I2C as systems bus and communicate bus used in measurement and control system design is introduced. Three different applications are given.
叙述了I2C总线的特点，并给出了I2C总线在工业测控系统中作为系统总线、通信总线及构成复杂系统的具体形式。
Mainly on the automatic control system for greenhouse design, on the temperature, humidity, light intensity of the principles and methods of measurement.
主要介绍了对温室大棚自动控制系统的设计。阐述了温度，湿度，光照强度的测量原理和方法。
This paper presents each component and its design method of general-purpose measurement control board for safety driving assist System.
该文介绍了研发的汽车安全辅助驾驶系统中通用测量控制模板的各部分组成和设计方法。
In this paper, digital temperature measurement and automatic control system design.
本文介绍了数字温度测量及自动控制系统的设计。
In this paper, the design and realization of parallel measurement and control system communicating with at keyboard interface are reported.
本文设计并实现了用标准AT计算机键盘接口进行数据通讯的并行测控系统。
The automatic brightness control system is another design. The design includes the average and peak area exposure measurement using FPGA.
自动亮度控制硬件系统作为设计的另一个环节，利用FPGA完成了峰值测光与区域测光的设计。
Base on the nonlinear characteristic of cold ring rolling machine's manufacturing procedure, Design the numerical real-time measurement and online control system of cold ring rolling machine.
冷辗环机数字控制系统设计针对冷辗环加工过程非线性的特点，设计了对冷辗环机加工过程实时测量和在线控制的数字控制系统。
The design of the thermodynamic environment simulation test equipment is introduced and the software and hardware structures of measurement and control system are analyzed.
介绍了热动力环境模拟试验设备的设计，并分析了测控系统硬件、软件结构。
The analog filter is the important unit of modern measurement and control system, but the traditional method has a very tedious design process.
模拟滤波器是现代测控系统中的重要部件，传统设计方法的设计过程繁琐。
It's key to design measurement and control system in order to build the studied automotive wind tunnel into the high - class wind tunnel.
要把本项研究的汽车风洞建成世界一流的风洞，关键在于测量与控制系统的设计。
This paper analyzes the application of ARM microprocessor in a gateway of embedded remote measurement and control system, elaborates on the design method about software and hardware of this gateway.
分析了ARM微处理器在嵌入式远程测控系统网关中的应用，重点阐述了网关软、硬件的设计方法。
The design method of systemic hardware circuit and the wireless communication protocol is discussed. This introduced wireless measurement and control system.
讨论了系统的硬件电路的设计方法和点到多点的无线通信协议。
In this paper, a design concept of multi-loop measurement and control system is proposed.
提出了一种多回路测控系统的设计方案。
A design of spread spectrum and ranging code in radio measurement and its control system are given in the paper.
本文给出了无线电测控系统中扩频和测距编码的设计方法。
The software includes the modeling, probe qualification, coordinates-setting, design of motion control system, path-planning of measurement and so on.
测量机的软件部分又包括测量数学模型的建立、测头的校正、坐标系的建立、测量运动的控制、测量路径的规划等等。
Compositions of the test bench were introduced; the basic design of air injection system and its transient measurement and control system to meet the test requirements were described.
文中介绍了试验台架组成，阐述了试验补气系统及满足瞬态试验要求的补气测控系统的基本设计思想。
This software has applied to a measurement control system and fits the design purpose of system.
并将该软件应用于某热控测控系统中。
The paper finished a complete intelligent software design, it makes the whole measurement system more intellectualized and realizes automatic plus control, temperature compensate, auto-collate, etc.
本论文设计了较为完善的智能化软件，使该检测系统具有较高的智能化程度，实现了自动增益控制、温度补偿、自动校准等多种智能化特性。
The design method and realization of measurement scale control system used to match material in chemical production was introduced. The configuration and LAD programming were based on the S7-300 PLC.
介绍在化工生产中加料用的计量秤控制系统的设计方法及在S7- 300PLC上进行组态、编程的实现过程。
This paper presents a way to design the intelligent temperature measurement and control system based on fuzzy self-tuning PID control algorithm.
给出了一种基于模糊自整定PID算法的智能温度测控系统的设计方法。
Absrtact: in the field of temperature monitoring and measurement system design, the traditional temperature display and control center equipment are PC.
摘要：在温度监测系统的设计工作中，传统的温度显示和设备控制中心都是在PC机上。
The typical applications of embedded technology in wind tunnel are introduced, and the design of a wind tunnel measurement and control system based on embedded technology is presented.
介绍了嵌入式技术在风洞测控系统中的典型应用，和基于嵌入式技术的风洞测控系统设计。
The measurement and control system not only gives a way to get the flight data, but also provides a design method to solve these problems when using the "system on chip" technology in the future.
本文设计提供了一种常规的解决方法，在实际工程的应用中取得了很好的效果。
The measurement and control system of 3D high-temperature& high-pressure complicated replacing physical simulator is introduced, which includes structural design and developmental mode.
本文主要介绍了高温高压复杂驱动体系三维物理模拟装置测控系统的结构设计和开发方法。
The measurement and control system of 3D high-temperature& high-pressure complicated replacing physical simulator is introduced, which includes structural design and developmental mode.
本文主要介绍了高温高压复杂驱动体系三维物理模拟装置测控系统的结构设计和开发方法。
应用推荐