In the operation process of CNC machining center, the first is based on the design drawings and the technology of machining workpiece processing program, and then enter the CNC machining center.
在CNC加工中心运行过程中，其首先是根据工件设计图件和加工技术进行加工程序的编程，然后输入CNC加工中心中。
In this process, metal removal is achieved through combining the rotary motion of the milling cutter and linear motions of the workpiece simultaneously.
在此工艺中，金属去除是通过铣刀的旋转运动和工件的直线运动的组合实现的。
The grinding strengthen technology is a new process engineering of surface heat-treatment, which uses a mass of grind heat produced in grinding process to handle workpiece materials.
磨削强化技术是利用磨削加工过程中产生的大量磨削热对工件材料进行表面热处理的新工艺技术。
The system is intelligentized and automated in the process of workpiece rectification.
该系统实现了工件矫正过程的智能化及自动化。
We often fall across a problem of vertex recognition in the process of image measure, for example, to detect length of 2d image, area and some workpiece index.
图像检测中对2d图像的长度、面积测量，以及工件的某些指标的计算，常常会遇到顶点识别问题。
In the process of plane lapping with solid abrasive, the uniform abrasion of lapping tool is very important to ensure a good form of the workpiece and the lap-ping tool.
固着磨料平面研磨加工中磨具的均匀磨损对于保证磨具和工件的加工面形精度具有极为重要的意义。
In the process of bending, the excessive length of the straight flange of the bend mold and the workpiece with turnups cladding the lower mold support make a comparatively difficult unloading.
在工件折弯过程中，当工件直边长度尺寸较大且工件上带有翻边时，工件包覆在下模架上卸料比较困难。
In the process of EDM, dielectric medium has remarkable influence on material removal rate, surface quality of the workpiece and relative electrode wear ratio.
电火花加工中，放电介质对工件的材料去除率、表面质量以及电极相对损耗率有重要影响。
Processing of the workpiece in the process the situation before.
工件在本工序加工之前的情况。
This paper discusses the development of the high-speed cutting technology in respect to the machine tool, cutting tool, workpiece and process.
本文从机床、刀具、工件、工艺等方面讨论了高速切削的技术开发情况。
The cutting temperature play an important role in the high speed cutting process, concerning about the tool wear, workpiece surface integrity and machining precision.
切削温度与刀具磨损、工件加工表面完整性及加工精度密切相关。
There is a lot of random factors in CMG's manufacturing process, such as dimension and material properties of workpiece, its load is always random in the course of CMG's using.
在控制力矩陀螺的制造过程中会存在大量的随机性因素，如加工尺寸、材料属性等，而在它的使用过程中，外界载荷也具有随机性。
The coordinate value in NC machining process is related to predetermine position, size, geometry shape of the processing workpiece of the machining.
数控加工程序中的坐标值，关系着机床上加工工件的位置、尺寸和几何形状等，是数控加工程序中的重要内容。
Then the heat conducting and temperature variation of the standard shape workpiece in the cooling process are calculated.
其次计算了急冷过程中标准形状工件的热传递及温度变化的数学规律；
Grinding fluid in the grinding process plays an extremely important role in the proper use of grinding fluid can improve the process stability and improve workpiece quality, extend tool life.
磨削液在磨削加工中扮演着极为重要的角色，正确使用磨削液能提高工艺稳定性、提高工件质量、延长刀具使用寿命。
Almost any shape of the workpiece can be ground. In the grinding process, the system has powerful features for dressing and compensation with the grinding wheel.
几乎任何形状的工件均可研磨，在研磨过程中系统有超强砂轮修整功能，可在研磨中执行砂轮修整和补偿。
For a workpiece used in expanding the beginning of plastic pipe, We analyse the machining process, workpiece rectifying before machining, and design WEDM processing and its program.
针对扩口器工件的特点进行了线切割加工工艺分析、工件校正及编程设计；
The results show that reasonable process parameters are help for better surface integrity of machined workpiece and decrease wears in the tool.
研究结果表明，选取合理的工艺参数能提高工件表面精度和减少刀具的磨损。
In the heat treatment process, no collision between the workpiece and balanced by furnace heating, plus under the influence of controlled atmosphere to prevent air entering the furnace.
在热处理的过程中，工件相互间无碰撞，均衡的通过炉膛加热，加上可控气氛的作用下，阻止空气进入炉内。
Than the loose organization of the abrasive used is not easy passivation, less heat in the grinding process can reduce the workpiece deformation and heat burns.
较松组织的磨具使用时不易钝化，在磨削过程中发热少，能减少工件的发热变形和烧伤。
Cauchy stress, plastic strain and slipping-off distribution in the workpiece during drawing process are given.
模拟得出了变形过程中的应力应变状态和错动量分布。
In this paper the extrusion pressure between the stud and the workpiece during stepping arc stud welding process is acted as the controlled variable so as to control the stud plunge depth.
基于步进式电弧螺柱焊方法，以焊接过程中螺柱与工件之间挤压力为控制量，实现对螺柱送进深度的控制。
The workpiece to be plated and the clamping sealing device together form a container having an opening at the top; in plating process, the workpiece is the cathode, and the plating pen is the anode.
待镀工件与装夹密封装置一起组成了一个顶部开口的容器，在施镀过程中，工件为阴极，镀笔为阳极。
Machining process is a process generated shape, in this process, Drivers device on the workpiece material to be in the form of chip removal.
机械加工过程是一个产生形状的过程，在这过程中，驱动装臵使工件上的一些材料以切屑的形式被去除。
The design of milling process parameters and geometrical parameter of milling cutter is accomplished to obtain the minimum amplitude of relative vibratory displacement in cutter-workpiece system.
以刀具—工件系统的相对振动位移振幅最小为目标，完成铣削加工参数和铣刀几何参数的设计。
Virtually, ultrasonic vibration is added to tool electrode or workpiece electrode on the basis of EDM to improve the processing conditions in ultrasonic vibration assisted EDM process.
超声电火花复合加工实质上就是在普通电火花放电加工的基础上，在工具电极或工件上叠加一个超声振动，以改善放电加工条件。
For guaranteeing the stability of blisk twisty tunnel in ECM, a process mode was presented, where the tangential velocity of cathode relative to workpiece kept steady in the whole process.
为保证整体叶盘扭曲通道电解加工的顺利进行，提出了工具电极相对于工件的运动在全程中保持切向恒速的加工方式。
For guaranteeing the stability of blisk twisty tunnel in ECM, a process mode was presented, where the tangential velocity of cathode relative to workpiece kept steady in the whole process.
为保证整体叶盘扭曲通道电解加工的顺利进行，提出了工具电极相对于工件的运动在全程中保持切向恒速的加工方式。
应用推荐