No light path can walk, as long as the heart is still there.
没有灯的小路一样可以行走，只要心还在。
We in detail presented the high accurate measurement of double light path.
着重叙述了高精度双光路测量法。
The basic process of realization of light path in search light system is introduced.
介绍了探照灯系统光路实现的基本过程。
With the imaging formula of the holographic lens, the principle of the light path adjustment is deduced.
首先由全息透镜(光栅)成像公式出发，推导出了该光路调节的基本原理。
Parents' love is a light path, we drive away the darkness, it brought us full of bright beautiful future!
父母的爱是我们前进道路上的指明灯，它把黑暗赶走，给我们送来充满光明的美好前程！ ！
The platform supports the adaptive establishment and removal of light path and wavelength-link monitoring.
该平台支持波长链路的自适应控制和波长链路物理传输参数的监测。
The system was equipped with line matrix CCD as sensing unit and improved on light path structure of sensor.
系统采用线阵CCD作为传感元件，对传感器的光路结构进行了改进。
A polarized confocal scanning microscope was successfully designed and developed according to its light path.
根据偏振共焦扫描显微镜的原理，成功研制了一台偏振共焦扫描显微镜。
The most important thing is how to calculate light path automatically in computer aided optical chart system.
在此基础上进而研究开发了计算机辅助光学作图系统。
The structure of the Light path transition module and unit module, and the interconnection board were designed.
对光路转换模块和单元模块以及该互连板的总体结构进行了分析和设计。
The self_pump phase conjugation reflectivity and response time were measured by using four_wave mixing light path.
利用四波混频光路测试了晶体的自泵浦位相共轭反射率和响应时间。
The optical elements of its out light path are changed and then it is equipped with a photoelectric detection system.
更换了光谱仪外光路元件，并加装了光电检测系统。
In the basis of introducing the standard of microscope, we design a kind of light path which can use CCD camera to observe.
在介绍了显微镜的规范标准的基础上，设计并确定了一条应用于CCD摄取显微图像的光路。
The fix would mean introducing corrective optics into the telescope's light path - Hubble's spectacles, as they came to be known.
而纠正这一失误需要在望远镜的光路上加装校正镜片——也就是后来广为人知的“哈勃的眼睛”。
The optical design method of the corrector is described in detail, and the design results and experimental light path are given.
详细讨论了补偿器的光学设计方法，给出了设计结果和实际的实验光路，分析了低温光学检测中的一些问题。
When a catalyst plug passes through the conduit it blocks the light path and thus the light intensity recorded by the detector drops.
当催化剂栓柱通过管道时，它遮断光路，因此检测器记录下的光强降低。
Compared with the system of tilted light path, its characteristics were studied. The design parameter of the optical system were given.
同时，进行了结构优选，对空间光路的实现方式作了比较研究，给出了光学系统的设计参数。
Abstract: Research is done on the measuring cell, light path and data acquisition system of a magnetomotive oxygen measuring instrument.
摘要：对磁动式测氧仪的测量池、光路和数据采集系统进行了研究。
With the method of differential optical absorption spectroscopy(DOAS), aerosol along the light path is measured with a flashlight source.
介绍了一种基于闪烁氙灯光源、利用差分光谱吸收（DOAS）技术监测大气气溶胶的新方法。
Special reflector and bracket were designed and proper calibrating step was adopted to ensure the light path work steadily and accurately.
在光路设计上，通过设计专用的反射镜、支架并采用合理校准步骤，确保光路准确稳定地工作。
The constant light path system is designed to make the length of light path in the process of machining unvarying by means of equalizing it.
笔者设计的恒光路系统通过对光路进行补偿，而使加工过程中光路长度恒定不变。
A correction model for Angle drift in target area is established through ray-tracing target area light path of ICF (Inertial Confinement Fusion) driver.
通过光线追迹ICF(惯性约束聚变)驱动器的靶场光路，建立靶场角漂的修正模型。
Liquid core optical fiber long light path absorption system consists of the light gathering system and liquid core optical fiber long light path absorbing tube.
液芯光纤长光路系统主要由聚光系统和液芯光纤长光路吸收管组成。
Therefore, to the big bang model different medium in the light path represents a particle in space and time, this is the life among physicists call "world line" things.
因此，异向介质大爆炸模型中光的路径代表了一个粒子处于空间和时间之中的寿命，这就是物理学家称之为“世界线”的东西。
The light path in the conduction process loss, avoid the traditional cutting bed due to optical transmission problems caused by large attenuation of laser cutting power.
使光路在传导的过程 中损失最小，避免传统裁床由于光路传输问题而造成激光切割功率的大量衰减。
Alternatively, calibration may be checked using a Polarization Reference Standard, which consists of a plate of quartz mounted in a holder perpendicular to the light path.
或者，校准可以通过使用一个偏振标准品来进行，该标准品由一片装在垂直于右侧通道的架子上的石英构成。
The centrobaric method was used to determine the position with the maximum modulation value of fringes and the position was used as the point of zero light path difference.
采用重心法确定干涉条纹调制度的最大值位置，并以此作为零光程差位置。
The design of the coupling lens's light path was discussed to guarantee enough light energy to enter the instrument and little effect on the resolution of spectral instrument.
为了保证该装置充分利用光能，又尽量减小对光谱仪分辨率的影响，对所使用的耦合透镜的光路设计进行了探讨。
The design of the coupling lens's light path was discussed to guarantee enough light energy to enter the instrument and little effect on the resolution of spectral instrument.
为了保证该装置充分利用光能，又尽量减小对光谱仪分辨率的影响，对所使用的耦合透镜的光路设计进行了探讨。
应用推荐