Aim To determine the measured profile of a wheel in railway vehicle. Methods So - called piecewise curve-fitting method of the third derivative continuity is employed.
目的拟合列车车轮踏面的实恻轮廓曲线，方法采用三阶导数连续的分段曲线拟合法。
For example, at CERN where the red line is measured, all the protons are included in the time profile.
比如说，当红线在CERN被测量的时候，所有的质子都被包含在了时间剖面里。
Based on the measured data of a CAM, the computer can analyze and find out the movement regularity of the CAM follower lever, thus obtaining the theoretic profile of the CAM.
提出了根据凸轮的测量数据，通过计算机分析处理，找出推杆从动件的运动规律，获得凸轮的理论轮廓曲线的方法。
Taking the straight-line-rack as the tool the error of straight generatrix is measured and by error analysis the tooth profile error and tooth orientation error can be obtained.
以刃边齿条为工具，测量廓面的直母线族误差，通过误差处理与分析获得齿廓总偏差和螺旋线总偏差。
Profile error of complex surface was common and difficult to be measured and evaluated.
复杂曲面的面轮廓度是一个应用广泛而又难于测量和评定的问题。
Mixed fractals have been measured from profile images by a digital image processing and analysis technique.
混合形已测剖面图象的数字图像处理和分析技术。
The mean counts, noise, contrast and profile curves of the slices were measured.
测量断面的平均计数、噪声、冷区对比度及剖面曲线。
Measured properties are slab position, edge profile, slab width (in multiple points) and slab edge thickness.
测量内容包括：板坯位置、边部轮廓、板坯宽度(多点测量)、板坯边缘厚度。
Method the experimental rats were given fat rich diet for 12 and 20 weeks, measured their Lee Index, insulin sensitivity and lipid profile.
方法给予实验大鼠高脂饮食喂养12及20周，并检测其肥胖评定指标，胰岛素敏感性及血脂谱。
A method of reliability testing profile design combining measured stress with reference stress is introduced.
介绍了一种将实测应力和参考应力相结合设计可靠性试验剖面的方法。
The contents of organic carbon and water of different plant processes in soil profile of NingXia GuYuan are measured and analyzed.
通过对宁夏固原不同植物过程土壤剖面有机碳含量和含水量的测定和分析。
By the means of surface profile equipment, the machined surface was measured and the statistical parameter of surface topography was calculated.
通过表面轮廓仪测量加工试件表面形貌，采用自行研制的表面形貌参数表征系统进行表面形貌统计参数计算。
The random profile graph experiment has demonstrated the waveform measured by the piezoelectric pickup that can really reproduce the profile of roughness surface.
随机轮廓图形实验，验证了压电传感器测得的波形能真实地复现表面特征的实际轮廓。
The fractal dimension was measured by means of fracture profile method (FPM).
分维的测量采用断口轮廓法(FPM)。
Some optimum fitting methods for treating the measured lift data of the symmetrical CAM profile are presented in the previous decades.
已有的配气凸轮实测升程数据的优化拟合研究基本上都是针对对称型配气凸轮展开的。
In addition, all patients had their serum lipid profile and inflammatory biomarkers measured. A list of coronary imaging parameters was also developed using intravascular ultrasound.
此外，测量所有患者的脂质轮廓和炎性标记物，用血管内超声显像一列冠脉内镜像参数。
However, to check the degree of plume lateral symmetry one profile was measured on the alternate side.
但是，检查柱侧对称的程度是衡量一个配置文件中的替代方。
The velocity profile and residence time distribution in cold model of Texacogasifier were measured.
测定了德士古气化炉的冷态速度分布和停留时间分布。
It follows from analysis that quasi - spline with arc triangle sectional profile has the advantages of easy to be machined and convenient to be measured.
通过分析证明，以圆弧三角形为截面廓形的类花键具有加工和测量方便等优点。
Curve fitting of the actual CAM profile with the Cubic-periodic spline function according to the measured data of the CAM.
根据凸轮机构的检测数据利用三次周期样条函数插值法对凸轮实际廓线进行曲线拟合。
A method is presented to quantitatively explain the sea surface temperature profile displayed on an infrared image of the meteorology satellite using actually measured parameter as external criterion.
本文提出一个利用海上实测参数作为外定标值，定量解译气象卫星红外云图中海面温度场的方法。
Adopting the engaging process of the measuring rack - probe, the error of straight generatrix is measured, and by error analysis, the tooth profile error and tooth orientation error can be obtained.
采用刃边齿条测头，测量齿轮廓面的直母线偏差，通过误差分析分离出齿廓总偏差和螺旋线总偏差。
By the use of this system pressure profile, heat flux profile and enthalpy of the jet of arc heater have been measured by various transient probes.
利用该系统各种快速探针测出了电弧加热器射流的压力剖面、热流剖面和气流焓值。
The obtained profile of spectral line has a typical and symmetrical shape of line. The line width (FWHM) was measured to be 3. 2 GHz.
获得的光谱谱线轮廓具有典型的对称性线型，测得的谱线半宽度为3.2千兆赫。
Therefore the dopant concentration profile measured by this method is a better approximation for practical carrier profile in silicon epitaxial layers.
因此，用此法测量的外延层分布是实际载流子分布的一种较好的近似。
CTOA is measured with the built three dimension function model of crack profile of the crack top and free profile through the high-speed photo technology.
CTOA的测定是通过高速摄影技术，建立裂尖裂纹断面与自由表面的三维关系模型。
Abstract: Some optimum fitting methods for treating the measured lift data of the symmetrical CAM profile are presented in the previous decades.
文摘：已有的配气凸轮实测升程数据的优化拟合研究基本上都是针对对称型配气凸轮展开的。
Sleep status was represented using sleep latency and sleep duration per night. Mood status was measured with the Profile of Mood status (POMS).
睡眠状况由睡眠潜伏期和每晚睡眠的时间来表示，情绪状态用POMS量表评定。
The design method of the system and the characteristics of its components are studied in detail. By using this system, a known free-form surface can be measured and its profile error can be assessed.
详细研究了测量系统各组成部分的特性和系统的实现方法，完成了已知自由曲面的测量和轮廓度误差评定，实现了未知自由曲面的测量和数学模型的建立。
The absolute dosimetry is determined using ionization chamber. The relative dose profile is measured by film. The test results are presented and discussed.
用电离室作辐射剂量学的绝对测量，用胶片法进行相对测量，给出了测量结果并进行了讨论。
应用推荐