"They just take a laser scanner and copy them," he shrugs.
“他们仅使用激光扫描仪就复制了产品”，他耸耸肩表示无可奈何。
It presents a deformation monitoring method based on 3d laser scanner.
提出了应用三维激光扫描仪监测地形变化的方法。
First, it USES a laser scanner to determine the exact size and shape of the lesion.
首先，它用激光扫描仪来确定伤口的准确大小和形状。
The kinds of laser scanner and its functions in the laser scanning microscope are proposed.
列举了激光扫描器的种类，及在激光扫描显微镜中的作用。
The S100 laser scanner offers an efficient and economical way to prevent expensive downtime.
S100激光扫描仪提供了一个高效，经济的方法来避免产生昂贵的停机时间。
Using LS5000 3d laser scanner, we can acquire the point cloud data of the real actor's face.
利用LS 5000型三维激光扫描仪扫描真实演员人脸，可以得到其三维人脸点云数据。
Offers information on the mechanical hardware and the software of a simple 3d laser scanner.
提供关于机械硬件和软件的一个简单的三维激光扫描仪。
His wares are often pirated, of course. "They just take a laser scanner and copy them," he shrugs.
当然，他公司的产品常常被山寨，“有人就用激光扫描一下，接着就能出山寨品，”他无奈的说。
This article reports the research and analysis of power dissipation of a kind of laser scanner.
本文对一种激光扫描器的功耗进行研究。
The coordinate-measuring system integrates vision sensor, laser scanner, contact probe and CNC machine.
多传感器测量系统集成视觉传感器、激光测头、接触式测头和数控装备。
Bar codes, which can be read by a laser scanner, are used worldwide for inventory control on consumer products.
条形码可由激光扫描仪识别，在世界各地被广泛应用于消费品库存管理。
Basic principles and measurement methods of CCD vision-sensor, laser scanner and contact probe are researched.
研究CCD视觉传感器、接触式测头及激光非接触式测头的基本测量原理和测量方法。
Objective To test the reliability of the three-dimensional dental cast laser scanner for clinical applications.
目的对牙颌模型三维激光扫描系统的可靠性进行研究，并为其临床应用提供科学依据。
Normally, several observations will be needed to gain complete information while scanning an object using laser scanner.
一般情况下，需要从不同角度进行多次扫描才能获取目标对象的完整点云数据信息。
A laser scanner is included for measuring the glass geometry (dimensions, squareness) and for detection of edge chipping.
其中，激光轮廓扫描仪可以通过扫描玻璃板边沿，测量玻璃板的几何形状（尺寸，方正度等）。
An integrated method of laser scanner and rapid prototyping technology for prosthesis fabrication is presented in this paper.
文章介绍了一种基于激光扫描和快速成形技术制作假体的方法。
The key technique of jointing different measure station's data cloud is introduced in 3d laser scanner researching in the paper.
介绍了3维激光扫描仪研制过程中，把不同测站下的点云数据进行拼接的关键技术。
The paper discusses a new mobile robot localization method by means of fusion of a 2-D laser scanner and omni-directional vision.
讨论了通过二维激光传感器和全维视觉传感器提取数据融合技术进行移动机器人定位的新方法 。
With the wide application of the three-dimensional laser scanner in engineering, this technology has attracted the attention of many researchers.
随着三维激光扫描仪在工程领域的广泛应用，这种技术已经引起了广大科研人员的关注。
Using LS_5000 3d laser scanner, an efficient realistic 3d face modeling algorithm was proposed to create virtual actor for film and TV animation.
针对影视动画领域，利用LS_5000型三维激光扫描仪，提出了一套真实感三维人脸快速建模算法。
The characteristics of constitutes part of laser scanner system are analyzed and the principle of RIEGL LMS-Z620 laser scanner is also researched.
分析了激光扫描系统的各个组成部分的特点，研究了RIEGL LMS—Z620激光扫描仪的工作原理。
The ordnance non-contacting 3d data auto-collecting system based on laser 3d scanner is composed of PC, laser scanner and rotating platform device.
基于激光三维扫描仪的军械装备器材非接触式三维信息采集系统，由PC机、激光扫描仪及旋转台装置组成。
This research USES long range 3d laser scanner to scan building construction, in order to record point cloud information in a non-synchronous manner.
本研究主要利用长距离3d雷射扫瞄器针对建筑工程进行扫描，从纪录下来之点云资料进行非同步的工程管理作业。
The acquired data of 28 standard gypsum teeth crowns scanned by a 3-D laser scanner are processed, then the 3-D models of the crowns are reconstructed.
利用三维激光扫描仪扫描全牙列模型，对获得的数据进行处理，重构牙冠的三维图形；
By using the laser scanner for sensing the surrounding environment, an obstacle avoidance strategy of mobile robots under dynamic environments was designed.
以激光雷达作为主要的环境感知传感器，针对动态环境设计了一种移动机器人避障策略。
Using the spatial data captured via ground-based three-dimensional (3d) laser scanner, a study on three-dimensional modeling of spatial objects was conducted.
利用地面三维激光扫描仪获取的空间数据，进行了三维空间地物建模研究。
Objective: the acquired data of 28 standard gypsum teeth crowns scanned by a 3-d laser scanner were processed, then the 3-d models of the dens were reconstructed.
目的：利用三维激光扫描仪扫描全牙列模型，对获得的数据进行处理，重构牙颌的三维图形。
Objective: the acquired data of 28 standard gypsum teeth crowns scanned by a 3-d laser scanner were processed, then the 3-d models of the dens were reconstructed.
目的：利用三维激光扫描仪扫描全牙列模型，对获得的数据进行处理，重构牙颌的三维图形。
应用推荐