WO_ (3) electrochromic films were prepared on ITO glass substrates by the sol-gel method.
采用溶胶-凝胶法，在氧化铟锡(ito)玻璃基质上制备氧化钨电致变色薄膜。
A drop-on-demand ink-jet printer has been used to print a silver-organic solution onto glass substrates.
一种按需滴墨的打印机已经用来打印银有机溶剂在玻璃基材上面。
The new technique and new equipments for cleaning the glass substrates of flat panel displays are described.
本文介绍清洗平板显示玻板的新工艺新设备。
Coating apparatus, method of coating glass, compounds and compositions for coating glass and coated glass substrates.
涂覆玻璃的设备和方法，涂覆玻璃的化合物和组合物，涂覆的玻璃基体。
Various Pd films prepared on glass substrates by magnetron sputtering in vacuum or O2 ambience were used as catalysts.
结果表明，在真空气氛下磁控溅射的钯膜上无法生长碳纳米管。
High quality ITO films are prepared onto K9 glass substrates by oxygen ion-assisted electron beam reactive evaporation.
采用氧离子辅助电子束反应蒸发工艺在K9玻璃基底上制备了性能优异的ITO薄膜。
ZnO: Al thin films were prepared on slide glass substrates by non-reactive DC magnetron sputtering at room temperature.
采用直流磁控溅射工艺，室温下在载玻片上制备了氧化锌铝透明导电薄膜。
Optical performance: Various glass substrates can be used for IGU to meet the request of sunlight transmission and reflection.
光学性能：根据需要，中空玻璃的基片可选择不同产品灵活组合，以达到需要的太阳光透射率和反射率。
Optical Performance: Various glass substrates can be used for IGU to meet the request of sunlight transmission and reflection.
光学性能：根据需要中空玻璃的基片可选择不同产品灵活组合，达到需要的太阳光透射率和反射率。
By using this method, the technique of laser cut - ring LCD glass substrates is studied both in fracture mechanism and experiment.
采用该技术，从断裂基理和实验验证两方面对激光切割液晶显示玻璃基片进行了一定的研究。
TiOx thin films at the conditions of different depositing temperatures were on prepared on glass substrates by DC reactive magnetron sputtering.
通过磁控反应溅射，在玻璃基底上制备了不同溅射温度下的氧化钛薄膜。
Tin doped indium oxide (ITO) films were deposited on glass substrates by reactive magnetron sputtering using a metallic alloy target (in Sn, 90 10).
采用铟锡合金靶(铟锡，90 - 10)，通过直流反应磁控溅射在玻璃基片上制备出ito薄膜，并在大气环境下高温退火处理。
Zinc oxide thin films were prepared by pulsed laser deposition (PLD) on glass substrates coated with tin-doped indium oxide (ITO) thin films in this paper.
本文采用射频辅助脉冲激光沉积(PLD)系统，在镀有透明导电膜氧化锡铟(ito)的玻璃衬底上制备了氧化锌薄膜。
Homogeneous and transparent thin nanostructured titania films doped by Y3 + were prepared on glass substrates by sol gel processing and dip coating technique.
用溶胶-凝胶法和浸渍-提拉法工艺，在玻璃表面上制备了均匀、透明的钇离子(Y3 +)掺杂二氧化钛纳米薄膜。
This paper studies a scheme which uses the image as a detection signal, to achieve the precise positioning between the front and the back PDP glass substrates.
本文研究了一种采用图像作为检测信号，实现前、后玻璃基板之间的精密定位的定位方案。
It is shown from the analysis of glass ingredients of different glass substrates that the alkali metal content in glass may affect the photocathode sensitivity.
通过不同玻璃基底玻璃成分的研究，证明玻璃中的碱金属的含量会影响到光阴极灵敏度的高低。
The films of different color were deposited on the glass substrates with different experimental conditions, the resistivity of different color films was measured.
