Study on Settlement Calculation of Pile Foundations by Load Transfer Method;
而传递波由物模确定的一种复合计算方法。
A new method to compute the pile head stiffness with the load transfer method is proposed in this paper.
本文提出用分层荷载传递法计算单桩刚度，能方便地考虑桩的可压缩性、分层土的性质和桩截面的变化。
In addition, some comparisons can be made between load transfer method and elastic theory method in this paper.
另外，本文还对荷载传递函数法和弹性理论法在壁板桩中的应用进行了初步对比。
In this paper a model of three elements is proposed for discussing the convergency of the load transfer method.
本文提出三单元式模型，讨论了荷载转移法的收敛性。
The influence of end conditions on the load transfer behavior of cast-in-place pile is discussed using the load transfer method.
以荷载传递法为基础，研究了桩端条件对灌注桩荷载传递特性的影响。
Meantime, by using the load transfer method and the nonlinear-analysis increment method, a series of analytical formulae are deduced to define the load-settlement relation and so on.
同时，利用荷载传递法及非线性分析的增量法，获得荷载-沉降关系等系列解析算式。
On the basis of load transfer mechanism and destruction patterns of single pile, load transfer method and shearing deformation method for subsidence computing of single pile are mainly discussed.
在分析单桩的载荷传递机理、单桩的破坏模式的基础上，重点探讨了单桩沉降的载荷传递法和剪切变形法。
Aiming at the decline of maximum braking force caused by the mass transfer during the course of braking, the article advances a method which USES active suspension system to reduce dynamic wheel load.
针对汽车制动过程中质量转移而使最大制动力下降的问题，提出利用主动悬架系统减小汽车动态车轮载荷的方法。
This paper finds a method which can indirectly control the load side voltage of the contact-less power transfer system.
本文研究了非接触电能传输系统中一种间接控制负载侧电压的方法。
A new method to get elevation sensitivity matrix and load sensitivity matrix is presented. The transfer matrix and force methods are used.
应用传递矩阵法与力法给出了一种简便实用的标高灵敏度矩阵与负荷灵敏度矩阵的计算方法。
According to mechanics character of expanded branches and plates and load transfer theory, a method of expanded branches and plates pile foundation settlement calculation is present.
根据挤扩支盘桩的受力机理，应用荷载传递理论和分层总和法计算沉降的概念，提出了一种多支盘不等支臂钻孔灌注桩基础沉降计算方法。
However, the load transfer mechanism of this pile is still not perfect, so far, there isn't practicable and unified method.
但是，对这类桩的荷载传递机理研究还不够完善，至今仍没有符合实际的统一计算方法。
Therefore, it is feasible to analyze the bearing capacity of a large diameter single pile by three parameters load transfer function model of pile body and pile top and numerical iteration method.
说明文章提出的方法对计算大直径单桩的荷载与沉降曲线具有较好的适用性，利用桩身和桩端的三参数荷载传递函数模型和迭代算法分析大直径单桩的承载性状是可行的。
Both load transfer characteristic and settlement characteristic of single pile can be predicted using this method, through a case, have shown that the new method is rational.
本文方法既能计算单桩荷载传递又能预测单桩变形特性。算例结果表明：本方法有较高的计算精度。
The transfer function method is a method of dynamic load identification.
传递函数法是动态载荷识别的一种方法。
The infection of related factors to load transfer rule on cement-soil pile through the load transfer function method was analyzed according to the displacement harmony theory.
根据位移协调理论，采用荷载传递函数法分析了竖向受荷下相关因素对水泥土桩荷载传递规律的影响。
A method to analyze load transfer was presented for composite-foundation with rigid pile and cushion by means of iterative process.
提出了用迭代法分析带垫层刚性桩复合地基荷载传递特性计算方法。
According to the ultimate bearing capacity control method, the effective length of a cement-mixed pile is calculated with the linear elastic-plastic load transfer function.
采用线弹塑性荷载传递函数，按极限承载力控制法确定水泥搅拌桩的有效桩长。
The pile-soil-cushion-cap interaction and the nonlinearity of load transfer for layered soil could be considered conveniently in this method.
该方法可方便地考虑桩、土、承台和垫层的相互作用，地基土的分层特性和桩身荷载传递函数的非线性。
The theory and measuring method of load-transfer function of piles are introduced.
介绍了桩的荷载传递函数理论及测试方法。
The paper analyzes mechanism of action and load transfer under group anchor, calculates load transfer-displacement by shearing displacement-transfer function method.
通过对群锚作用下的作用机理、荷载传递进行分析，使用剪切位移—传递函数法进行荷载传递位移计算。
The test results are converted to load-settlement curves of conventional testing method and the bearing behavior and load transfer characteristics are analyzed.
根据试验数据向传统静载试桩结果进行转化和对比，并对桩的承载性能与荷载传递特点进行了分析。
Starting with the force analysis on parts of the locomotive, a new method to calculate axle load transfer of locomotives was discussed in the paper and the calculation formulaswere derived.
本文的分析方法可以应用于任何轴式及悬挂型式的机车轴重转移计算。
The refined load-transfer method was used to analyze the settlement of socketed pile on soft rock foundation.
本文利用剪切位移法分析计算软质基岩上的嵌岩桩沉降变形。
The transfer-matrix method is used with the concept of the initial imperfection method of buckling analysis to the calculation of critical load.
本文用传递矩阵法在初始缺陷法的概念下对圆柱壳的一端有四个类似集中力的局部轴压作用下的失稳问题进行了研究。
The transfer-matrix method is used with the concept of the initial imperfection method of buckling analysis to the calculation of critical load.
本文用传递矩阵法在初始缺陷法的概念下对圆柱壳的一端有四个类似集中力的局部轴压作用下的失稳问题进行了研究。
应用推荐