The utility model relates to a steady laser pumping up-conversion luminescence microscope which belongs to the technical field of an optical microscope.
本实用新型属于光学显微镜技术领域，具体为一种稳态激光泵浦上转换发光显微镜。
Laser pumping magnetometers using alkali vapors as sensing medium can reach very high sensitivities in magnetic fields covering the range from the earth magnetic field to biological magnetic fields.
激光光泵碱金属磁力仪具有很高的灵敏度，测量范围可以从地球磁场到生物磁场。
Constitutional parameters of the pulsed dye laser and properties of the pumping laser are given.
本文给出脉冲式可调谐染料激光器的结构参数及其泵浦源的性能参数。
The results show, the light frequency shift can be effectively reduced in the sharp Angle laser light pumping scheme.
结果表明斜光抽运方案可以有效降低铯原子束频标中的光频移。
The pumping light wave and the laser oscillation wave are determined by the ultraviolet-visible absorption spectra and fluorescence spectra, respectively.
由吸收光谱确定泵浦光波长，由荧光光谱确定激光振荡波长。
Eexperiments indicate that the key of er glass laser design is pumping symmetry and uniformity.
实验表明，抽运的对称性和均匀性是设计铒玻璃激光器的关键。
Homogeneous pumping induced time dependence of temperature distribution in Bolid state laser rods during pumping is. Calculated.
计算了在光泵期间均匀光泵引起激光棒中温度分布随时间的变化。
End pumping coupling is commonly used in coupling of high power fiber laser.
端面抽运耦合是高功率光纤激光器的常用耦合方式之一。
This method suits for pumping the fiber laser and amplifier of several watts output power.
该方法适用于输出功率为数瓦的光纤激光器和放大器的侧面抽运。
An new pumping configuration in CW ring dye laser was adopted and the, comparison with the conventional configuration was made.
本文提出了一种新型的环形染料激光器泵浦方式，并同常规的泵浦方式加以比较。
Useing high energy electron beam as pumping source to excite semiconductor crystal screen laser could be generated. It can realize high brightness and high resolution display.
用高能电子束作泵浦源，去激励半导体晶体屏，可以产生激光，实现高亮度高清晰显示。
In this paper a cesium beam maser is proposed in which the optically pumping state selection technique by two laser beams is used together with the atom storage bulb technique.
本文提出一种铯原子束激射器的建议，其中利用了双束激光抽运选态技术和原子贮存泡方法。
In order to raise the couple efficiency of pumping double cladding fiber laser, the beam is reshaped with rectangular prisms, spatial filtered and focused with aspheric lens.
为了提高双包层光纤激光器泵浦光的耦合效率，对泵浦光采用直角棱镜组进行了光束整形、空间滤波、非球面镜聚焦。
An new pumping configuration in CW ring dye laser was adopted and the, comparison with the conventional configuration was made. The experimental results were consisted with theoretic discussion.
本文提出了一种新型的环形染料激光器泵浦方式，并同常规的泵浦方式加以比较。实验结果与理论预示相一致。
There is the need for high duty-cycle laser diode array to satisfy the demand the DPSSL (diode pumping solid state laser) technology.
要满足当前的泵浦要求，高占空比大功率激光器阵列是必需的泵浦源。
The discharge circuit of excimer laser by high voltage discharge pumping was studied theoretically.
对高压放电泵浦的准分子激光放电回路进行了探讨。
The long pulse electron beam system reported here was constructed for transverse pumping and e-beam sustained discharge large energy gas laser.
本文介绍的长脉冲大面积强流电子束系统是为横向泵浦和控制放电泵浦大能量气体激光而设计和研制的。
In experiment, it was found that temperature increasing of original OPS-VECSEL is very serious with increasing pumping power a new type of semiconductor laser.
实验中发现，传统结构的光泵浦垂直外腔面发射半导体激光器，随着泵浦功率密度的增加，器件的温升现象严重。
A free electron laser with electromagnetic pumping wave is studied.
本文研究了电磁波泵浦的自由电子激光器。
The relationship among the laser threshold, the output intensity profile and the pumping fields has been studied experimentally.
实验研究了激光器的阈值和激光器输出的光强分布与泵浦光场之间的关系。
In this paper, the possibility of realization of a dye laser with double pumping source is discussed.
本文讨论了双泵染料激光器的可能性和途径。
The theory of side pumping Nd:YAG laser by high-power array-semiconductor laser cluster are discussed, on the basis of this theory, we design, make and justify the laser, and measure its data.
本文论述了大功率列阵半导体激光器组侧泵浦YAG激光器的工作原理，在此基础上进行设计、制作并对激光器进行调试和性能参数测量。
The influence of dynamic thermal effect induced by optical pumping of YAG crystal rod in a pulsed solid laser on the wave front of the output laser beam is studied in this paper.
本文研究了脉冲固体激光器的YAG激光棒光泵浦动态热效应对激光波面的影响。
The ray tracing and Monte Carlo method are applied to calculate the distribution of deposited pumping energy within a rod amplifier of the high power solid state laser system.
建立了用蒙特卡罗和光线跟踪法计算高功率固体激光系统棒状放大器能量沉积分布的模拟程序。
Time behaviors of the stimulated emission under relatively high pumping intensity, spontaneous emission, and laser pulses were compared, and hence the stimulated emission of ZnO thin films was proved.
比较了较高激发密度下的受激发射、自发发射和激光脉冲的时间特性，这些都证实了该发射是受激发射。
Partially end-pumped slab laser is an innovative solid state laser. Combining the hybrid resonator with partially end-pumping, the output power can be scaled at high beam quality(called InnoSlab).
部分端面抽运的板条激光器是一种新型固体激光器，配合混合腔可以实现在大功率下保持高光束质量的激光振荡输出。
The waveguide cavity structure provides a method which can reduce a threshold value and can obtain laser through low-power pumping for various laser gain materials with high threshold values.
这种波导腔结构为各种高阈值的激光增益材料提供了一种降低阈值，并可在低功率下泵浦获得激光的方法。
The temperature field and warming process of the transient and steady state in the laser rod by symmetrical trigonal side-pumping were simulated using the finite element analysis method.
用有限元法计算模拟了三角均匀分布侧面泵浦结构激光棒瞬态温升过程及稳态温度分布情况。
At last, by combining with side-pumping coupler technology, a new design model of high power DCF laser is proposed.
最后结合侧面泵浦耦合技术，提出了一种新的大功率双包层光纤激光器的设计模型。
The focus is given to the influence of pumping power, cavity length, the output coupler transmission and initial transmission on the repetition rate, pulse width and output power of laser output.
着重研究了抽运功率、腔长、输出镜透过率以及初始透过率等因素对激光输出脉冲序列的重复率、脉冲宽度以及输出功率的影响。
应用推荐