Governor oil pumping unit and hydraulic accumulator shall be tested and correct functioning of the system will be verified.
油泵调速器和液压蓄能器应经过测试并证明可以是系统正常运作。
Energy loss of hydraulic accumulator during energy storage and reuse was analyzed using Runge-Kutta method according to its mathematical model.
根据建立的液压蓄能器数学模型，采用龙格-库塔数值方法对液压蓄能器在存储和释放能量过程中的能量损失进行了分析。
The result proves that it is possible to make full use of hydraulic accumulator of rapid simultaneous closing and to reduce the overall dimensions of the device.
同时，论证了充分利用压机大型快速闭合蓄能器和缩小装置外廓尺寸的可能性。
The system uses the engine to drive a hydraulic pump that charges an accumulator to high pressure.
这种系统利用该发动机来驱动液压泵以使蓄压器充满压力达到高压。
The accumulator delivers that pressure to a hydraulic motor that turns the wheels.
这个蓄压器将那个压力传送给液压发动机而转动车轮。
Accumulator charging valve is key unit used in hydraulic braking system of engineering machinery and rubber tyred equipments for mines.
蓄能器充液阀是一种用于工程机械及矿山无轨设备制动液压系统的关键液压元件。
In the hydraulic system USES the accumulator, may the absorption line shock maximum limit, reduce to the variation of load to the adhesive tape the impact, enhances adhesive tape's service life.
液压系统中采用蓄能器，可以最大限度的吸收液压冲击，减小对负载变化对胶带的冲击，提高胶带的使用寿命。
The automatic accumulator system can automatically maintain the working pressure of the accumulator in specified range and is widely applied in the hydraulic system of truck cranes.
自动蓄能器系统能够使蓄能器工作压力自动保持在设定的范围内，在汽车起重机液压系统中获得广泛应用。
Taking account of the working characteristics of hydraulic hammers, an optimum DE - sign of the accumulator and composite seal constructions is conducted - to increase the hammers total efficiency.
对液压锤合理地设置了蓄能器与组合密封结构，提高了液压锤的总效率，并通过实验证实了该设计方法的合理性与有效性。
With an example, the theoretical principle for designing accumulator absorbing pressure fluctuation is presented by analyzing the dynamic characteristics of hydraulic system.
针对蓄能器的应用，通过实例，从分析液压系统动态特性的角度，阐明设计蓄能器吸收压力脉动时应遵循的理论依据。
A new hydraulic load simulation system, adopting a rotation directional valve and using a spring accumulator simulating the starter load, is proposed and working principles are described.
提出了一种采用旋转式换向阀及弹簧蓄能器模拟发动机负载的液压负载模拟系统，详细介绍了该系统的工作原理；
Depending on the fluid volume and precharge pressure of the accumulator, a limited amount of hydraulic energy is then available independent of any other power source.
根据储能器的流体体积和预充气压力，可获得某限定数量的液压能量而不依赖任何其它动力源。
The bladder accumulator is used in the hydraulic system for balancing the flow of the system, stabilizing the pressure of system or recovering the energy in the system.
皮囊式蓄能器在液压系统中用于均衡系统的流量，稳定系统的压力或回收系统的能量。
A single - direction valve controlled by liquid, an accumulator and hydraulic pumps can be used to keep pressure in hydraulic systems.
液压系统可以采用液控单向阀、蓄能器、液压泵等多种形式实现保压。
Allow approximately 10 minutes for the accumulator hydraulic pressure to become stabilized.
等待大概10分钟，使得储压器液压变得平稳。
High-pressure hydraulic clamping device use accumulator to hold pressure, to improve productivity and save energy.
高压锁模采用蓄能器直压保压，提高生产率，节省能源。
Accumulator is used in hydraulic press driven by pump-accumulator. The high pressure pump with small flow can put working liquid into the accumulator in the intermittent working time of press.
泵-蓄势器传动的液压机，由于采用了蓄势器，故只用流量较小的高压泵。
So hydraulic press driven by pump-accumulator can boost pressure more quickly than driven directly by pump, but the work is equal when the two types of presses make work pieces deformed.
因此，它比泵直接传动的压机升压快，但是在使工件产生变形时作的功都是相等的。
So hydraulic press driven by pump-accumulator can boost pressure more quickly than driven directly by pump, but the work is equal when the two types of presses make work pieces deformed.
因此，它比泵直接传动的压机升压快，但是在使工件产生变形时作的功都是相等的。
应用推荐