HDPE is a stronger type of plastic.
高密度聚乙烯是一种更为坚固的塑料。
HDPE with zinc coated steel nail.
HDPE及优质镀锌钢钉。
The mechanical performance is improving with the increasing of HDPE.
力学性能随HDPE含量的增加而有所提高。
The crystalline process of HDPE was obstructed and restricted by PET.
HDPE的结晶过程受到了PET的阻隔、约束作用。
The main production of LDPE, or HDPE bottom bags device. Without pulling.
主要制作LDPE、HDPE的平口袋的设备。无张力，烫线平整美观。
HDPE pipe to connect the use of hot-melt or fused welded casing connection.
管采用热熔对焊连接或电熔套管连接。
For HDPE pipe material, the weibull stress maybe an effective fracture parameter.
对于HDPE管道材料，威布尔应力可以作为有效的断裂控制参量。
HDPE can become continuous phase when rubber particles is wrapped up by enough HDPE.
只要HDPE足以包裹胶胶粒子就可以形成连续相。
This is because of the very good compatibility between the additives and HDPE matrix.
这是因为卤锑阻燃剂与聚乙烯树脂基体间有很好的相容性。
The main production of LDPE, HDPE film bags in cardboard boxes and flat pocket device.
主要制作LDPE、HDPE薄膜的纸箱内包装袋及平口袋的设备。
The mechanical properties and fluidity of HDPE/vulcanized rubber powder blend are studied.
研究了HDPE/硫化胶粉共混材料的力学性能和流动性能。
The mechanical property of HDPE is studied using a self-made pressure vibration injection device.
采用自行研制的压力振动注射装置对HDPE进行了力学性能的研究。
The composite which can replace the wood was made by wood flour and high density polyethylene(HDPE).
用木粉与高密度聚乙烯（HDPE）复合制备了能代替木材的复合材料。
Furthermore, the apparent viscosity of HDPE was reduced, which could increase the extrusion efficiency.
同时使体系的粘度也有所降低，提高挤出效率。
Effects of reaction time, ozone concentration and reaction temperature on oxidation of HDPE were studied.
研究了反应时间、臭氧浓度和反应温度对HDPE氧化程度的影响。
HDPE can cause stress cracking easily with affection of environment, which limits its application in industry.
HDPE易受环境的影响产生应力开裂，这限制了其在工业上的应用。
The paper introduces the research, properties and application of HDPE/GRP ash pipes used in fire power plants.
本文介绍了热电厂除灰用HDPE／玻璃钢复合管的研制过程、复合管性能和使用情况。
The most common types, PET (type 1) and HDPE (type 2), are collected separately; the rest go into a mixed-plastics bin.
两种废料都要单独进行收集，即最常见的废料（PET-第一类）与高密度聚乙烯（HDPE-第二类）要分开收集，其余的废料会被投入一个混合塑料品垃圾箱。
Toilet partitions constructed of High Density Polyethylene (HDPE) or High Density Polypropylene will not be acceptable.
采用高密度聚乙烯（HDPE）或高密度聚丙烯材料制作的卫生间隔断是不可接受的。
The raw material and the optimum processing conditions which were suitable for production of HDPE filaments were discussed.
对适合生产聚乙烯单丝的原料和单丝的最佳生产工艺条件进行了探讨。
Plastic-wood composite materials were prepared from wood flour, PP, HDPE and LDPE and their mechanical properties were compared.
采用木粉分别与聚丙烯（PP）、HDPE、低密度聚乙烯（LDPE）制备了塑木复合材料，并对其性能进行比较。
The technical modification of the Discharge Unit in HDPE Plant is to update the backward OPDS into advanced IPDS discharge technology.
HDPE装置出料系统的技术改造，是把原落后的O PDS出料技术改造为先进的IPDS出料技术。
The superiority of HDPE used in barrier layer of landfill was expatiated through the comparison of several manmade composite materials.
通过对几种人工合成材料的比较，阐述了高密度聚乙烯（ HDPE）土工膜在生活垃圾填埋场防渗层中应用的优越性。
The failure reasons of KNT-30 type Gear-pump's rotors in HDPE plant are analyzed. Wholly local manufacture of the rotors is introduced.
分析了聚乙烯装置中KNT - 30型齿轮泵转子的失效原因，介绍了齿轮泵转子的国产化制造过程。
A small amount of high molecular weight HDPE was added into relative low molecular weight HDPE under compound stress field to extrude pipe.
将少量相对高分子量的高密度聚乙烯(HDPE)加入到相对低分子量的通用级HDPE中，在复合应力场作用下挤出制成管材。
Remember to plan where the screws go, how you will cut your parts out of sheets of aluminum, HDPE, or cereal boxes, and to balance the weight.
在设计的时候在要记得，计划好钻孔的位置，如何从铝板料，聚乙烯或谷类食品盒上切割零件，还要平衡重量。
The effects of ultrasonic irradiation power and irradiation time on processing and mechanical properties of HDPE during extrusion were studied.
研究了在挤出过程中超声辐照功率和时间对高密度聚乙烯(HDPE)加工流变性能及力学性能的影响。
At last, the paper presents application of technology of new materials HDPE file in preventing frozen damage in environmental health engineering.
最后，介绍了新型材料HDPE膜技术在环境卫生工程中预防冻害的应用。
Firstly HDPE/MMT flame retardant composites and coal modified HDPE/MMT flame retardant composites are prepared through melt intercalation method.
首先通过熔融插层法制备了HDPE/MMT复合阻燃材料和煤改性HDPE/MMT 复合阻燃材料。
Firstly HDPE/MMT flame retardant composites and coal modified HDPE/MMT flame retardant composites are prepared through melt intercalation method.
首先通过熔融插层法制备了HDPE/MMT复合阻燃材料和煤改性HDPE/MMT 复合阻燃材料。
应用推荐