The industrial application result of Pd-type C5/C6 isomerization catalyst was presented.
报道钯型C5／C6异构化催化剂的工业应用试验结果。
The result showed that the activity of the isomerization catalyst made from such high silica mordenite can satisfy the industrial demand.
结果表明，采用本高硅载体制成的异构化催化剂活性达到了工业要求。
The esterification catalyst and the isomerization catalyst all have less corrosive effects to the equipment. The purification of the product is simple. No pollution happens.
所采用的酯化催化剂和异构化催化剂对设备腐蚀较小，产品后处理简单，无三废。
PdPM was used as a hydrocracking catalyst, which exhibited high activity of hydrocracking, strong aromatic saturation and good isomerization performances at lower temperature.
结果表明，钯层柱粘土是一种低温下裂化活性高、芳烃饱和性能强、异构化性能好的加氢催化剂。
The preparation method and technological conditions of ethylidennorbornene with the method of isomerization of vinylnorbornene are studied with the catalyst of solid super alkali.
研究了在固体超强碱催化下由乙烯降冰片烯异构化制取乙叉降冰片烯的工艺方法和条件。
The suppression of skeletal isomerization caused by coke deposition on the active sites of catalyst is in a lesser extent than that of cracking.
焦炭对催化剂酸中心的覆盖能抑制骨架异构化反应，但其影响幅度小于对裂化反应的影响。
The paper presents the preparation of non-noble metal catalyst for Light paraffine isomerization at low temperature.
对轻质烷烃低温异构化非贵金属催化剂制备进行了研究。
The initial activity of catalyst in isomerization reaction of propylene oxide have been evaluated with microreactorchromatograph.
采用微反-色谱联合装置对环氧丙烷开环异构化反应中催化剂的初活性进行了评选。
The principle of skeletal isomerization reaction of C_5 olefin, advances in research of catalyst, and the present situation of isomerization process were discussed and reviewed.
对C_5烯烃骨架异构化反应原理、催化剂的研究进展，以及异构化的工艺现状作了探讨和综述。
The isomerization of 2-methyl 1-butylene(2MB1) to 2- methyl 2-butylene(2MB2) was carried out over a resin catalyst.
在酸性树脂催化剂上进行了2甲基1丁烯（2MB1）的异构化，得到了高2 甲基2 丁烯含量的异戊烯产品。
The conjugated linoleic acids (CLA) were prepared by alkali isomerization with KOH as catalyst, butyl alcohol as solvent and suaeda salsa seed oil as raw material.
采用KOH为催化剂，正丁醇为溶剂，碱蓬籽油通过碱性异构化反应制备共轭亚油酸(CLA)。
The isomerization of methyl ester of cottonseed oil by the catalyst iodine was investigated.
研究了棉油甲酯在碘的催化下发生异构化反应的规律。
It can be used as catalyst or catalyst carrier for dewaxing via isomerization, selective hydrogenation, cracking, condensation of alcohol and aldehyde, etc.
可在异构脱蜡、选择性加氢及裂化、醇醛缩合等反应中用作催化剂的活性组分和载体。
The isomerization of butene-1 occurred in kinetic region with 30 ~ 40 mesh catalyst.
当用30 ~40目催化剂时丁烯- 1异构化在动力学区域。
Conjugated linoleic acids (CLA) were prepared by alkali isomerization using KOH as catalyst, 1, 2propanediol as solvent and natural vegetable oils as raw material.
采用KOH为催化剂，丙二醇为溶剂，天然植物油为原料，碱性异构法转化为共轭亚油酸。
Then conjugated linoleic acids were prepared from fungal oil by alkali isomerization using KOH as catalyst and 2-butoxy ethanol as solvent for the first time.
本文首次以曲霉油作为原料，选用乙二醇单丁醚作为溶剂，KOH作催化剂，碱催化异构化法制备共轭亚油酸。
The synthesized molecular sieve is catalyst used widely in the catalytic reaction of converting hydrocarbons, such as hydrocarbon isomerization and aromatization, etc.
本发明合成的分子筛作为催化剂，可广泛用于烃类转化的催化反应中，如烃类的异构化和芳构化反应等。
In the invention, a catalyst containing cobalt MCM-41 is prepared by the method of doping and loading, and has good olefin skeletal isomerization activity in the hydrodesulfurization condition.
本发明通过掺杂和负载的方法制备了含钴m CM - 41催化剂，在加氢脱硫条件下表现出良好的烯烃骨架异构活性。
In the invention, a catalyst containing cobalt MCM-41 is prepared by the method of doping and loading, and has good olefin skeletal isomerization activity in the hydrodesulfurization condition.
本发明通过掺杂和负载的方法制备了含钴m CM - 41催化剂，在加氢脱硫条件下表现出良好的烯烃骨架异构活性。
应用推荐