Impact heat distortion temperature and low; temperature impact strength.
提高热变型温度和代温冲击强度。
It exhibits high strength, rigidity, and good heat distortion temperature.
它具有高强度，刚度和良好的热变形温度。
Improved heat distortion temperature and low temperature impact strength.
提高热变型温度和低温冲击强度。
Raise heat distortion temperature and Raise anti-impact strength from low temperature.
提高热变型温度和低温度冲击强度；
This will avoid vibration, heat distortion, crawl space and the impact on the accuracy of the workpiece being processed.
这样可以避免振动、热变形、爬行和间隙影响被加工工件的精度。
It combines flame retardant ability with an excellent balance of high strength, stiffness and heat distortion temperature.
它结合了火焰高强度优良的平衡，刚度和热变形温度阻燃能力。
The resin toughness is good, the casting body heat distortion temperatures are high, is a complex entanglement with a good performance resin.
该树脂韧性好，其浇铸体的热变形温度高，是一种综合性能良好的缠绕用树脂。
Commercially available grades offer different characteristics such as medium to high impact, low to high surface gloss, and high heat distortion.
这些不同品质的材料提供了不同的特性，例如从中等到高等的抗冲击性，从低到高的光洁度和高温扭曲特性等。
Its unique crystalline structure results in increased strength, stiffness, heat distortion temperature and performance under load as a homopolymer.
其独特的，增加了强度，刚度晶体结构的结果，热变形温度和负荷下表现为均聚物。
The cured system of epoxy resinlead benzoylate has high heat distortion temperature, but its dielectric properties at high temperature and heat ageing life deteriorate.
环氧-羧酸盐体系虽然热变形温度和热态强度较高，但高温下介电性能差，耐热老化性能也不好。
SiO2-JX could replace short glass fiber in the modification of PA6, improving the heat distortion temperature, removing the appearance of glass fiber, reducing shrinkage and the cost.
晶须矽可取代短玻纤使用，提高热变形温度、消除玻纤外露，降低收缩率及生产成本等。
The results showed that the tensile strength, thermal-oxidative stability, flame retardancy and heat distortion temperature of the composites are enhanced with increasing MHSH contents.
实验结果表明，复合材料的拉伸强度、热氧化稳定性、阻燃性能和热变形温度随着MHSH含量的增加而显著提高。
The company specializes in developing high temperature PPS material, the heat distortion temperature greater than 260 degrees, is a comprehensive performance of special engineering plastics.
本公司专业生产研发耐高温pps材料，其热变形温度大于260度，是一种综合性能优异的特种工程塑料。
As the chlorine content of the product increased, the heat distortion temperature increased significantly, its targets have been increased mechanical strength, its wide range of applications.
该产品随着氯含量的提高，其热变形温度明显上升，其机械强度指标也相应提高，其应用范围十分广泛。
The company said it had received 39 problem reports, including 26 in the United States, of users complaining about the heat and distortion of the shape of their computers.
索尼公司称收到了39例问题报告，包括来自美国的26例，用户抱怨他们的电脑过热以及产生变形。
Now it is possible to see with superior quality without the intense heat, excessive glare and harsh distortion of standard lighting.
现在是尽可能地看到，与优质没有激烈的热量，过多的眩光和苛刻的失真的标准照明。
In this paper, the effect factors on heat treatment distortion, such as material, forging and preheat treatment etc. have been studied.
本文对影响齿轮热处理畸变的材料、锻造、预备热处理等因素进行了研究。
Being aimed at distortion of side plate for welding case of electronic equipment, this paper puts forward a new method to straighten distortion by using resistance heat which produced by spot welding.
本文针对焊接机柜加工中产生的侧板波浪变形，提出了一种运用点焊产生的电阻热来矫正变形的新方法。
Another reason I chose to use the adjustable rod-end bearings was to compensate for the frame distortion caused by heat treating process of the aluminum frame.
另一个原因，我选择使用可调节杆端轴承是为了弥补铝帧帧处理过程热变形引起的轴承。
The large heat loading in converter leads to the easily distortion of oxygen hole in lance tip, which has influence on the efficiency of steel-making and the life-span of oxygen lance tip.
转炉氧枪喷头热负荷大，导致喷孔容易变形，进而影响炼钢效率和喷头寿命。
The factors that influence the distortion of carburizing and hardening gears were listed and several measures to reduce heat treatment distortion were proposed.
根据硬齿面齿轮生产现状，分析了影响渗碳淬火齿轮畸变的因素，并提出了减小畸变的措施。
Resistance welding method has great destroy to the magnetic property of the seam, which will cause image distortion of the display when swerving, and post heat treatments are needed.
由电阻焊接方法焊接的超低碳钢支架对磁性破坏较大，导致显示器再转向后出现图像滞后和色偏等失真现象，需要进行焊后热处理。
A thermal elastoplastic asperity contact model is investigated, which takes into account the steady-state heat transfer and the asperity distortion due to thermal elastoplastic deformations.
考虑恒定的热传递和热弹塑性变形引起的粗糙峰变形，对多层介质粗糙表面热弹塑性接触模型进行分析。
The gear distortion of automobile rear bridge during carburizing heat treatment was discussed, the fault reason was analysed and relevant measure was put forward.
主要探讨了汽车后桥被动锥齿轮在渗碳热处理过程中出现的变形问题，并分析了缺陷产生的原因，提出相应的解决对策。
Effectiveness of reducing welding distortion by trailing intensive cooling and the influence of heat - dissipating condition of the fixture on such effectiveness were studied.
研究了随焊激冷减小铝合金薄板焊接变形的效果及夹具的散热条件对该效果的影响。
The present paper analyzed the reasons of heat treatment distortion of carburizing and hardening components and the formation process of the internal stress.
介绍了渗碳淬火零件热处理畸变的原因，分析了热处理内应力的形成过程。
The paper is to explain why work piece will cause distortion in quenching treatment, to analyze six most factors of work piece distortion caused in heat treatment.
本文阐述了在淬火处理中工件变形原因，分析了工件在热处理过程中引起变形的六个主要因素。
Small heat influence area, low distortion, beautiful welding gap.
热影响区小、变形小、焊缝成形美观。
The experiment results show that proper heat treatment time can decrease the crystal lattice distortion of the alloy.
结果表明，合理的热处理时间可以使该合金粉畸变的晶格得到恢复。
The experiment results show that proper heat treatment time can decrease the crystal lattice distortion of the alloy.
结果表明，合理的热处理时间可以使该合金粉畸变的晶格得到恢复。
应用推荐