在玻璃衬底上改变实验条件沉积了不同颜色的薄膜，测量了不同色泽薄膜的电阻率和制备条件的关系。
Because glass substrates can sustain high toughness and strengh even when they are extremely thin there has been uprated to match the hard-disk technology development.
并且玻璃盘基在很薄的情况下依然能保持较好的刚度和硬度，更符合硬盘技术的发展趋势。
UV curable materials as a polymer matrix and a nematic liquid crystal with positive dielectric anisotropy are mixed and sandwiched between ITO coated glass substrates.
混合紫外光固化的聚合物基质和具有正介电各向异性的向列相液晶，并将混合物注入到以ito玻璃为衬底的液晶盒中。
Mercaptopropyltrimethoxysilane (MPTS) was used to form self- assembly monolayers (SAMs) on glass substrates by solution extraction, which was checked with XPS and AES.
用三甲氧基巯基丙基硅烷作偶联剂，通过溶剂抽提法获得单分层自组装巯基化 的玻璃。
Compared to the LCD using two glass substrates, our new device exhibits a comparable contrast ratio (514:1), driving voltage, and response time because of good LC alignment.
良好的液晶取向性能使新器件的对比度(514：1)、驱动电压和响应时间都能够与双玻璃基板LCD相比拟。
Optical properties and adhesion of Ag films with Cr interlayer of different thickness on glass substrates were investigated by using spectrophotometer and X-ray diffraction (XRD).
研究了在玻璃基底上采用不同厚度的铬膜作过渡层，对银膜的光学性质及其附着力的影响。
Further, by stabilizing the processing margin by employing a grindstone 4 made of resin, variations in the dimensional precision in the individual glass substrates can be minimized.
通过试样树脂构成的磨石4可以稳定加工边界，可以使单独玻璃基片的尺寸精度变化最小。
Transparent conductive, tungsten-doped indium oxide(IWO) films with the high carrier molbility were grown by magnetron sputtering on glass substrates, followed by in-situ annealing.
采用直流磁控溅射法在清洁玻璃基片上制备了掺钨氧化铟（IWO）透明导电氧化物薄膜。
In this paper, based on the technique of laser micro-fine cladding and flexibly direct writing, micro-fine conductive lines of high quality and high property are fabricated on glass substrates.
设计了一种具有方形光斑的新型激光直写系统，用双远心投影透镜组获得方形光斑并以逐点光刻模式运行， 改善了衍射图形光刻质量， 提高了系统运行效率。
Lead oxide in glass used for bonding front and rear substrates of flat fluorescent lamps used for Liquid Crystal Displays (LCD).
液晶显示器中焊接前后平版萤光灯基质的玻璃中的氧化铅。
Where some print technologies only work with flexible media, UV and UV-LED can be used with many different substrates, including specialty substrates such as glass and wood.
有些喷印技术只能用于灵活的介质，而UV和UV - LED可以用于多种不同的介质，包括特殊介质，例如玻璃和木制品。
Patterned crystallization of amorphous silicon (a-Si) on substrates of glass is very important for the fabrication of thin film transistor used in active matrix liquid crystal displays.
以玻璃为基底的非晶硅图形式结晶，对于研制用于矩阵液晶显示的薄膜半导体具有重要意义。
The adhesive strength of the films to the substrates, diamond-coated tool wear and surface roughness of the workpiece were further studied by turning glass fiber reinforced plastic cylindrical bars.
通过玻璃纤维增强塑料的车削试验，研究了薄膜与基体之间的附着强度、涂层刀具的磨损和加工工件的表面粗糙度。
The adhesive strength of the films to the substrates, diamond-coated tool wear and surface roughness of the workpiece were further studied by turning glass fiber reinforced plastic cylindrical bars.
通过玻璃纤维增强塑料的车削试验，研究了薄膜与基体之间的附着强度、涂层刀具的磨损和加工工件的表面粗糙度。
应用推荐