According to the above theory, a new heat transfer calculation method suitable for central reverse flame oil(gas)-fired boiler was brought forward and verified b…
提出了适合中心回燃式锅炉燃烧室传热的计算方法，并通过实验加以验证。
Some problems of heat transfer are studied in this paper, they are dew point, boiling point, density, equilibrium constant, thermophysical properties and heat transfer calculation method.
本文对涉及露点、泡点、密度、平衡常数、热物性参数以及传热计算等问题进行了探讨。
Based on analysis of heat transfer in the process of liquid evaporation in details, an evaporation model was developed and the calculation method was also provided.
在对液体蒸发过程中的热量传递进行详细分析的基础上，推导建立了液体蒸发计算模型，并给出了求解方法。
Presents the transmission matrix of heat transfer of multilayered spherical walls and introduces the calculation procedure of frequency-domain regression (FDR) method.
给出了多层球形墙体的热传递矩阵，提出了用频域回归(FDR)方法计算球形墙体瞬时传热的方法。
This paper describes using the Runge-Kutta method to carry on numerical calculation about mixed convection heat transfer, and analyses the result combining with the process of food freezing.
用龙格一库塔法进行了混合对流换热的数值求解，结合食品冷冻分析了数值计算结果，探讨了食品冷冻中冷风的合理流向。
This thesis studied the heat transfer process of agitated vessels systemically and analysis the calculation method of heat transfer in agitated vessels.
本文系统地研究了搅拌设备的传热过程，分别对搅拌设备常用的传热构件-夹套和内冷管-的传热计算的方法流程进行了分析研究。
A power calculation method of the heat transfer oil stove is summarized by calculation.
文章通过实际计算，总结了导热油炉功率计算的一种方法。
A calculation method is presented for heat transfer and flow resistance of a spiral plate heat exchanger for the gas-liquid.
提出了螺旋板式换热器用于气-液热交换时的流动阻力以及传热设计的计算方法。
The method of regUlating heat transfer process and auxiliary calculation were introduced sccording to work POint concept.
介绍了利用工作点的概念，进行传热过程调节及辅助计算的方法。
A numerical calculation of enhanced heat transfer efficiency of LFT is finished in this paper by the boundary element method.
本文运用边界单元法对低肋管的强化传热效能进行了数值计算。
A calculation model of the coefficient of heat transfer between gas and stave body and inlaid refractory is built based on the substitution method of boundary condition.
基于边界条件替换方法建立了高炉冷却壁本体和捣打料与炉气之间的换热系数计算模型。
This paper presents a brief introduction of discrete transfer method (DTM) and the result compared with other methods in the calculation of radiation heat transfer.
本文全面地介绍了离散传播法的原理、计算过程，并通过计算实例对此方法与其它辐射工程计算方法进行了对比研究。
The calculation method of some important parameters, such as the heat transfer coefficient, dead time and so on of the closed steam tube rotary dryers was proposed.
提出了密闭型蒸气管回转干燥机传热系数及停留时间等主要工艺参数的计算方法。
In accordance with the intermittent furnace of applying high-speed burners, this paper puts forward a calculation method of radiation heat transfer within furnace under a strong convection system.
本文针对间歇式炉使用高速燃烧器，提出了强对流体系下炉内辐射传热计算方法。
On the basis of theoretical analysis, this paper gives a new calculation method of the heat transfer of thermal bridge.
本文在热桥传热理论分析的基础上，提出了一种新的热场畸变法。
The paper presents an introduction to a numerical calculation method of the steam flow field and heat transfer performance ot condensers, accompanied by the analysis of a calculated example.
介绍凝汽器汽相流场与传热特性的数值计算方法及算例分析。
Paper introduces a mathematical model for heat and mass transfer of a rotary regenerative heat exchanger as well as the calculation method of temperature field.
本文介绍了一种再生式换热器的传热传质数学模型和温度场的计算方法。这种换热器具有两段以不同材料做传热元件的转子。
This paper proposes an inverse heat conduction method model used in computer measurement and calculation to derive the heat transfer coefficient of quenchants during the quenching process.
提出了用计算机进行测量和计算淬火过程中淬火介质换热系数的反传热模型。
A power calculation method of the heat transfer oil stove is summarized by calculation.
提出了联机活套的传动方式和功率计算方法。
The calculating method of two great region simplifies amount of furnace heat transfer calculation and provides smoke temperature directly on calculating section in calculation of scr…
直接给出屏式过热器壁温计算入口断面烟气温度参数；
In this article, we adopt SIMPLER method, take styrene-polystyrene as an example and make a simulating calculation of heat transfer of a high viscosity pseudo - plastic fluid in the tube.
文中采用S IMPL ER方法，以苯乙烯-聚苯乙烯物系为例，对高粘假塑性流体管内传热进行了仿真计算。
The method can evaluate the temperature-dependent heat transfer coefficient with the coupling calculation of temperature and latent heat according to the temperature curve …
在计算过程中，通过有限元法得到工件内部相应位置在相应时间段所产生相变潜热，并将各单元的相变潜热与单元温度场进行耦合计算。
The method can evaluate the temperature-dependent heat transfer coefficient with the coupling calculation of temperature and latent heat according to the temperature curve …
在计算过程中，通过有限元法得到工件内部相应位置在相应时间段所产生相变潜热，并将各单元的相变潜热与单元温度场进行耦合计算。
应用推荐