Weldable materials: low carbon steel, high-strength steel, medium-carbon steel, low-alloy steel.
可焊材料：低碳钢、高强度钢、中碳钢，低合金钢。
Point out the range of carbon content of low-carbon steel, medium-carbon steel and high-carbon steel. Give some examples for their applications.
请指出低碳钢、中碳钢和高碳钢的碳含量范围，指出一些它们应用的实例。
The SkunkLock is made out of hardened medium-carbon steel that exceeds 450 brinell, and is painted in black and white stripes reminiscent of a skunk.
臭锁由硬化中碳钢制作而成，其硬度超出450布氏硬度，臭锁的黑白花纹会让人联想到臭鼬。
The change law of main elements in high-carbon or medium-carbon steel from the end of smelting to continuous casting process with LF furnace is researched.
研究了用LF炉冶炼中高碳钢的主要元素从冶炼结束到连铸过程的变化规律。
Of course I know. according to the amount of the carbon content, carbon steels can be divided into low-carbon steel, medium-carbon steel and high — carbon steel.
根据碳元素的含量，碳素钢可再分为低碳钢、中碳钢和高碳钢。
Severe plastic deforming behavior and microstructure evolution of two phases in medium-carbon steel during equal channel angular pressing (ECAP) were investigated by experimental method.
用实验方法研究了中碳钢两相组织在等通道角挤压过程中的强烈塑性变形行为和组织演化过程。
Bolts that are to be hardened by subsequent heat treatment are made from medium-carbon steel (0.35 to 0.50% c), alloyed for hardenability with elements such as chromium, manganese, and molybdenum.
螺栓是其后的热处理淬火都是用中碳钢(0.35至0.50%丙)，合金钢为如铬，锰元素的淬透性，和钼。
It generally refers to the carbon structural steel and medium carbon alloy steel.
它一般是指中碳结构钢和中碳合金结构钢。
When the shank size of a cutting tool is large enough, a more viable technique is to braze the carbide tip to a medium carbon steel shank.
当切削刀具的刀柄足够大时，当切削刀具的刀柄足够大时，可行的技术是在中碳钢刀柄上用铜焊接硬质合金刀尖。在中碳钢刀柄上用铜焊接硬质合金刀尖。
Mechanical properties of normalized Q460E could reach the requirement of some medium carbon quenched and tempered steel.
Q 460e钢正火可以达到某些中碳调质钢的力学性能要求。
The intermedium temperature microstructure of medium carbon alloy steel is upper and lower bainite.
中碳合金钢的中温转变组织只有上、下贝氏体。
The electrochemical corrosion behavior of plain carbon steel in two-phase medium with coal and water was studied with mass loss measurements and electrochemical polarization tests.
采用失重及电化学方法研究了碳钢在煤水两相介质中的腐蚀行为。
This paper researches the corrosion behaviors of low carbon steel in different media, and analyzes the corrosion behaviors of low carbon steel in the medium with corrosion inhibitor.
研究了低碳钢在不同介质中的腐蚀行为，分析了低碳钢在加入缓蚀剂的介质中的腐蚀行为。
The anticathode of polarization curve of carbon steel with SAMs by changed - electrical voltage method suggested that carbon steel is passivation state in the rust medium.
采用动电位扫描法对成膜碳钢试样测试的阳极极化曲线显示，碳钢在腐蚀介质中处于钝化状态。
Most of the steel cast into finished shapes is medium carbon cast steel.
大部分浇铸成成品形状的钢是中碳铸钢。
The high strength and high toughness hardfacing covered electrode to the medium-high carbon alloy steel surface' repair was put forward in this paper.
本文针对焊缝熔敷金属在高强时，容易开裂问题展开研究，研制了中、高碳合金钢工件表面修复的高强、高韧新型堆焊焊条。
The initiation stage and short crack behaviour in torsional fatigue of medium carbon steel was investigated by using a replication technique.
通过扭转疲劳试验和塑料复型膜技术研究了中碳钢试样的疲劳短裂纹特性。
Cutting oil for general machining of brass, bronze, aluminium and low to medium carbon steel.
低粘度油性金属切削油，适用于黄铜、青铜、铝、低到中碳钢的普通加工。
The microstructure, transformation kinetics and wear resistance of a new category of medium-high carbon bainite steel has been investigated.
对一种新型中高碳贝氏体钢的组织、转变动力学和耐磨性进行了研究。
The equations suit not only ferrite and pearlite in microalloyed medium carbon steel but also pearlite in high carbon microalloyed steel and ferrite in low carbon microalloyed steel.
该方程不仅适合微合金中碳钢的铁素体和珠光体组织，而且也适合高碳微合金钢的珠光体组织和低碳微合金钢的铁素体组织。
The cold heading steel coil generally is low and medium carbon quality steel and alloy structure steel to manufacture various standard mechanical element and fastener by cold heading forming.
冷镦钢盘条一般为低、中碳优质碳素结构钢和优质合金结构钢，用来冷镦成型制造各种机械标准件和紧固件。
Under lower and medium impact energy, the abrasive wear resistant performance of the steel metioned is higher than that of low alloyed medium carbon wear resistant steel and high manganese cast steel.
结果表明，在中、低冲击磨料磨损条件下，试验钢的耐磨性优于中碳低合金耐磨钢和高锰钢。
Medium carbon steel is much stronger than low carbon steel.
中碳钢的强度比低碳钢大得多。
Wwlding material: low carbon steel, high strength steel, medium carbon steel, low alloy steel.
可焊接材料：低碳钢、强度钢、碳钢、合金钢。
When austenitizing temperature is higher than a critical temperature, full lath martensite can be obtained in medium and high carbon steel.
钢的含碳量越高，获得全部板条马氏体的临界奥氏体温度越高。
The results showed that GCL2 was a good corrosion inhibitor to carbon steel in neutral water medium.
结果表明，改性木素磺酸盐缓蚀剂GCL2在中性水介质中，对碳钢的缓蚀性能优异。
According to the metallurgy quality requirement of medium and high-carbon steel, technological processes is designed based on the metallurgy characteristic of small tonnage converter.
根据中高碳钢的冶金质量要求，基于小吨位转炉的冶金特点，设计了其生产工艺流程。
The effect of different content of silicon to the medium carbon low-alloy steel microstructure and mechanical properties was studied under different heat treatment technology.
本文研究了不同含量的硅元素和热处理工艺对中碳低合金钢的组织与性能的影响。
The effect of different content of silicon to the medium carbon low-alloy steel microstructure and mechanical properties was studied under different heat treatment technology.
本文研究了不同含量的硅元素和热处理工艺对中碳低合金钢的组织与性能的影响。
应用推荐