The solution is to allow the flippers to cool down without drawing heat away from the rest of the turtle's body.
解决办法是让鳍肢冷却下来，而不把热量从海龟身体的其他部分带走。
Srinivas Garimella at the Georgia Institute of Technology in Atlanta is developing a system in which external heat is used to boil off ammonia vapour from a solution.
亚特兰大乔治亚技术研究院的斯瑞尼瓦斯·盖瑞·麦拉正在开发用外部热源把氨从溶液中蒸发出来的系统。
The percentage of loss, which was only 0.3 percent, was chiefly caused by subjecting the material to intense heat and by failure of proteins to go into solution when the plasma was reconstituted.
损失的比例只有0.3%，并且这些损失主要是由当血浆被再构成时的两个原因造成的，一个是使这种物质受到了强烈的热量，另一个是当蛋白质变成溶液的失败。
Mix the L-cystine, sodium chloride, dextrose, yeast extract, and pancreatic digest of casein with the purified water, and heat until solution is effected.
将L -胱氨酸、氯化钠、葡萄糖、酵母提取物、酪蛋白胰酶消化物与纯净水混合，并加热至实现溶解。
The steady temperature field in irregular plane domain with radiation heat exchange boundary is analyzed by the boundary discrete method, and the solution in form of series is obtained.
采用边界离散方法对具有辐射换热边界的平面非规则域内稳态温度场进行了分析，得到了级数形式的解。
Based on the study of the characteristics of heat and mass transfer of absorption, a numerical model to simulate the process of absorption of LiBr solution is established.
通过对溴化锂溶液在降膜吸收过程中传热、传质特性的分析，建立了垂直降膜吸收过程的数学模型。
A finite volume method was utilized to perform a discrete solution for the equations of mass, chemical components, momentum and heat energy conservation.
利用有限体积方法对质量、化学组分、动量和热量守恒方程进行离散求解。
In the research of the double absorption heat transformer, a new solution cycle is proposed by author.
在双吸收热转换器的研究中，我们提出了一种新的溶液循环方式。
The causes that may induce the leakage of the big-sized flanged heat exchangers were analyzed, and some feasible solution programs were proposed in the design of seal structure.
对可能造成大型法兰式换热器泄漏的原因进行了分析，重点从密封结构的设计方面提出了一些可行的解决方案。
The performance of mass and heat transfer in membrane distillation was investigated with a system of aqueous solution containing more volatile solute (methanol).
本文以稀甲醇水溶液为实验物系，研究了易挥发溶质水溶液膜蒸馏过程的传质和传热性能。
This model mainly studies the effects of force and heat caused by inner arc faults and the numerical solution of the effects are given out.
建立的模型对内部电弧故障引起的力和热的效应规律进行研究，并对这两种效应进行了数值求解。
The GPE made of PVDF has bad solution retention capacity because of crystallization of PVDF and its heat stability has improved after adding PMMA.
由PVDF形成的凝胶电解质由于不断晶化，导致对电解液的保持能力欠佳，用添加pmma的方法改善了其热稳定性。
An apparatus for measuring the heat generated by a chemical reaction, change of state, or formation of a solution.
计装置的一部分，通常是一个盛放样品的容器，待测的热量在其中引起状态变化。
The heat transfer coefficient is obtained by solution of semi-infinity heat conduction theory.
用半无限大导热理论对瞬态导热过程进行换热系数求解。
XD electric heat sterilizer, and finds out the solution of the troubleshooting via analyzing and judging the causes of the malfunction.
XD型电热灭菌器原理和结构，并通过对其故障原因进行分析和判断，找出故障排除的解决方法。
The preparation of nano-Prussian Blue was reported, the course of accumulation, light stability, chemical stability and stability to heat of the Prussian Blue solution were studied.
报导了制备纳米普鲁士蓝的方法，对普鲁士蓝溶液的聚集过程、光照稳定性、热稳定性和化学稳定性进行了系统的研究。
For the transformed solution of the thermoelastic and heat conduction equations coupled problem, the analytical representation of the pole residues is obtained.
利用热弹体运动方程和热传导方程耦合问题的变换域解，求解其极点留数的解析表达式。
Based on the analysis of the existing drawback for MC nylon, a project of solution in anti-frication, toughening, pore-reducing and heat resistance was worked out.
通过对铸型尼龙（MC尼龙）制备工艺中存在问题的分析，在减磨、增韧、减少气孔和耐热性的提高等方面提出了解决方案。
The cutting performances of saw blade by solution and non-solution heat treating were determined.
对比测定了经固溶处理和未经固溶处理锯条的锯切性能。
Establishes the physical and mathematical model of plate solution heat exchanger.
以板式溶液热交换器为例，建立物理数学模型。
The solution of the heat balance equation for gas cooled current leads is presented.
给出了在气冷引线最佳化问题中求解热平衡方程的方法。
It is important to obtain the wavy film flow solution for the purpose of heat and mass transfer calculations.
为了计算波动降膜传热传质，求解得到波动膜流解是非常重要的。
A new method for numerical solution of convective heat transfer problems is presented.
本文给出了一种求解对流传热问题的分步杂交方法。
The design methods, the structure characteristic, the composition and other problems of the Aluminum wheel hub solution heat treatment combined electric furnace were introduced.
介绍了铝轮毂固溶热处理联合电炉的设计方法、结构特点、炉子组成以及需要注意的问题。
Analytic solution of temperature pattern of round heat sources is presented under the changing discharge channel radius with time and fixed input total power.
得到在随时间变化的通道半径和固定输入总功率表面热源条件下的温度场计算公式。
This paper is about construction and characteristics of C194, which are effected by heat-treatment of solution and aging .
研究了C194合金变形与固溶时效热处理工艺条件对其组织性能的影响。
The supercritical fluid has the following unique characteristics: low viscosity, high density, better performance of flow, mass and heat transfer, dis solution and so on.
前言：超临界流体具有黏度低、密度大，有较好的流动、传质、传热和溶解性能等特性。
The heat-transfer area demand of the heat-exchange equipments, such as generator, condenser, evaporator, absorber and solution heat exchanger, are computed.
进行了发生器、冷凝器、蒸发器、吸收器、溶液热交换器等换热设备所需的传热面积计算。
According to the finite element analysis of heat conduction with phase-change by using the enthalpy, an effective numerical method to eliminate the solution of iteration is presented.
通过对采用热焓处理相变导热问题的有限元分析，提出了消除迭代求解的一种有效算法。
According to the finite element analysis of heat conduction with phase-change by using the enthalpy, an effective numerical method to eliminate the solution of iteration is presented.
通过对采用热焓处理相变导热问题的有限元分析，提出了消除迭代求解的一种有效算法。
应用推荐