In this paper the mechanism of lateral bending deformation of Lear springs is studied.
对钢板弹簧的侧向弯曲变形机理进行了分析。
Choose a different bus schedule to be completed mold plane bending, lateral bending and other processes.
选用不同的模具可以完成母线排的平面弯曲、侧向弯曲等加工工艺。
A combination of lateral bending plus flexion or lateral bending plus extension strongly increased the maximum shear strains.
合并有侧弯加屈曲或侧弯加伸展的运动很明显地增加了最大切应力。
The stability with wire fixation was greater and equal to in flexion and in extension, lateral bending and axial rotation respectively.
棘突钢丝固定在前屈运动方向上可加强节段的稳定性，可恢复节段在后伸、侧弯和轴向旋转运动方向上的稳定性；
The model and the specimens were loaded with pure unconstrained moments of 7.5 Nm in flexion, extension, lateral bending, and axial rotation.
模型及标本承受屈曲、伸展、侧弯及轴向旋转的纯的不受限的7.5Nm大小的负荷。
And the increasing of prepreg tack can significantly improve the lateral bending performance, which all agree with theoretical prediction well.
增加预浸料黏附力可显著提高其侧向弯曲性能，符合理论分析结果。
The results show that the lateral bending performance of prepreg increases with the increasing of temperature, pressure, and decreasing of speed.
结果表明：随着温度增大、压力和速度减小，预浸料的侧向弯曲性能提高；
Results The range of motion (ROM) of process wire was less than that of the intact in flexion, extension, lateral bending, but not in axial rotation.
结果棘突钢丝在屈伸和侧弯时的运动范围可恢复完整颈椎水平，但旋转时的运动范围比完整颈椎大。
Lateral bending plus axial rotation yielded the highest increase in fiber strains, followed by axial rotation plus flexion or axial rotation plus extension.
在轴向旋转加屈曲或轴向旋转加伸展时，侧弯加轴向旋转是纤维强度增强的最大。
Test the stability of the models of the control group and the groups with and without bone graft in axial compression, lateral bending, flexion-extension and rotation.
测试模型对照组、植骨组和非植骨组在垂直压缩、侧弯、屈伸和旋转方向上的力学稳定性。
Compared between groups, cervical anteflexion, left and right lateral bending, left and right rotative activity showed significant difference at the 1 month after treatment(P<0.05).
组间比较两组1个月随访时在颈椎前屈、左屈、右屈、左旋、右旋5个方向的活动度变化值均有统计学意义（P<0.05）。
Results:There were significant difference in the strength to resist bending, extending, lateral bending, axial torsion and axial displacement of the fusion unit between the two groups.
结果：复合骨环组在抗屈曲、抗伸展、抗侧弯和抗纵向位移方面与自体髂骨块组间存在显著性差异。
Static analysis of Model LCJ1250 chain pumping unit indicates that the rather low reliability of the unit is due to the premature failure of the path chain caused by the action of lateral bending.
对LCJ1250链条抽油机的静力学分析与计算表明，由于轨迹链条承受侧向弯曲作用而早期失效，造成抽油机可靠性低。
The medial and lateral curvature of larger width curved girder bridge is much different, as well as the influence of the medial and lateral bending stress is very large of curved slab girder bridge.
宽度较大的曲线桥梁的内外侧曲率就相差较大，对 曲线梁板桥内外侧的弯曲应力影响也非常大。
In this paper, problems of bending of thin plates under the combined action of lateral loading and in-plane forces are studied by means of perturbation method.
本文应用摄动方法研究了薄板在侧向载荷和中面力的联合作用下的弯曲问题。
With the horizontal load, the lateral displacement curve of the structure is divided to shearing type and bending type .
在水平荷载作用下，建筑结构的侧移曲线分为剪切型和弯曲型两种。
This paper can satisfy the requirement with steady lateral buckling with the method that scales down the bending moment and abate the space between beams.
文章通过计算分析，发现可以用支座负弯矩调幅和减小梁间距的办法，满足侧向稳定的要求。
At last, the author analyzes and studies numerical simulation of stretch bending forming with lateral compression.
在论文的最后进行了有侧压拉弯成形模拟的分析与探讨。
For exposing the the dynamic response characteristic of CFST under lateral impact, the same samples of the bending static test and the same air-filled steel component impact test were completed.
为揭示钢管混凝土构件侧向冲击动力响应的特性，完成了同种试件的单点侧向弯曲静载试验和相同壁厚空钢管构件侧向冲击实验。
When vertical loads applied to a straight beam, the structure will have large bending and torsion and lose steady, this phenomenon is called lateral torsion buckling.
结构失稳的类型有很多种，其中直梁在竖向荷载的作用下，结构发生了较大的竖向弯曲变形和侧向扭转变形，而导致结构失稳称为梁的侧扭屈曲。
In this paper, the lateral vibration dynamic analysis model of continuous box girder viaduct is presented in which the bending, torsion and distortion of box girder can be considered.
本文提出了可以考虑箱形梁弯曲、扭转、畸变多种因素的梁-墩系统横向振动的动力分析模型。
One of end of specimens, another end surface as inside surface as the lateral and bend it repeatedly until it breaks. record record slice bending times.
试片之一端表面作为内侧，另一端表面作为外侧而予以往复弯折，至试片损伤时记录弯折次数。
Frontal movements involve lateral flexion and bending on both sides of the body.
额状面上的运动包含脊柱侧弯及身体两边的弯曲。
Periodical bending resistance test in screws with hollow lateral holes in pedicle of vertebral arch was made on the rest 12 vertebrae.
另外12个椎体做空心侧孔椎弓根螺钉的周期抗屈试验。
And make out the program to obtain bending moment, shear force and lateral earth pressure of piles based on measured bending moment through model tests.
并且编制由实测弯矩推桩身弯矩函数，桩身剪力，土压力的程序。
The result showed that the bending moment would had great influence on the limit lateral capacity of the masonry wall.
结果表明弯矩对墙体抗侧承载力有很大的影响。
According to this view, this paper compiles a practical calculation program, which provides the vertical and lateral shear, bending moment as wel...
按照这一思想编制了实用程序，可对一般船进行外力计算，提供纵向和水平方向的剪力、弯矩以及扭矩。
The maximum lateral displacement decreases when the pile stiffness increases, while the maximum bending moment is hardly influenced by the pile stiffness.
最大位移随桩的抗弯刚度的增加而减小，而最大弯矩受抗弯刚度的影响很小；
Lateral displacement and bending of inclined pile could be reduced with the introduction of pile cap.
承台有助于减小倾斜桩的水平位移与挠曲。
Lateral displacement and bending of inclined pile could be reduced with the introduction of pile cap.
承台有助于减小倾斜桩的水平位移与挠曲。
应用推荐