The effect of alloying high manganese steel on microstructure has been studied.
研究了高锰钢合金化对组织的影响。
Wear resistance high manganese steel 11-14%, for the excavator bucket, ball mill liner.
含锰11- 14%的钢有极高的耐磨性,用于挖土机铲斗,球磨机衬板等。
The directions of development of high manganese steel strip production in China are proposed.
从成分体系开发、制造技术等角度浅析了国内高锰板带钢的研发方向。
Also practical application indicates that it can survive two times longer than the high manganese steel.
现场应用表明:其使用寿命是高锰钢的两倍以上。
The results show that it can be used in carbon steel, high manganese steel, iron or cuprum alloys castings.
生产性试验表明,该涂料用于生产碳钢、高锰钢、铸铁及铜合金铸件均可获得令人满意的结果。
And if the purple red: nonmagnetic as high manganese steel, magnetic usually usually steel or low-alloy steel.
而假如变紫红色:无磁性的为高锰钢,有磁性的通常为通常钢或低合金钢。
The results show that WC particles uniformly distributed in the composite and well combined with the high manganese steel.
结果表明制备的复合材料颗粒分布均匀,WC颗粒与高锰钢基体结合良好;
It is very difficult to welding a high carbon steel rail and a high manganese steel frog, which is still a worldwide puzzle.
碳钢钢轨与高锰钢辙叉的焊接难度很大,仍属国际性难题。
Features: Adopt suspension casting technique, including standard high manganese steel and multiple alloying high manganese steel.
特点:采用悬浮铸造技术,包括标准高锰钢和多元合金化高锰钢。
The high manganese steel was processed by the conventional shot peening technology, and the surface microstructure was characterized.
利用传统的喷丸技术对高锰钢表面喷丸处理,研究材料表层的组织结构特征。
The results show that the resistance of low carbon high alloy steel is better than that of the high manganese steel under the same test condition.
结果表明,在相同试验条件下低碳高合金钢的冲击腐蚀磨损性能要优于高锰钢的。
The field tests indicated the service life of this alloy steel hammer is higher than high manganese steel, especially the cast can be raised to 60%.
装机试验表明,该材质锤头使用寿命比高锰钢高,特别是铸态中锰钢锤头寿命可提高60%。
The study of damage of low temperature brittleness on high manganese steel has been carried out by theoretical analysis and a series of impact tests.
通过理论分析和系列冲击试验,对高锰钢出现的低温脆性损坏进行了分析研究。
Large scale high manganese steel alligator board produced by EPC process can meet the request of design, and use with hot remained water toughening treatment.
消失模铸造生产大型高锰钢颚板,并按设计的工艺要求进行生产,利用余热水韧处理。
Solidification microstructures in heavy section high manganese steel casting were simulated using coupling cellular automaton(CA)and finite element method(FEM).
采用元胞自动机与有限元相耦合的方法模拟厚断面高锰钢铸件凝固组织。
Effect of polarization potential on the corrosion-wear behavior of high manganese steel in ore slurry was investigated by a self-made impact corrosive-wear tester.
通过自制的冲击腐蚀磨损试验机,施加不同极化电位对高锰钢在矿浆介质中的冲击腐蚀磨损行为进行了试验研究。
It was found by industrial experiments that the wear resistance of the crusher hammers is about 4 times higher than that of the high manganese steel crusher hammers.
工业实验表明,复合变质处理高铬铸铁锤头的耐磨性约是高锰钢锤头的4倍。
Our products: Various gray iron, ductile iron, common cast steel, low-alloy steel, high manganese steel, etc various parts of architectural and mechanical engineering.
本公司主要生产各种灰铁件、球铁件、铸钢件、高猛钢件等各种建筑、工程机械用零部件。
Broken such materials, plate hammer or hammerheads for high manganese steel can, so have the equipment jaw crusher, like bluestone, limestone hardness small and crisp.
破碎这样的物料,板锤或是锤头为高锰钢即可,这样的设备有颚式破碎机,而像青石、石灰石硬度小且脆。
As a kind of typical hard machining materials, owing to its abrasion resistance and low cost, high manganese steel is widely used for those components that bear great impacts.
高锰钢是一种典型的难加工材料,因其优良的耐磨性和低廉的价格,被广泛用于制作受冲击较大的零部件。
The microstructure and properties of high manganese steel under the conditions of different rolling load were analyzed and studied through the om, TEM and HD-187.5 sclerometer.
利用光学显微镜、透射电子显微镜和HD- 187.5型硬度计对高锰钢在不同轧制应力条件下的组织和性能进行了分析和研究。
The GB stipulates that high manganese steel should be dissolved by rare sulphuric acid, the silicon in the solution should be determined by the molybdenum blue photometric method.
针对用国标规定的稀硫酸溶解试样、钼蓝光度法测定高锰钢中的硅存在结果偏低的问题,试验验证了用硝酸溶样能保证测定结果的准确性。
By two double-mediate layer method, using developed welding materials and technology of forced arc molding, butt joining tests of high manganese steel with rail steel are completed.
采用两种过渡层方法,使用研制的过渡层焊接材料,结合强制成形电弧焊工艺进行了高锰钢辙叉与钢轨双过渡层对接焊试验。
Manganese elements in low alloy steel, electrician steel, high manganese steel and stainless steel were measured with sequential wavelength scanning X-ray fluorescence spectrometry.
应用波长扫描X射线荧光光谱法对中低合金钢、电工钢、高锰钢、不锈钢中锰元素进行测定。
Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel.
比较两种材料试样在一定时间内的失重变化情况,表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
Therefore use high manganese steel slag Raymond grinding milling roller and grinding ring material, to adapt to the steel slag grinding characteristics, has made a good technical effect.
因而钢渣雷蒙磨采用高锰钢磨辊和磨环材料,来适应钢渣的粉磨特性,已经取得良好的技术效果。
In order to solve the surface chemical scab phenomenon of the high manganese steel casting, the method that replacing quartz sand with magnesium olivine sand was put forward in this paper.
介绍了为解决高锰钢铸件的表面化学粘砂现象,结合生产实际,提出将铸件原砂由石英砂改为镁橄榄石砂。
High manganese steel are widely used for its excellent abrasion resistance. However it is difficult to avoid defects of decarburization, grain growth, cracking and deformation during heat treatment.
高锰钢的优良耐磨性能使其有广泛的应用范围,但在热处理过程中却难以保证所要求的显微组织,并容易引起脱碳、晶粒长大、裂纹和变形。
Under lower and medium impact energy, the abrasive wear resistant performance of the steel metioned is higher than that of low alloyed medium carbon wear resistant steel and high manganese cast steel.
结果表明,在中、低冲击磨料磨损条件下,试验钢的耐磨性优于中碳低合金耐磨钢和高锰钢。
Under lower and medium impact energy, the abrasive wear resistant performance of the steel metioned is higher than that of low alloyed medium carbon wear resistant steel and high manganese cast steel.
结果表明,在中、低冲击磨料磨损条件下,试验钢的耐磨性优于中碳低合金耐磨钢和高锰钢。
应用推荐