With manual arc welding function.
具有手弧焊接功能。
The manual arc welding normally refers to the manual welding using coated electrode.
手工电弧焊通常是指采用药皮焊条的手工焊接法。
Equipments for manual arc welding consist of power source, current regulator, electrode holder and cables.
手工电弧焊的设备包括焊接电源、电流调节器、焊钳及电缆线。
Therefore, it always has good welding properties when carrying out manual arc welding at different position.
因此在各种不同位置进行手工弧焊时，均有良好的焊接性能。
The arc voltage is not easily controlled in manual arc welding, sometimes it is damaged to the quality of welding.
手工电弧焊的电弧电压是一个难以控制的参数，有时能对焊接质量产生较大影响。
The paper introduces the high toughnesses Ultra-low hydrogen electrode (new J807CF) which matches WCF—80 steel for manual arc welding.
本文介绍了高强高韧性超低氢新J807CF焊条，其各项性能均达到国外同类产品的先进水平，是WCF—80钢的专用配套焊条。
Welding, as far as possible using argon arc welding, manual arc welding should be used in small current, fast welding, to avoid the swing.
焊接时尽量采用氩弧焊接，采用手工电弧焊时应采用小电流、快速焊，避免摆动。
I am, electric welders engaged in manual arc welding and carbon dioxide welding work, through these years of electric welding work my technology …
我是电焊工，从事手工电弧焊和二氧化碳气体保护焊工作，通过…
Safety characteristics of manual arc welding and the accident due to it were described. Its cause was analyzed. Its safety prevention measures were put forwards.
通过分析手工电弧焊的安全特点和对引发事故的原因进行分析，提出针对防止手工电弧焊引发事故的安全防范措施。
By comparison with manual arc welding, it is found that the thermit welding is a efficiency, energy saving and high quality process for repair welding of steel ingot die.
根据对比铝热焊与手弧焊修复工艺，阐明了用铝热焊修复钢锭模是一种高效、节能、焊接质量好的新方法。
The national standard is suitable for welded joint of carbon steel and low alloy steel with gas welding (being used for sheet metal), manual arc welding and gas - shielded welding.
本标准适用于气焊(用于薄板)，手工电弧焊及气体保护焊焊接的碳钢、低合金钢焊接接头。
The physical and chemical properties of welding arc affecting the amount and toxicity of fumes generated during manual arc welding with low carbon steel basic electrodes are investigated.
本文研究了影响碳钢碱性焊条焊接烟尘量及其毒性的电弧物理及化学因素。
The experimental results show that the power source meets the requirements presented by the pulse TIG welding. DC TIG welding and manual arc welding, and is a new many functions power source.
研究结果表明，所研制的焊机可以满足脉冲tig焊、直流tig焊、手工电弧焊三种方法的焊接要求，是一种新型多功能焊机。
By using manual arc welding to repair the big kiln circle, the welding process of ZG310-570 super thick cast steel piece was a success, with good running effect observed for more than 5 years.
通过对大窑轮圈采用手工电弧焊的方法进行修复，成功地解决了ZG310- 570铸钢特大厚件的焊接工艺，经过5年多的运行观察，使用效果良好。
The joint microstructure and mechanical properties of high strength bainitic steel plate were studied by CO2 gas shielded welding(CGSW), submerged arc welding(SAW) and manual arc welding(MAW).
利用二氧化碳保护焊、埋弧焊、手工电弧焊研究了高强度贝氏体钢板焊接接头的组织和力学性能。
English Name:Welding and allied processes - Recommendations for joint preparation - Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels.
简体中文标题：焊接和相关工艺。接缝制备的建议。钢的手动金属电弧焊、气体保护金属电弧焊、气焊、TIG焊接和束焊。
Welding methods and technology of narrow gap quirk backing weld were discussed. Indirect quirk backing weld using manual hydrogen arc welding is considered as the best result.
讨论了窄间隙深槽打底焊焊接方法和工艺，认为用手工氩弧焊进行单面深槽打底焊效果最好。
The article discusses the automatic and manual feeding concept of the welding machine through analyzing the circuit of the wire feeding system of the CO2 arc welding machine.
通过对二氧化碳焊机送丝系统的电路分析，论述了焊机的自动送丝和手动送丝原理。
The development work done by Wuhan steel with welding material for submerged arc welding, gas yield welding and manual welding of pipeline steel with high performance is introduced.
介绍了武钢在高性能管线钢埋弧焊、气保焊及手工焊焊接材料开发方面所作的工作。
Complete functions, wide application scope, it features the functions of ordinary DC manual welding and argon arc welding.
功能多，适用范围广，具有普通直流手工焊及氩弧焊功能。
The behaviors of desulphidation during manual metal arc welding have been studied by means of experimental and theoretical analysis.
通过试验和理论分析，研究了手弧焊熔渣冶金脱硫行为。
The behaviors of desulphidation during manual metal arc welding have been studied by means of experimental and theoretical analysis.
通过试验和理论分析，研究了手弧焊熔渣冶金脱硫行为。
应用推荐