Graphite; High speed milling; Powder; Huff conditions;
石墨；高速铣削；粉屑；吹气条件；
Special ultra fine sub micron grade for high speed milling especially for mould making.
特别适合高速铣削的晶粒度为超细的牌号，特别适合模具制造。
As a result, high speed milling parameter can achieve better workpiece surface quality.
实验表明，高速铣削能够获得较好的工件表面质量。
Large diameter of milling knives, high speed milling, good quality milling profile surface.
刀具直径大，切割速度高，加工面质量好。
The stability and cutting forces in high speed milling process can be forecasted with the model.
利用该模型，可对铣削过程的特征参数如稳定性、切削力等进行预测。
The numerical control programming technique for high speed milling is a kind of comprehensive technique.
高速铣削数控编程技术是一项综合性的技术。
The influences of cutting speed on milling forces are presented on the basis of the high speed milling experiments.
在高速铣削试验的基础上，研究高速切削时切削速度对切削力的影响。
The effective factors of milling force and the machined surface roughness are focused on when high speed milling TC4.
选择了钛合金tc4进行高速铣削试验，重点研究了高速铣削tc 4钛合金铣削力的影响因素及已加工表面粗糙度。
Abstract: Regenerative chatter is a major factor restricting the process efficiency and quality of high speed milling.
摘要：再生型颤振是制约高速铣削加工效率和零件加工质量的主要因素。
The results show that the system of high speed milling parameters optimization based on genetic algorithms is practicability.
结果表明，基于遗传算法的高速铣削参数优化系统的具有较强的实用性。
Therefore, the tool wear monitoring had important practical significance for high speed milling machining technology application.
因此，刀具磨损的监测对高速铣削加工技术的推广应用有重要的实际意义。
The fractal dimension of high speed milling aluminum alloy surface micro-topography is calculated by the structure function method.
采用结构函数法计算出高速铝合金铣削表面微观形貌的分维数。
Not only high speed milling quench steel ensures quality of manufactured surface, but only it can obtain high production efficiency.
淬硬钢高速铣削加工既可以保证加工表面的质量，又可以获得较高的生产效率。
The machines have four types of functional heads: vibration cutting head, creasing wheels, V-cutter, high speed milling Router, with drawing pen.
机器有四个功能头：振动刀切割头、压折线轮、V型切割头和高转速铣刀头。
The development of high speed milling cutter and parametric design system provide firm base for the further research of high speed cutter product.
高速面铣刀及其参数化设计系统的研制，为进一步开展高速刀具产品化的研究奠定了坚实的基础。
The paper introduced on the characteristic and the method of numerical control programming technique for high speed milling and application field.
本文介绍了高速切削的特点、程序编制的方法及应用领域，同时对高速切削技术的应用提出一些建议。
A very serious accident could result from the large centrifugal force of the high speed milling tools. The theoretical model of milling force is established.
高速铣刀在加工过程中的主要载荷离心力过大可导致刀体破碎而造成重大事故。
Choice of cutting tool, cooling manner and feed path in high speed milling S-136 hardened stainless tool steel were analyzed, based on a S-136 die production.
结合生产，对s- 136淬硬钢高速铣削工艺的刀具选择、冷却方式、进给路线进行了分析。
Some tool-path optimization algorithms are put forward for High Speed Milling (HSM) aiming at the characters and requests from NC automatic programming of HSM.
针对高速铣削的特点和编程要求，提出了适合高速铣削的粗精加工刀轨优化算法。
The wearing intensitivity of the high speed milling tools can be measured indirectly by means of measuring the thermo -voltage between the tools and the workpiece.
铣刀刀刃的磨损量可以通过铣刀与工具之间的温差电压间接地进行测量。
High speed milling of hardened mould steel can not only ensure the quality of the surface that has been processed, but also achieve a high efficiency of production.
模具淬硬钢高速铣削加工既可以保证加工表面的质量，又可以获得较高的生产效率。
The use of cryogenic nitrogen gas jet to reduce the temperature of cutting zone and to avoid oxidation wear of tool in high speed milling titanium alloy was presented.
为降低切削区温度、防止刀具的氧化磨损，提出在低温氮气射流条件下进行钛合金的高速铣削加工。
Therefore research on surface temperature and its field distribution of Ti alloy in the condition of high speed milling is very useful and has a prospect of application.
因此，研究钛合金高速铣削表面温度及温度场分布具有重要的实用价值和应用前景。
Research work on the safety technology for high speed milling tools in Germany is introduced. The measures for increasing safety of high speed milling tools are presented.
本文介绍了德国对高速铣刀安全性技术研究的基本内容，提出了提高高速铣刀安全性的措施。
The process characters and applications of high speed milling is Introduced, and the strategy of its application for rough, semi-finish, finish cutting is discussed in this paper.
介绍高速铣削技术的工艺特点及其应用，并就高速铣削的粗加工、半精加工和精加工策略进行探讨。
The process characteristics and applications of high speed milling is introduced, and the strategy of its application for rough, semi-finish and finish cutting is discussed in this paper.
介绍了高速铣削技术的工艺特点及其应用，并就高速铣削的粗加工、半精加工和精加工策略进行了探讨。
The process characteristics and applications of high speed milling is introduced, and the strategy of its application for rough, semi-finish and finish cutting is discussed in this paper.
介绍了高速铣削技术的工艺特点及其应用，并就高速铣削的粗加工、半精加工和精加工策略进行了探讨。
应用推荐