The process is called combustion or oxidation, and the heat itself is a form of energy.
这个过程我们称之为燃烧或者氧化反应，同时热本身也是能量的一种形式。
A lot of the heat from this combustion goes right out the exhaust system, but some of it soaks into the engine, heating it up.
很多热量从燃烧室散发出来，直接进入废弃排气系统，一部分热量进入了发动机去预热发动机。
Regenerators, which recover waste heat and provide high temperature air, are key components of the regenerative high temperature air combustion system.
蓄热室是蓄热式高温空气燃烧系统实现余热回收和获得高温空气的关键部件。
Construction and working principle of a new design are introduced, combustion and heat transfer performance in the furnace approached.
本文介绍了一种新型的燃煤流化床热风炉的结构和工作原理，探讨了该炉的燃烧和传热特性。
In the classroom teaching of heat of combustion, we should first introduce combustion reaction and then lead to basic concept about it and about standard combustion reaction.
在燃烧热的课堂教学中，先介绍燃烧反应，再引出燃烧热、标准燃烧热的概念。
It is made up of heat accumulation recovery system with high efficiency and reversing combustion system as well as control system.
它是由高效蓄热式回收系统，换向式燃烧系统和控制系统组成。
With the massive amounts of heat that is generated from the combustion process, if the engine did not have a method for cooling itself, it would quickly self-destruct.
由于燃烧过程会产生大量热量，如果发动机无法自我冷却，那么发动机会严重损坏。
The internal combustion engine is a heat engine in which the burning of a fuel occurs in a confined space called a combustion chamber.
内燃机是一种热机，燃料在其被称为燃烧室的密封空间内燃烧。
For a higher efficiency, you can add a heat recovery system to your thermal oxidizer and recover up to 70 % of the combustion heat.
如果您想达到更高的效率，您可以在热氧化机上加一个热回收系统，燃烧热量的回收率可达到70%。
It is widely used on flame control in the combustion control system and air-burner heat system of various industry kiln.
广泛应用于各行业工业炉窑燃烧控制系统及大气烧嘴加热系统的火焰控制中。
Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter, Method of Test for 05.
用氧弹式量热计测定液态烃燃料的燃烧热值的测试方法05。
The feasibility of oxygen-enriched combustion in diesel engines was analysed in theory from aspects of heat release rate of fuels and combustion products.
通过对燃料燃烧的放热效率及燃烧生成物进行分析，进而对柴油发动机富氧燃烧的可行性进行理论分析。
The heat release rate of TBD620V12 diesel engine is analyzed by the method of combustion analysis.
利用燃烧分析方法，对TBD620 V 12柴油机的缸内压力曲线进行了放热规律分析。
The use of volatile technology, made of ceramic glow plugs heat the fuel evaporated into gas, fast ignition, combustion.
采用挥发技术，由陶瓷点火塞将燃油加热蒸发成气态，快速点火，燃烧充分。
By comparison with normal aluminum, the combustion heat and the available aluminum contents of different nano-aluminum powders were investigated.
采用与常规铝粉相比较的方法，考察了不同类型纳米铝粉的活性铝含量与燃烧热值。
It aims to offer some gists for transfering of heat and mass in the combustion of Masson Pine wood and some ideas for wood fire retarding.
本研究可为揭示马尾松木材燃烧过程中的热质迁移规律提供依据，也为木材阻燃机理的研究提供新的思路。
The influence of coke combustion temperature and oxygen flow on the coke combustion of waste heat boiler of ethylene device is studied in the coke combustion reactor that is designed by us.
在自行设计的废热锅炉焦炭燃烧试验装置中，考察了烧焦温度、氧气流量两主要因素对乙烯装置废热锅炉烧焦过程的影响。
In this paper, a practical technique to measure heat of combustion is given by way of applying high sensitive bridge temperature sensor linked microcomputer and automatic data acquisition system.
本文给出通过高灵敏度桥式温度传感器与微机联机，采用自动数据采集技术测定燃烧热的方法与实用技术。
It lays a foundation for modeling of flowing and combustion as well as heat transfer and abrasion of oil shale circulating fluidized bed boiler dilute zone.
同时为进一步建立适合油页岩的循环流化床燃烧室稀相区的流动、燃烧、传热、磨损模型奠定了基础。
By analysis, optimum matching of combustion system of swirl chamber engine is believed to be capable of improving heat release rate and fuel economy.
通过分析，认为对涡流室柴油机燃烧系统进行优化匹配，可改善放热规律，从而提高经济性。
The heat transfer experimental characteristics of immersed pipe is very useful to control combustion and heat transfer.
试验表明内旋流流化床内的埋管传热特性更有利于控制燃烧和传热。
Some hot state test data of quasi isothermal combustion with adjustable heat insulation boards are presented as well.
并给出了基于可调隔热板的准恒温燃烧的热态试验部分结果。
The extreme heat had caused the combustion of the car engine, which started the fire.
高温引起了车内发动机自行开始燃烧，开始了这场火灾。
The results calculated show that the predicted values of heat of combustion and heat of formation agree satisfactorily with the experimental values.
计算结果表明，脂肪酮燃烧热和生成热计算值与实验值的一致性令人满意。
Combustion and heat transfer character are the technical basis of combustion in circuiting fluid bed boilers.
燃烧和传热特性是循环流化床锅炉的燃烧技术基础。
And a reasonable mathematic model about the spray, evaporation, combustion and heat transfer of the propellant in engine is given.
给出了推力室内从推进剂雾化、蒸发、燃烧到传热一整套合理的数学模型。
The processes of fluid flow in the tube, combustion, heat transfer between the flue gas and tube were simulated without any simplification of the complicated geometry.
计算得到了炉内流场、 温度场及炉管表面热流密度分布的详细信息，揭示了焦化炉炉膛内流动、燃烧和传热过程的特性。
The new heat pipe type heating furnace with high efficiency based on heat pipe principle is consisted of the combustion chamber, evaporator and heat exchanger.
基于热管原理将燃烧室、蒸发器和换热器集于一体，构成了新型高效热管式加热炉。
The new heat pipe type heating furnace with high efficiency based on heat pipe principle is consisted of the combustion chamber, evaporator and heat exchanger.
基于热管原理将燃烧室、蒸发器和换热器集于一体，构成了新型高效热管式加热炉。
应用推荐