Induction hardening with forced shot-peening;
感应加热淬火，加以强力喷丸；
A high frequency induction hardening machine for chain pin was researched and designed.
设计并制造了一台锯链链轴高频感应加热淬火机械装置。
Flame hardening and induction hardening are the methods usually used to harden larger gears.
火焰淬火和感应淬火是经常在大型齿轮上使用的热处理方法。
A new numerical control vertical universal induction hardening machine is introduced in this paper.
介绍一种新型数控立式通用感应淬火机床。
This process has been successfully used in induction hardening main-rails of Sanxia Dam and hydraulic power station.
确定后的工艺已成功应用于长江三峡大坝及电站主轨的表面感应热处理。
The high frequency induction hardening can't raise the surface microhardness of the cold precision forging spur gear.
高频感应淬火不能达到硬化冷精锻直齿圆柱齿轮齿面的目的。
This paper introduces a floating device that used for Surface medium frequency induction hardening of longer guideway.
本文介绍一种用于长导轨表面中频淬火的浮动装置，它能较好地解决浮动、电效率、冷却三问题。
Carburizing, cyaniding, and induction hardening are some of the processes commonly used to produce the case hardening effect.
碳化、氰化、感应淬火是局部淬火中经常使用的处理方法。
The results show that pulse induction hardening can lead to super-hardening effects, giving little deformation of the hardened parts.
结果表明，与普通高频淬火相比较，感应脉冲淬火工件变形微小，并可获得超常增硬效果；
The hardening case depth and hardness curve can be changed by adjusting heating time, heating power and cooling speed during induction hardening.
在感应淬火中，通过改变加热时间、加热功率和冷却速度可以改变淬硬层深度和硬度梯度。
This paper is the research of wear resistance for the specimen of grey cast iron and nodular iron by laser treating, induction hardening and nitrocarburizing.
本研究针对常用的灰铸铁及球墨铸铁材料分别进行激光处理、感应淬火和氨化处理，然后进行耐磨性对比试验。
The authors explained a method of contact induction hardening for vehicle steering gear racks, which was based on the experience of actual production and experiment.
根据试验及生产实践经验 ，简述了汽车转向齿条接触式感应淬火的操作方法。
The principle of this method was discussed, an effective method was found for controlling the distortion of a sleeve fork like produce after high frequency induction hardening.
进行了套管叉高频淬火工艺试验，解决了该零件的淬火畸变问题。
Grinding hardening, the technology of hardening steel piece surface with grinding heat instead of high or medium frequency induction hardening heat, can integrate grinding surface hardening.
磨削强化处理技术是利用磨削热替代高、中频感应淬火热源对钢件表层进行强化处理，将磨削加工与表面强化合为一体。
The simulation on medium frequency induction hardening process of crankshaft in 6110 engine is carried out by using FEA software ANSYS with hardening depth predicted and residual stress calculated.
利用A NSYS有限元分析软件，进行了6 110钢曲轴的中频感应淬火过程的模拟计算，并预测了淬硬层的深度，计算了淬火后的残余应力分布。
Surface induction-hardening offers the possibility to selectively harden a component's raceway, while leaving the remainder of the component unaffected by the hardening process.
表面感应淬火提供有选择地淬硬部件滚道而部件的其余部分则不受淬火过程的影响的可能性。
Extracted from the authors' new book on induction heating, this comprehensive overview of gear hardening includes sections on material selection, hardness patterns, coil design and heating modes.
本文摘自作者关于电磁感应热处理的新书，全面地概述了齿轮淬火，包括零件的材料选取、硬度模式、线圈设计和加热方式等。
Processing technology to shore up the axle, the right rail Induction surface hardening is a key process, quenching determines the quality of care dealing with the use of effects and life axle.
在托轮轴的加工工艺中，对钢轨表面的中频感应淬火是一道关键工序，淬火处理的质量决定了托轮轴的使用效果和寿命。
Typical materials include ductile iron castings or steel forgings. Most crankshafts require some form of heat treating including case hardening, nitriding and induction harden.
特殊的材料包括球墨铸铁和钢煅品，大部分机轴经过热处理，表面硬化、渗氮和感应淬火。
Figure induction coil surface hardening of medium frequency current flowing through the great but will heat the surface of the workpiece.
表面淬火如图感应线圈流过很大的中频电流而将工件表面加热。
Induction surface hardening of the workpiece material is usually carbon steel.
感应加热表面淬火的工件材料一般为中碳钢。
Using infrared system the apparatus of non-touching at limited-area to monitor the hardening temperature at site is produced for high-frequency induction heat treatment.
利用红外测温原理，研制出高频热处理时的小目标非接触式在线动态监控淬火件温度的装置。
Using infrared system the apparatus of non-touching at limited-area to monitor the hardening temperature at site is produced for high-frequency induction heat treatment.
利用红外测温原理，研制出高频热处理时的小目标非接触式在线动态监控淬火件温度的装置。
应用推荐