Pouring concrete mixture into the sea immediately started the hardening process and rather than just dissolving in the mass of water, the substance was tough and long-lasting.
将混凝土混合物倒入大海后立即开始硬化过程，而且该物质非但不会在水中溶解，还保持坚硬耐久。
To speed up the hardening process, artificial aging is employed.
加快硬化过程中，人工时效是就业。
The case hardening process results in gears that have much harder surfaces than cores.
局部淬火处理的齿轮具备比心部组织硬度高的表面硬度。
'a traditional hardening process gives the leather a beautiful ombre effect,' it continues.
“传统的硬化处理可在皮革上做出精美的云纹。”产品介绍补充道。
The effect of fly ash during the hydrating and hardening process of composite binder was studied.
分析了粉煤灰在复合胶凝材料水化硬化过程中的作用。
Various factors which affect the intercritical hardening process of U shaped steel have been studied.
对影响U型钢亚温淬火工艺的各因素进行了试验。
Because of the continuous energy accumulation of stress concentration units, hardening process of medium emerges.
应力集中单元由于能量的不断积累，介质出现硬化过程。
Through analysis and tests, the authors selected corrosion resistant nitrogen case-hardening process to replace chrome plating.
通过分析和试验，我们采用了抗蚀渗氮取代电镀铬工艺。
Therefore, stopping the hardening process of particles from growing is the key of increasing CO2 sodium silicate sand bond strength.
所以，提高CO2水玻璃砂粘结强度的关键在于抑制硬化过程中胶粒的过于长大。
For horses with oc, the cartilage at the top of certain growth plates does not undergo the normal hardening process and may break down.
患有骨软骨病的马，在某些长骨端的骺板，不进行正常的硬化过程，甚至可能会碎裂。
The moral structure, created by the mind to hold social relationships together, is not love, but a hardening process like that of cement.
道德的结构是由思想建立的以维系社会关系的统一，但这不是爱，而是一个水泥般的硬化过程。
Baking, also known as baking, baking, burning the material is under way through the dry heat to dry the material hardening process of dehydration.
烘焙，又称为烘烤、焙烤，是指在物料燃点之下通过干热的方式使物料脱水变干变硬的过程。
Just add a couple of tablespoons of white vinegar to your plaster mix. It will slow down the hardening process to give you the extra time you need.
加几汤匙白醋在石膏里，这样石膏就会凝固得慢从而让你有足够的时间来打理一切了。
Hardening: Case hardening process whereby the carburized outer surface is made hard and strong while the center (core) is made tough and flexible.
淬火：是使渗碳的表面变硬，芯部变得有柔韧性的表面硬化工艺。
The feature of hardening layer is usually expressed by its hardness and depth, and the micro-structure of its material is determined by the hardening process.
硬化层的特征通常由它的硬度、深度来表征。硬化层材料的微观结构又取决硬化过程。
The results show that the addition of SiC_p and TC4_p accelerates the age-hardening process of MB15 alloy despite without altering its basic ageing mechanism;
结果表明，增强颗粒的加入加速了MB15的时效速度，但并未改变其时效硬化的基本规律；
In the paper, strength properties, hydration and hardening process of high-temperature geothermal well cement are studied under different hydrothermal conditions.
研究了由不同配比的高抗硫g级水泥与石英砂粉组成的高温地热井水泥在不同水热条件下的强度性能及其水化硬化过程。
Therefore, the conventional heat treatment process after forging can be replaced by the new ausform hardening process, to save energy and improve production efficiency.
因此，新的锻热淬火工艺可以代替传统的锻后热处理工艺，达到节能降耗、提高生产效率的目的。
The formation of the residual stress during hardening process of the resin coated sand was analyzed, and some main measures to control the residual stress were proposed.
分析了覆膜砂固化中残余应力的形成过程，提出了一些用于控制残余应力的主要工艺措施。
Temperature field in the laser hardening process was numerically simulated by MSC. Marc software. The calculated results are in good agreement with the experimental results.
采用有限元软件对激光强化过程中的温度场进行数值模拟，数值模拟结果与实验结果符合较好。
Surface induction-hardening offers the possibility to selectively harden a component's raceway, while leaving the remainder of the component unaffected by the hardening process.
表面感应淬火提供有选择地淬硬部件滚道而部件的其余部分则不受淬火过程的影响的可能性。
With the increased angularity index of the manufactured sand, the fluidity of the new mortar is becoming bad but the intensity and contractibility is improving after the hardening process.
随着机制砂棱角性指数的增大，新拌砂浆的流动性变差，但硬化后砂浆的强度和收缩性能得到适当的改善。
The simulation on medium frequency induction hardening process of crankshaft in 6110 engine is carried out by using FEA software ANSYS with hardening depth predicted and residual stress calculated.
利用A NSYS有限元分析软件，进行了6 110钢曲轴的中频感应淬火过程的模拟计算，并预测了淬硬层的深度，计算了淬火后的残余应力分布。
In the next section, I begin the process of hardening our installation.
在下一节中，我将开始加固我们安装的过程。
Hardening. This is the process of heating to a temperature above the critical range, and cooling rapidly enough through the critical range to appreciably harden the steel.
淬火。这个工艺是把材料加热到临界温度范围之上，然后迅速冷却到临界温度范围以下，使钢材明显变硬。
In the conservation process, the control should be in favor of hardening concrete strength and growth temperature environments.
在养护过程中，应控制混凝土在有利于硬化及强度增长的温度环境中。
CONTROLLED COOLING: Process by which steel is cooled from an elevated temperature in a predetermined manner to avoid excessive hardening, cracking or internal damage.
强制冷却：将高温钢材强制冷却到设计温度的工序，可防止钢材硬化过度，破裂或者内部损伤。
Experimental results show IL correction method can eliminate beam hardening effect and suppress the projection noise enlargement effectively in correction process.
实验结果表明，IL校正法能去除射束硬化的影响，并能有效地抑制校正过程中投影噪声的放大。
Improper forging process will also appear large grain or uneven, hardening crack phenomenon, forging cost is higher than the casting flange.
锻造工艺不当也会出现晶粒大或不均，硬化裂纹现象，锻造成本高于铸造法兰。
Improper forging process will also appear large grain or uneven, hardening crack phenomenon, forging cost is higher than the casting flange.
锻造工艺不当也会出现晶粒大或不均，硬化裂纹现象，锻造成本高于铸造法兰。
应用推荐