To reduce the lathe-bed and assure its stiffness requirement, a batten wall pore structure is designed.
为了减轻床身的重量和保证床身的刚度要求，设计了板壁孔结构。
The paper establishes the 3D finite element model of a lathe-bed and calculates the result of vibration model analysis of it in ANSYS.
本文建立了某型立铣床床身的三维有限元模型，并利用大型有限元分析软件ANSYS进行了模态分析，得出了床身前十阶固有频率和振型。
Analyzed from the stress Angle, the lathe-bed is mainly imposed by a vertically upward force, moreover, the lathe-bed is not slender, so the direction of tangential stress should not be ignored.
从床身的受力角度看来，床身主要受到垂直方向上的力，而且床身不是细长的结构，切应力的方向不能忽略。
Now lathe bed lacks effective design of rational basis; structural design bed is not enough reasonable.
目前对普通车床床身的设计缺乏有效的理论依据，床身的结构设计不尽合理。
The paper deals mainly with the study of rational structure of a lathe bed by model tests.
本文主要论述运用模型试验来研究车床床身的合理结构。
The largest part of the lathe is called the bed on which the headstock and the tailstock are fastened at opposite ends.
车床的最大的零件称床身，车头和尾架被紧固在相反末端的床身。
The mold department has the CNC lathe, the bed, the drilling machine, the milling machine, the computer gong, the spark machine, the line cutter and so on.
模具部有CNC车床、礳床、钻床、铣床、电脑锣、火花机、线切割机等各类机台。
Metal major equipment: Lathe, meters bed cars, punch, drilling, milling machine, special equipment.
五金主要设备：车床，仪表床车，冲床，钻床，铣床，专用设备等。
Introduced one kind plan of the numerical control improvement on CE7120 slanting bed lathe, including transformations of machine partial and electrical partial.
介绍了一种CE7120斜床身车床数控化改造的方案，包括机械部分改造和电气部分改造。
Based on the analysis of torture and deformation of lathe bed after quenching, the machining process has been regulated, which acquires technical requirements.
对车床床身淬火后产生的扭曲变形现象进行分析，针对现行加工工艺的特点，改进了加工工艺技术。
The lathe bed is made of cast iron.
车床的床身是用铸铁做的。
The most common form of lathe is the turret lathe it consists of a horizontal bed supporting the headstock, the carriage and the turret.
最常见的车床形式是以图解方式显示的六角车床，它由一个支承床头箱、拖板和六角刀架的水平床身组成。
Green sand casting casting clay weight from a few kilograms until decades kilograms, machine tool lathe bed and clay dry type of casting production can be weighed dozens of tons.
粘土湿型砂铸造的铸件重量可从几公斤直到几十公斤，机床床身而粘土干型生产的铸件可重达几十吨。
All of the principal units of the lathe amounted on a bed having ways along which the carriage and tailstock travel.
车床的主要部件都装在具有导轨的床身上，刀架与尾架可沿着该导轨滑动。
A flexible finite element stiffness model of lathe bed is presented and analysed.
本文介绍采用有限元法计算车床床身的静刚度。
Tools and lathe tools do not put in the bed, lest knock on bad guide.
工具和车刀不要放在床面上，以免敲坏导轨。
A flexible finite element stiffness model of lathe bed is presented and analysed.
利用有限元法分析床身变形，校验了机床刚度。
In this paper, using the finite element method, we completed the computation of static rigidity for a lathe bed.
本文介绍采用有限元法计算车床床身的静刚度。
The heavy build of the EXE cantilever-bed lathe is evident from this picture.
沉重的EXE文件建立悬臂梁床车床于此可见图片。
Equipment has lathes, CNC Vertical lathe, CNC bed Big head, boring machine and so on.
设备有车床、数控立车、数控大头床、镗床等。
C6132 ordinary lathe is 320 mm Series lathe based products, C6232A saddle in the saddle bed lathe Machinable large diameter workpieces.
C6132普通车床是320毫米系列车床的基础产品，C6232 A马鞍车床在马鞍槽内可加工较大直径工件。
Washing bed, grinder, thread cutting, lathe.
洗床，磨制机床，线割切，车床。
The bed saddle subsidence phenomenon in general lathe often takes place after a long time using.
普通车床经过较长时间使用后，常常发生床鞍下沉现象。
We designed and produced the CNC universal tool milling machine, CNC bed type milling machines, CNC Lathe, vertical machining centers such as CNC machine products, and has many patent technique also.
他们先后设计生产过国内领先水平的数控万能工具铣床、数控床身铣床、全功能数控车床、立式加工中心等数控机床产品。并拥有多项专利技术。
Based on the casting process of bed, the actual lathe work condition, stiff and inherent frequency, we discuss feasibility of each plan.
依据床身的铸造工艺、车床的实际工作状况、刚度和固有频率等论证每个减重方案的可行性。
The lathe bed is made of cast iron.
这台车床（床、床、床、床、齿机、床）我们国内制造的。
As the large castins, lathe bed castings must be subjected to heat treatment in order to improve the performance itself, and improve the intrinsic quality of iron castings.
床身类铸件产品作为一种大型铸件必须要经过热处理才能提高本身的使用性能，改善铸铁铸件的内在质量。
The lathe bed is made of cast iron.
本文介绍采用有限元法计算车床床身的静刚度。
Main processing equipment CNC lathes, CNC milling machines, grinders, universal milling machine, lathe, drill, bed and so on.
主要加工设备有数控车床，数控铣床，磨床，万能铣床，普通车床，钻床等等。
Fixes in the saddle place, and is hanging in lathe bed front.
固定在鞍座上，并悬挂在床身的前面。
应用推荐