The perimeter averaged heat transfer coefficients depend on heat flux, mass flow rate, quality and saturated pressure.
截面平均换热系数则与质量流速、热流密度、质量干度和蒸发压力密切相关。
Through a test research for heat pipe radiators of steel column type, we get the relative formula of heat transfer rate, calculating temperature difference and flow rate of the heat medium.
通过对钢制柱型热管散热器的试验研究，得出了散热器热流量和计算温差、热媒流量的关系式，并提出了进行热工性能试验的方法及进一步研究的意见。
Effects of the liquid property, flow rate, material and surface characteristic, temperature and boiling on the fouling of heat transfer equipment are analyzed.
分析了换热设备结垢的主要影响因素：流体性质、流体流速、材质及表面状况、温度和沸腾等。
The result shows that the preferable heat transfer effect can be acquired on the condition of a low flow rate.
研究结果表明流体绕流振动圆管时，在较低流速下即可获得较好的传热效果。
The oil flow rate distribution curve mainly has an "S" shape, and the heat transfer rate shows a "bathtub" distribution.
油冷器各层芯片流量分配曲线大致呈S形分布，而换热量分配曲线呈浴盆状分布。
Experiment measure static pressure, pressure loss coefficient, flow rate of lateral and heat transfer coefficient of endwall at different re and different lateral-flow ratio (c).
实验中对不同雷诺数、不同出流比时通道端壁表面的静压分布、压力损失系数、弦向流量分配以及换热系数进行了测量。
A mathematical model for heat transfer process in HPH furnace was established and verified, then applied to analysis of the relationship between gas flow rate and annealing time.
通过建立全氢罩式退火炉炉内传热过程的数学模型，并经过实测验证后，分析了循环风量与退火时间的关系。
The effect of mass flow rate on convection heat transfer is complicated.
流量对对流换热的影响比较复杂。
The equilibrium water content of the solids for drying, the number of mass transfer units for gas absorption and mass flow rate for heat transfer system were obtained using MATLAB.
用MATLAB计算食品过程中的物料平衡含水量、气体吸收的传质单元数和传热过程的调节，研究基于MATLAB的非线性方程、非线性方程组的求解和数值积分功能的应用。
In this article, the main influencing factors on condensation heat transfer include air flow rate, coolant flow rate, coolant inlet temperature and mixed gas velocity.
在本课题中，影响传热过程的因素主要有空气含量、冷却水流量、冷却水温度及混合气气速。
The effects of liquid flow rate, carrying gas flow rate, heat flux and liquid properties on heat transfer coefficient were measured.
研究了液体流量、载气流量、壁面热负荷及料液物性等对降膜载气蒸发传热的影响。
A two-phase flow patterns, the relationship between the heat transfer coefficients and heat flux and the relationship between the recirculation flow rate and heat flux are investigated.
探索了该装置内的两相流流型及传热系数、循环速率与热通量的关系。
A mathematic model for the relationship between the rate of heat transfer per meter borehole and the depth of borehole as well as the flow rate was built.
建立了钻井单位井深换热量与钻井深度、流量变化关系的计算模型。
The utility model has the advantages of air flow area and air flow rate increasing, uniform water distributing and heat transfer and mass transfer effect promoting.
本实用新型可增加空气的流通面积和空气流量，均匀配水，提高传热传质效果。
Low air flow rate will increase the rise of temperature, but total heat transfer will be reduced.
降低空气速度可以提高空气的温升幅度，但是总的吸热量将会降低。
The results indicate that increasing the refrigerant flow rate can enhance the coefficient of heat transfer of the evaporator.
实验表明，以增大制冷剂流速来强化换热，可以提高蒸发器的传热系数；
The results indicate that increasing the refrigerant flow rate can enhance the coefficient of heat transfer of the evaporator.
实验表明，以增大制冷剂流速来强化换热，可以提高蒸发器的传热系数；
应用推荐