With the modified particle heat transfer model, the heat and mass transfer model of the indirect dryer is set up.
论述了应用基于移动加热板的颗粒热传递模型计算大型旋转管排式干燥机传热系数的方法。
Moreover, a multi component heat and mass transfer model for CFT was developed, and it was the base of CFT further studying.
并探讨了分凝分馏塔(CFT)的多组分传热传质模型，为进一步研究分凝分馏塔打下初步基础。
There is almost no one doing about developing heat and mass transfer model during wood high temperature drying in our country.
特别是我国在建立高温干燥过程中的热质迁移的模型方面，几乎还无人涉及。
A heat and mass transfer model was set up, and the simulation results were found to be in accordance with the experimental data.
建立了过程的热质传递模型，比较模拟数据与实验数据，验证了理论模型有较好的适用性。
A power profile is then determined as a function of the heat and mass transfer model for a given pull rate profile and model diameter profile.
然后确定作为给定提拉速率分布和模型直径分布的热和质量传送模型的函数的功率分布。
A heat and mass transfer model across the external boundary layer of polymer particles in emulsion phase with condensed mode operation was derived.
通过建立气相法聚乙烯冷凝模式操作流化床乳化相中粒子外边界层的热质传递模型，研究了冷凝模式操作时聚合粒子的过热情况。
By analyzing the physical characteristics and the operation condition of biomass pyrolysis, the biomass pyrolysis is described using kinetic model and heat and mass transfer model.
通过分析生物质热解的物理特性和运行条件，采用动力学模型和传热、传质模型，对生物质热解进行描述。
The mass transfer equation was introduced into heat transfer model of falling film evaporation. The radial velocity, mass diffusion coefficient and variation of film thickness were taken into account.
将传质方程引入到垂直管降膜蒸发传热模型中，求解时考虑了径向速度、质量扩散系数和膜厚变化对传热的影响。
Based on the study of the characteristics of heat and mass transfer of absorption, a numerical model to simulate the process of absorption of LiBr solution is established.
通过对溴化锂溶液在降膜吸收过程中传热、传质特性的分析，建立了垂直降膜吸收过程的数学模型。
A mathematical model was developed to investigate mass flow rates in the heat transfer pipes of the air side heat exchanger with and without distribution pipes for an air source heat pump.
建立分液管和换热器的数学模型，对空气源热泵风侧换热器在有、无分液管的情况下的各盘管中质量流量分配问题分别进行研究。
A mathematic model based on heat and mass transfer in porous media was established for the simulation of paper drying in dryer section of paper machine.
根据多孔介质干燥过程中的传热传质理论，结合纸机工作特点，建立了纸页的干燥过程物理模型和数学模型。
A planar model of air and water flow on metal fill surface was set up to investigate heat and mass transfer performance of air conditioner.
建立了填料塔的二维传热传质模型，考虑了因水蒸发或凝结而引起的水的质量变化和空气的质量变化。
The models included empirical model, models based on heat transfer analogy and models based on differential mass balance.
这些动力学模型包括经验模型，基于热传递类推的模型以及基于微分质量平衡的模型。
In the paper, dynamic analysis of temperature field in mass concrete has been worked out and mathematical model has been drawn up from the heat transfer.
从传热学角度对高性能大体积混凝土内温度场进行动态分析，并建立了符合实际的数学模型。
Then a stable heat and mass transfer mathematical model was developed and numerical simulation was conducted by using calcium chloride as the desiccant.
然后建立了其稳态传热传质过程的简化数学模型，对采用氯化钙溶液的再生过程进行了实例计算。
An internally cooled liquid desiccant dehumidifier was proposed and a steady state mathematical model describing the heat and mass transfer of the dehumidification process was developed.
提出了一种内冷型液体除湿器，并对该除湿器的除湿过程建立了热质交换的稳态数学模型。
Based on the analysis of heat and mass transfer, a simplified mathematical model describing the falling film crystallization process is developed.
本文在对降膜结晶分离过程进行传热传质分析的基础上，建立了简化数学模型。
The model includes the fluid flow, heat and mass transfer equations.
模型中包括了流动、传热和传质方程。
The model and results are helpful to reveal heat and mass transfer characters of the adsorbent bed and to provide theoretical basis for optimal design of this system.
该数学模型和计算结果有助于深入认识吸附床的传热传质特性，以期能为吸附床的具体设计提供理论依据。
The minimum liquid—vapor ratio and the Height of Mass Transfer Unit "HTU" can be obtained in lack of interphase heat transfer coefficient by the model.
利用该模型可以在缺乏相间传热系数的情况下，计算出最小液-汽比及传质单元高度HTU。
The mass transfer force concept was used to develop a model for the heat and mass transfer from a single superheated bubble rising in the water pool.
该文从传质推动力角度出发建立了高温气泡在水中上升过程的传热传质模型，计算结果与文献报道的实验数据、模拟结果基本吻合。
A new mathematic model based on analysis of liquid flow, mass transfer and heat transfer is proposed to describe wiped film molecular distillation.
在对刮膜式蒸馏器蒸发表面流体流动和传质传热进行分析的基础上，研究了分子蒸馏过程，并建立了数学模型。
The research progress of liquid dehumidification air conditioning system, desiccant and mathematic model for heat and mass transfer in dehumidification system at home and abroad is expounded.
对液体除湿空调系统、除湿剂、除湿系统中热质交换数学模型的国内外研究进展进行了阐述。
The influence of the working pressure on the heat and mass transfer was analyzed by this model, and the detailed process was investigated.
应用该数学模型分析了压力变化对加填料饱和器传热传质的影响，同时讨论了沿加填料饱和器高度方向的传热传质过程。
As primary research of hydrate formation using water spray, the kinetic model of hydrate formation of a water droplet was suggested by analyzing the heat and mass transfer mechanism.
作为喷雾强化方式制备气体水合物的初步研究，本文通过研究静止水滴形成气体水合物过程的传热传质机理，建立气体水合物的生成动力学模型。
A nonequilibrium nonlinear dynamic model of petroleum fractionators is developed in this paper by directly taking into account the mass and heat transfer between liquid and vapor in the tower.
建立了基于工艺机理分析的石油分馏塔非平衡动态数学模型，直接考虑汽液两相间的传质传热。
Based on the fact, a simplified drying model of heat and mass transfer is deduced from volume average theory.
对多孔介质体积平均理论进行简化，得到简化的热质传递干燥模型，用一个理论式表达模型中有效扩散系数。
A mathematical model is established to describe the complicated heat and mass transfer in these two components.
给出了统一的数学模型，对除湿器和冷却器内复杂的传热传质过程进行描述。
Paper introduces a mathematical model for heat and mass transfer of a rotary regenerative heat exchanger as well as the calculation method of temperature field.
本文介绍了一种再生式换热器的传热传质数学模型和温度场的计算方法。这种换热器具有两段以不同材料做传热元件的转子。
A mathematical model for the heat and mass transfer in the pyrolysis process of the biomass fuel bed was developed in this paper. Heat and mass transfer characteristics of the process were discussed.
通过分析生物质热解过程的传热传质特点，建立了生物质燃料层热解过程的传热传质数学模型。
应用推荐