And if the purple red: nonmagnetic as high manganese steel, magnetic usually usually steel or low-alloy steel.
而假如变紫红色：无磁性的为高锰钢，有磁性的通常为通常钢或低合金钢。
Bit using manganese steel manufacturing, through special processing, are suitable for all kinds of geological environment.
钻头采用锰钢制造，经过特殊加工处理，适用于各种地质环境。
Wear resistance high manganese steel 11-14%, for the excavator bucket, ball mill liner.
含锰11- 14%的钢有极高的耐磨性，用于挖土机铲斗，球磨机衬板等。
Effect of polarization potential on the corrosion-wear behavior of high manganese steel in ore slurry was investigated by a self-made impact corrosive-wear tester.
通过自制的冲击腐蚀磨损试验机，施加不同极化电位对高锰钢在矿浆介质中的冲击腐蚀磨损行为进行了试验研究。
Solidification microstructures in heavy section high manganese steel casting were simulated using coupling cellular automaton(CA)and finite element method(FEM).
采用元胞自动机与有限元相耦合的方法模拟厚断面高锰钢铸件凝固组织。
Our products: Various gray iron, ductile iron, common cast steel, low-alloy steel, high manganese steel, etc various parts of architectural and mechanical engineering.
本公司主要生产各种灰铁件、球铁件、铸钢件、高猛钢件等各种建筑、工程机械用零部件。
It was benifit to use the rubber lining instead of the manganese steel lining in the ball crusher.
球磨机采用橡胶衬板代替锰钢材板具有许多优点。
The core of the new manufacturing process for the high quality upgraded Manganese steel is fractionation modification, composite inoculation and microalloying technique, which are affected each other.
优质改性高锰钢生产新工艺的核心是将分级变质处理、复合孕育处理和微合金化技术三位一体，互为作用。
The influences of cryogenic treatments on the microstructure, material performances and the impact wear resistance of the superhigh manganese steel are studied.
主要研究了深冷处理对超高锰钢组织、性能及耐磨性的影响。
In this paper the effect of alloyed modification for carbon content, carbide shape and distribution in austenitic manganese steel has been studied.
研究了合金化变质改性对提高奥氏体锰钢基体碳含量，改变析出碳化物形态及分布的影响。
This kind of bicycles are made of manganese steel.
这种自行车是用锰钢制造的。
As a kind of typical hard machining materials, owing to its abrasion resistance and low cost, high manganese steel is widely used for those components that bear great impacts.
高锰钢是一种典型的难加工材料，因其优良的耐磨性和低廉的价格，被广泛用于制作受冲击较大的零部件。
The practical application and industrial investigation of metal magnetic liners have preliminarily showed the advantages of using metal magnetic liners in place of manganese steel liners.
通过对金属磁性衬板的实际应用和生产考查，初步表明了金属磁性衬板替代锰钢衬板的优越性。
The microstructure and properties of high manganese steel under the conditions of different rolling load were analyzed and studied through the om, TEM and HD-187.5 sclerometer.
利用光学显微镜、透射电子显微镜和HD- 187.5型硬度计对高锰钢在不同轧制应力条件下的组织和性能进行了分析和研究。
The study of damage of low temperature brittleness on high manganese steel has been carried out by theoretical analysis and a series of impact tests.
通过理论分析和系列冲击试验，对高锰钢出现的低温脆性损坏进行了分析研究。
The GB stipulates that high manganese steel should be dissolved by rare sulphuric acid, the silicon in the solution should be determined by the molybdenum blue photometric method.
针对用国标规定的稀硫酸溶解试样、钼蓝光度法测定高锰钢中的硅存在结果偏低的问题，试验验证了用硝酸溶样能保证测定结果的准确性。
Adopting the imported high strength manganese steel and international lead step molding technology, wear-resistant anti-pressured and long service life.
采用进口高强度锰钢和国际领先的一次成型铸造技术，耐磨、抗压、使用年限长。
In order to solve the surface chemical scab phenomenon of the high manganese steel casting, the method that replacing quartz sand with magnesium olivine sand was put forward in this paper.
介绍了为解决高锰钢铸件的表面化学粘砂现象，结合生产实际，提出将铸件原砂由石英砂改为镁橄榄石砂。
Large scale high manganese steel alligator board produced by EPC process can meet the request of design, and use with hot remained water toughening treatment.
消失模铸造生产大型高锰钢颚板，并按设计的工艺要求进行生产，利用余热水韧处理。
By two double-mediate layer method, using developed welding materials and technology of forced arc molding, butt joining tests of high manganese steel with rail steel are completed.
采用两种过渡层方法，使用研制的过渡层焊接材料，结合强制成形电弧焊工艺进行了高锰钢辙叉与钢轨双过渡层对接焊试验。
Broken walls, rolling ace tabular wall made of imported high-manganese steel, greatly reducing wear, the useful life by 70% -90%.
破碎壁、轧臼壁采用进口高锰钢制作，极大降低磨耗，使用年限提高70% - 90%。
The modified austenitic manganese steel is suited for the operating condition of impact-corrosive wear, chisel-cutting wear and high stress wear.
改性奥氏体锰钢适用于冲蚀磨损、凿削磨损以及高应力磨损等工况条件下。
The wear resistance of casting composite medium manganese steel has been studied under the condition of impact abrasive wear.
研究了铸造复合中锰奥氏体钢在冲击磨料磨损条件下的耐磨性能。
The austenite manganese steel when added to with Chromium element appears a new phase.
研究了铬加入高锰奥氏体钢中后，原奥氏体高锰钢组织中出现的一种新相。
The effect of alloying high manganese steel on microstructure has been studied.
研究了高锰钢合金化对组织的影响。
Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel.
比较两种材料试样在一定时间内的失重变化情况，表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
Broken such materials, plate hammer or hammerheads for high manganese steel can, so have the equipment jaw crusher, like bluestone, limestone hardness small and crisp.
破碎这样的物料，板锤或是锤头为高锰钢即可，这样的设备有颚式破碎机，而像青石、石灰石硬度小且脆。
It was found by industrial experiments that the wear resistance of the crusher hammers is about 4 times higher than that of the high manganese steel crusher hammers.
工业实验表明，复合变质处理高铬铸铁锤头的耐磨性约是高锰钢锤头的4倍。
Deposit on manganese steel possible.
可以堆焊在锰钢上。
The field tests indicated the service life of this alloy steel hammer is higher than high manganese steel, especially the cast can be raised to 60%.
装机试验表明，该材质锤头使用寿命比高锰钢高，特别是铸态中锰钢锤头寿命可提高60%。
应用推荐