and relations of toner composition with glass transition temperature, soften temperature and melt index were investigated.
墨粉的玻璃化转变温度、软化 点、熔融指数与墨粉组成的关系；
Lithium silicate photosensitive glass doped silver is fabricated by means of high temperature melt in silica crucible.
采用高温熔融法制备了银掺杂的锂铝硅酸盐微晶玻璃。
Composite was prepared with melt dipping that PA6 enhanced with the long glass fibre.
采用熔体浸渍工艺制备长玻纤增强PA 6复合材料。
Products include: hot melt marking paint, normal temperature reticule coating, a two-component coatings, concussion marking paint, glass beads, coating agent under various road marking paint.
产品有：热熔标线涂料、常温标线涂料、双组份涂料、震荡标线涂料、道路划线设备、玻璃微珠，下涂剂等各种道路标线涂料。
Products include: hot melt marking paint, normal temperature reticule coating, a two-component coatings, concussion marking paint, glass beads, coating agent under various road marking paint.
产品有：热熔标线涂料、常温标线涂料、双组份涂料、震荡标线涂料、道路划线设备、玻璃微珠，下涂剂等各种道路标线涂料。
应用推荐