The paper introduces the principle and design of an automatic control system for classroom lighting, and hardware composing and software design of this system in detail.
本文介绍了这种新型教室节能控制系统的工作原理及设计方案，并且阐述了本系统的硬件组成和软件设计。
This paper presents application of PLC in a plate shearing machine control, and expounds the design the hardware and software of the system in detail.
介绍了可编程控制器(PL C)在自动剪板机控制中的应用，对系统的硬件和软件设计作了较为详细的阐述。
Bases on analyzing the control schemes of system, the design methods of software and hardware, as well as the function and benefit accomplished by the system are described.
在分析系统控制方案的基础上，阐述了系统的硬件和软件设计方法，以及系统实现的功能和效益。
The software and hardware design for synchronization generation, the formation of video, graphic display and control system are discussed.
对其同步信号产生、视频信号形成以及图形处理和控制的软硬件设计进行了讨论。
And the specific hardware system structure, control slug and the design of drive software and the transmission performance of PCI bus for nuclear spectrometry were also set forth.
并对PCI总线在氡室检测系统中的具体硬件系统结构、控制芯片与驱动软件设计，与PCI总线对核谱转换的传输性能作了阐述。
Firstly, the thesis finished the design of the second stage of technical improvement scheme, including selection of control system, connection of network and hardware configuration.
论文首先介绍二期改造系统设计方案，包括系统的选型、计算机网络的连接和硬件的配置。
This paper introduces the control system of elevator based on CAN bus, analyses its hardware and software and provides hardware design and flow chat.
本文介绍基于CAN总线的电梯控制系统，并对总体方案、软硬件设计作了分析，给出了具体设计电路以及软件流程图。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
This paper also gives the system components and the control method of the hardware and software design.
文中同时给出了系统组成，以及控制的软硬件设计方案。
Based on the design of global structure and hardware of the control system, detailed program flow design of automatic coal stuffing and slag removing is presented.
在控制系统总体结构设计和硬件设计的基础上，详细论述了自动加煤和自动除灰的程序流程设计。
The application of PLC in the control system of platform booms, the hardware and software design method of PLC control system are presented and discussed.
介绍了PLC在舞台吊杆控制系统中的应用，以及PLC控制系统的硬件和软件的设计方法。
I have completed hardware design of micro-control system, software writing and debugging.
己完成了单片机通信控制系统硬件设计和软件编写与调试任务；
The dissertation consists of hardware design, driver development, CAN bus control system composing.
本论文包括硬件设计、驱动程序开发和组成CAN总线控制系统三部分。
Making the most of electromechanical facility to control the hardware resource of PLC in the system can simplify the design of hardware in diagnosing system.
充分利用机电设备控制系统中plc的硬件资源，可简化诊断系统的硬件设计。
In this paper, we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.
介绍了以AT 89s52单片机为核心的金相切割机控制系统原理和软硬件设计方法。
It detailed introduced composing of the PLC elevator control system, design of the hardware and soft, how to weave control program in graph of elevator for example.
以实例介绍了PLC电梯控制系统的组成、其硬件和软件的设计以及怎样用电梯图来编制系统的控制程序。
On the basis, it completes hardware configuration and software design of chemical water treatment control system.
在此基础上完成了电厂化学水处理控制系统硬件配置和软件设计。
Based on the analysis of the theory of vulcanization, the control of rubber vulcanization, the construction of microcomputer control system, hardware and software design were described.
在分析橡胶硫化机理的基础上，阐述了胶料硫化的控制方法、微机控制系统的组成、硬件配置和软件设计。
This paper introduced the design method and research process of the control system, including hardware design, software design and so on.
本文论述了控制系统的设计方法和设计过程，包括硬件设计、软件设计等方面。
This paper presents bushless DC motor servocontrol system based on DSP, then makes a brief about control strategy and design scheme of software and hardware that realizes this control system.
介绍了一种基于DSP的无刷直流电机伺服控制系统，简述了实现该控制系统的软件和硬件设计方案及控制策略。
The article has detailed the hardware and software design of this microcomputer control system.
详细介绍了这个微机控制系统的硬件电路及软件设计。
The design of control node of home network control system is described. The design includes hardware, software, and the development of wireless communication protocol.
介绍了家庭网络控制系统的控制子节点设计，控制子节点的软硬件的设计与开发，无线通信协议的设计与开发。
The methods of design, composing and realization of software and hardware of system for intelligent distributed fire alarming control system.
给出了一种分布式智能火灾报警控制系统的设计方法及系统软硬件的组成和实现。
Overall design scheme, the composition of control system, hardware construction and software control flow are given in detail., design philosophy of hardware and software is established.
详细介绍了总体设计方案、控制系统的组成、硬件结构及软件控制流程，确立了硬件、软件的设计原则。
The application of CAN BUS controller in milling machine was described, the design of hardware and software in driving control system was introduced.
介绍了CAN总线控制器在铣刨机系统中的应用，同时介绍了其行走控制系统的硬件、软件设计。
The configuration of the computer system, system hardware and software design are presented. Also, the control results of the system are introduced in detail.
介绍了计算机系统配置、系统硬件配置及软件设计，还详细介绍了系统控制效果。
This paper presents a design of distributed supervisor control system of communication power system, including the hardware structure and the design of software.
本文介绍了一种通信电源分布式监控系统的设计方案，包括监控系统的硬件组成和软件设计。
This article introduced the design principle of vacuum control system, discussed the system composing and design of hardware and software, gave some experiment result.
本文介绍了真空实时远程监控系统的设计要求，讨论了该系统的硬件设计、软件设计及其工作原理，给出了部分实验结果。
This article introduced the design principle of vacuum control system, discussed the system composing and design of hardware and software, gave some experiment result.
本文介绍了真空实时远程监控系统的设计要求，讨论了该系统的硬件设计、软件设计及其工作原理，给出了部分实验结果。
应用推荐