The feasibility of the increase production of HDPE with the help of slurry outside circulation technique for the HDPE polymerizer in the Plastics Plant of Yangtse Co.
对扬子石油化工股份有限公司塑料厂高密度聚乙烯(HDPE)装置利用浆液外循环技术实现增产扩容的可行性进行了分析。
The present situation and developing prospect of HDPE pipes' resin and HDPE pipes were introduced. Some investigated enterprises of processing pipes were presented. Some Suggestions were put forward.
介绍了我国HDPE管材专用料、管材的现状和发展前景以及管材加工企业的现状。在调查研究的基础上，提出了一些建议。
The torque and specific energy consumption were increased when blending PET with irradiated HDPE, however, those were decreased by blending PET with HDPE which was irradiated for one month.
辐照的HDPE与PET共混，使共混转矩和比能量消耗增加；但HDPE辐照一个月后再与PET共混，则使共混转矩和比能量消耗降低。
Pl coupling agent could enhance the interface combination between ha and HDPE, and improve the dispersibility and fill content of ha in the HDPE basis.
PL偶联剂改善了HA与HDPE两相界面间的结合性能，提高了HA在高密度聚乙烯基体中的分散度和填充量。
The tank with HDPE membrane flexible floor is a new kind of anti-seepage hydraulic structure, in which the conventional reinforced concrete floor is replaced by HDPE membrane.
HDPE膜柔性底板水池是一种新型抗渗水工构筑物，它采用HDPE膜取代普通水工构筑物的钢筋混凝土底板。
A small amount of high molecular weight HDPE was added into relative low molecular weight HDPE under compound stress field to extrude pipe.
将少量相对高分子量的高密度聚乙烯(HDPE)加入到相对低分子量的通用级HDPE中，在复合应力场作用下挤出制成管材。
The experimental results show that polar groups (mainly carbonyl group) are introduced into the molecular chains of HDPE during electron beam irradiation, the polarity of HDPE is thus increased.
结果表明，通过电子束辐照可在HDPE分子链上引入含氧极性基团，使HDPE的表面自由能增大，极性增强，与水的接触角减小。
Firstly HDPE/MMT flame retardant composites and coal modified HDPE/MMT flame retardant composites are prepared through melt intercalation method.
首先通过熔融插层法制备了HDPE/MMT复合阻燃材料和煤改性HDPE/MMT 复合阻燃材料。
The results of DSC also demonstrated that the compatibilizers made tbe melting points of HDPE reduce, because the copolymers enhanced the compatibility of PVC/HDPE blends.
而DSC的结果表明，增容剂降低了体系中结晶相HDPE的熔点，说明增容剂增加了PVC／HDPE的相容性。
In this thesis elastomers such as nitrile rubber (NBR-40), natural rubber (NR) and ethylene propylene diene monomer (EPDM) are blended with HDPE to improve the shape recovery properties of HDPE.
本文通过丁腈橡胶(nbr - 40)、天然橡胶(NR)、三元乙丙橡胶(EPDM)等弹性体与HDPE共混，提高了HDPE的形状回复能力。
HDPE can become continuous phase when rubber particles is wrapped up by enough HDPE.
只要HDPE足以包裹胶胶粒子就可以形成连续相。
The results show that HDPE/MMT nano-composite and HDPE belong to pseudoplastic fluid and present, shear thinning behaviors within the range of shear stress, shear rate and temperature.
在所研究的剪切应力、剪切速率及温度范围内，两者均属于假塑性流体，呈现剪切变稀行为。
Transmission in the field of mud, as compared with the steel pipe, HDPE pipe has better wear resistance, which means that HDPE pipe with a longer life and better economy.
在泥浆输送领域，同钢管相比，HDPE管道具有更好的耐磨性，这意味着HDPE管道具有更长的使用寿命和更好的经济性。
The results show that the impact strength of PP/HDPE/SBS ternary blends not only related to the content of SBS but also the content of HDPE. The act of HPDE is similar to SBS in toughening of PP.
研究结果表明，PP三元共混物的冲击韧性除与SBS的含量密切相关外，还与HDPE的含量有关，HDPE起到了与SBS相似的增韧作用。
This smooth 60-mil-thick HDPE geomembrane flap was extrusion-welded to the smooth HDPE geomembrane of the permanent liner system, which lay underneath the cell separation berm.
这种顺利 60 米尔厚HDPE土工膜瓣是要躺在下细胞分离天然的永久套系统的平滑 HDPE 土工膜挤出焊接。
Special design for sizing and cooling system by using film and water ring to cool HDPE (PP, ABS) material, which can fit for the requirement of HDPE (PP, ABS).
采用特殊设计的冷却和定径系统，使用水循环冷却HDPE (PP,ABS)原料，适合以上原料的冷却。
Special design for sizing and cooling system by using film and water ring to cool HDPE (PP, ABS) material, which can fit for the requirement of HDPE (PP, ABS).
采用特殊设计的冷却和定径系统，使用水循环冷却HDPE (PP,ABS)原料，适合以上原料的冷却。
应用推荐