The influence of inner cone hole depth changes on the jet performance is investigated by numerical simulation and experiment.
通过数值模拟和实验测试相结合，研究了锥孔深度变化对外部射流的影响。
This paper illustrates the principle of the inner cone grinding twist drill and the process of grinding experiments on the tool grinder.
阐述了内锥面法刃磨麻花钻的原理以及在工具磨床上进行磨削工艺试验的方法。
No significant difference in the strength degradation among all static loading specimens and no inner cone cracks occurred in static loading specimens.
不同加载时间下的静态加载试件强度下降的差异无统计学意义，同时不伴随内锥状裂纹的产生。
The inner cone grinding method of twist drills is discussed. The phenomenon of up tail in the grinding method is exposed and the solving idea is given.
阐述了麻花钻内锥面刃磨法的原理及参数的确定方法，揭示了内锥面刃磨中存在“翘尾”现象的原因并提出了相应的解决措施。
Illustrates the principle of the inner cone grinding twist drills, the process of grinding experiments on the tool grinder and the adjustment of the tool grinder.
阐述内锥面刃磨麻花钻原理及在工具磨床上进行磨削工艺试验的方法和机床的调整。
Within the shadow of the ash cone lies a white, funnel-shaped inner crater that is 200 meters deep.
在三角形的暗影里是深达200米的白色漏斗形内心火山口。
The metal-plastic composite nut, according to Claim 1 and 2, is characterized in that the inner surface at one end of metal insert is cone-shaped sealing surface.
根据权利要求1或2所述的金属塑料复合螺帽，其特征在于所述金属嵌件一端部的内表面为锥形的密封面。
These droplets trickle down the inner wall into a circular trough at the inner base of the cone.
这些液滴在内璧滴下进入圆锥体底部的圆形槽内。
With analysis of structure of cone roller bearing inner ring forgings, corresponding improvement on original forging technology has been put forward.
分析圆锥滚子轴承内圈锻件结构，对原锻造工艺中的不足提出了相应的工艺改进措施。
The inner surface at one end of metal insert is cone-shaped sealing surface.
上述金属嵌件一端部的内表面为锥形的密封面。
With increasing the inner space of the hydrocyclone cone, the improvement of separation performance became more remarkable.
随着旋流器锥段内部空间的增大，中心固棒使旋流器分离性能提高的幅度也增大。
Tapered roller bearings are generally separable, i. E. The cone, consisting of the inner ring with roller and cage assembly, can be mounted separately from the cup (outer ring).
圆锥滚子轴承通常是分离型的，即由带滚子与保持架组件的内*$$}圈组成的圆锥内*$$}圈组件可以与圆锥外圈（外圈）分开安装。
STAND: Overall width of the assembled bearing; refers to the combination of sizes of the cone, outer diameter, cup, inner diameter, and roller.
座高：整套轴承的总宽度；参考内外圈尺寸，外径，内径以及滚子。
The center of the lower part of the main body is equipped with a cone inner hole. The head of the inner hole is hemi-spherical.
主体的下部中心设有圆锥形内孔，该内孔的头部为半球形。
If an oil slinger is used behind the inner pinion bearing cone, deduct the thickness of the slinger from the dial indicator reading and use that total for shim selection.
如果抛油环用在内侧驱动小齿轮内圈的后面，从针盘指示表读数中扣除抛油环的厚度，垫片的选择用这个总数。
Bearing inner ring (shaft circle) of the basic cylindrical hole or holes in the internal tapered cylinder or cone in the axis line access.
轴承内圈(轴圈)的基本圆柱孔或圆锥孔的内接圆柱体或内接圆锥体的轴心线。
Using numerical simulation software, with setting different gas pressure in pipe, the pressure loss coefficient of inner-cone flowmeter was simulated.
利用数值模拟软件，通过改变管道内气体的压力，对内锥流量传感器的压力损失系数进行模拟研究。
The main air chamber is of a combination shape of the cylinder and the cone, and an inner chamber which consists of the cylinder and the cone is arranged in the main air chamber.
主气室外形为圆柱体和圆锥体组合形状，主气室内部有圆柱体形和圆锥体形组成的内室。
With cars, milling, boring, drilling four automation function, can be turning sphere, cylinder, cone, thread, tapping, end face, inner and outer ring groove, etc.
具有车、铣、镗、钻四大自动化功能，可车削球面、柱面、锥面、螺纹、攻丝、端面、内外环槽等。
Test B: Bunsen Burner A 3/8〞Bunsen burner was adjusted to a quiet flame with a 1-1/2〞inner blue cone and then overturned on the test material, exposing material to the flame for 5 minutes.
测试B：煤气喷灯。将一个3/8〞 的煤气喷灯调到稳定的火焰使其蓝色锥形内焰为1-1/2〞，然后，将煤气喷灯翻转，是火焰接触所测试的材料5分钟。
TIGHT IN CENTER : Condition of inner diameter of cone; inner diameter is not straight.
中心偏紧：出现在内圈的内径里，内径不是直的。
Some problems related to GB150 inner pressure cone are analysed. Many comments are given to the cone shell calculation of GB150, basing on the comparison with international standards and codes.
就GB150压力锥体设计的有关问题进行了分析，并在对比有关国外规范的基础上对GB150的锥体计算提出了一些看法。
The strain clamp comprises an internal thread pull anchor, a sleeve, an inner-cone external thread core sleeve, an outer-cone elastic clamp core, a bush, and the like.
由内螺纹拉锚、套管、内锥外螺纹芯套、外锥弹性夹芯、衬套等组成。
The strain clamp comprises an internal thread pull anchor, a sleeve, an inner-cone external thread core sleeve, an outer-cone elastic clamp core, a bush, and the like.
由内螺纹拉锚、套管、内锥外螺纹芯套、外锥弹性夹芯、衬套等组成。
应用推荐