As it was melting away I hurried off to finish welding a large ingot mold from heavy Angle iron.
由于这是融化我跑去找完成沉重的角铁焊大型钢锭模。
The ingot mold made of vanadium titanium vermicular graphitic cast iron has the best comprehensive property.
钒钛蠕墨铸铁是一种新型的工程结构材料，用钒钛蠕铁制造钢锭模具有良好的综合性能。
The counterweight iron classifies generally according to the modelling method, in the custom divides into the ordinary sand mold counterweight iron and the special counterweight iron.
配重铁一般按造型方法来分类，习惯上分为普通砂型配重铁和特种配重铁。
Based on analysis of market conventional sand mold cast process has been compared with EPC process of which design and measures for s. g. iron pipes have been introduced as well as key of technology.
从市场分析入手，对EPC法与传统砂型铸造工艺进行了比较，介绍了EPC法生产球墨铸铁管件的工程设计内容及对策，并提出了工艺设计的关键点。
The casting technique with top gating system, outer shaped iron chill, compound casting mold and core assembly molding was used for producing aluminum impeller on a large scale successfully.
详细介绍了采取顶注式浇注系统、成形外冷铁、复合铸型、组芯造型的铸造工艺，成功地生产出批量铝叶轮。
An introduction was made to volumetric changes of castings and dimension changes of mold cavity occurring during liquid cooling and solidification of nodular iron castings.
介绍球铁冷却、凝固过程中的体积变化以及型腔尺寸变化。
The CB wash can be used to produce as-cast centrifugal ductile iron pipes by heated mold method.
并可用于热模法铸态离心球铁管的生产。
In order to improve the abrasion-resistant on the casting surface, the low-Cr cast iron matrix composite reinforced by WC particles in sand mold was made in the experiment.
为了提高铸件表面的耐磨性，实验以低铬铸铁为基体，WC颗粒为增强体，制备出颗粒增强表面耐磨复合材料。
By adding molten iron scrap to enhance the chute and adjust the distance between the pipe mold, pipe mold reform and other measures will be laminated Dabao tube reduced the percentage of 0.68%.
通过在铁水中加入废钢，加强对溜槽与管模之间的距离调整，管模改造等措施将夹层打爆管所占比率降为0.68%。
The service life of the boron surface alloying grey cast iron ingot mold is 43% longer than that of high Mn low si grey cast iron ingot mold.
试验结果表明：铸渗硼灰铸铁钢锭模比同类灰铸铁钢锭模的使用寿命提高43％。
Mold filling speed of iron casting in lost foam casting was experimentally measured.
通过试验测试了铸铁件消失模铸造的充型速度。
Influence of the initial temperature fields and mold hardness on the shrinkage defect of ductile iron casting by EPC process was mainly investigated in this paper.
本文主要讨论了初始温度场和铸型硬度对消失模铸造球墨铸铁件收缩缺陷的影响。
A comparative test between green sand mold casting method and resin sand-coated iron mold casting method was conducted.
介绍了球铁刹车盘的不同铸造工艺，对粘土砂湿型铸造工艺和覆砂铁型铸造工艺进行了试验对比。
Therefore, it is necessary to study the application of vanadium-titanium vermicular cast iron in ingot mould, glass mold, auto brake drum and brake disc using abundant V-Ti iron in China.
因此，利用我国丰富的钒钛生铁资源，开展钒钛蠕墨铸铁在钢锭模、玻璃模具以及汽车刹车鼓和列车制动盘等方面的应用研究很有必要。
A suitable method to study the characteristic of the mold filling process of iron castings was designed and discussed from the point of experiment.
从试验的角度出发，设计和探讨适合于研究负压实型铸造高熔点铸铁合金充型过程的研究方法。
The abnormal structure usually appears at the surface layer of nodular iron castings produced by furan-sulfonic acid cured sand mold.
通过实验研究，用甲苯磺酸作催化剂的呋喃树脂自硬砂与稀土镁作催化剂生产的球铁件，通常在其铸件表层出现异常组织。
The sand-lined metal mold casting technique for bimetallic squeezing axle was investigated. The suitable chemical composition in the white cast iron was to be adjusted.
介绍了双金属榨轴的铁型覆砂铸造工艺，并对榨螺用白口铸铁的化学成分作了适当地调整。
The sand-lined metal mold casting technique for bimetallic squeezing axle was investigated. The suitable chemical composition in the white cast iron was to be adjusted.
介绍了双金属榨轴的铁型覆砂铸造工艺，并对榨螺用白口铸铁的化学成分作了适当地调整。
应用推荐