As a result, it was found that injection speed could be increased through varying nozzle port opening width under keeping constant injection pressure.
实验结果表明，在压力恒定的条件下，可通过控制喷嘴开启量大小获得不同的注射充填速度。
In this paper, the small signal port characteristics is established by the "perturbation signal feedback injection method", which lays a foundation of the system stability analysis.
本文在对系统进行适当简化的前提下，采用“扰动信号反馈注入法”建立了系统的小扰动端口特性，为系统的静态稳定性分析奠定了基础。
Wavelength switching together with the switching of the dominating output port of the fiber laser is achieved by controlling the power of a tunable injection laser.
通过控制一个可调谐注入激光器的光功率实现了该激光器的波长切换和主输出端口切换。
The injection mandrel is equipped with a port - and check-valve system to direct fluid pumped down the annulus or injection line into the production conduit.
配注器装有孔口阀和单向阀系统，使泵入的流体沿环空向下或沿注入管线向下进入生产导管。
Clean the injector port, replace critical injection port seals, replace injection port liners, and change septa as needed.
清洗进样口，如有必要，更换密封垫，衬管，隔垫。
In the system, composite application in dosing mode for an anaesthesia machine can be realized through the connecting seat on the dosing port of the injection seat.
在本发明中，通过在注液座的加药口上设置连接座，可以实现麻醉机加药方式的复合应用。
An amount of water can be injected through an injection port at the position of a handgrip so as to control the size of the saccule.
通过手柄处的注射接口可以注入适量的水以控制球囊的大小。
The electromagnetic pulse(EMP) damage mechanism and failure modes are obtained for the input port and output port of solid state relays by current injection method.
本文通过电流注入法对某型直流固态继电器输入端与输出端的电磁脉冲损伤机制进行了实验研究，确定了两种失效模式。
The deflection angle of injection mainly depends on the valve port angle and almost has no relation to the valve size, but the reduction coefficient vavies with both of them.
射流的偏转角主要受阀口角度的影响，几乎与阀口尺寸无关；但射流的收缩系数则与两者都有关系。
Apparatus - a gas chromatograph consists of a carrier gas source, an injection port, column, detector, and recording device.
仪器—一台气相色谱仪包括了载气源、进样口、色谱柱、检测器和记录设备。
When the intake temperature is increased, the fuel distribution becomes more homogenous, the effects of different port injection strategies on combustion process become small.
进气温度提高后，混合气均匀性得到改善，喷油策略对燃烧过程影响作用减小。
When the intake temperature is increased, the fuel distribution becomes more homogenous, the effects of different port injection strategies on combustion process become small.
进气温度提高后，混合气均匀性得到改善，喷油策略对燃烧过程影响作用减小。
应用推荐