The antibacterial PETPOY fiber was spun by high-speed melt-spinning method.
采用高速熔融纺丝法制备了抗菌PETPOY纤维。
The melt-spinning technology does not change the crystal structure of the alloy.
快淬工艺不改变合金的晶体结构；
The two rapid-solidification techniques employed are melt-spinning technique (MS) and Hammer-and-Anvil technique (HA).
选择的快速凝固方法为熔体旋转法（MS）和锤砧法（HA）。
Polylactic acid fiber and polyester fiber are two kinds of synthetic fibers with similar properties and both can be made by using melt-spinning method.
聚乳酸纤维与聚酯纤维都可由熔体纺丝法制得，是合成纤维中性能较为相近的两类纤维。
The mesophase pitch derived from refined coal tar Pith has a higher spinning temperature during melt-spinning, which is unfavorable to stable continuous spinning.
由煤沥青调制的中间相沥青在熔纺过程中纺丝温度较高，不利于稳定连续纺丝。
It described the spinning method including solution-spinning and melt-spinning and process of melt-spinning of polylactide and companies manufacturing polylactide fiber in the world.
介绍了聚乳酸纤维的纺丝方法、聚乳酸熔融纺丝工艺流程及目前国内外聚乳酸纤维的生产、开发情况。
The effects of molecular weight, molecular weight distribution and melt-spinning conditions of polypropylene resins on texture formation and non-uniformity of polypropylene fibers were investigated.
本文研究了聚丙烯树脂、纺丝条件等对聚丙烯纺丝过程中纤维不均匀性的影响。
The traditional manufacturing methods include powder-sintering, melt-spinning and cold-stretching, thermally induced phase separation, state track etching, non-solvent induced phase separation, etc.
微孔材料的传统制造方法有粉末烧结法、熔融拉伸法、径迹蚀刻法、非溶剂致相分离法等。
Spinning box is an important part of the melt spinning machine for synthetic fibre.
纺丝箱体是合成纤维熔融纺丝机中的一个重要部件。
Domestic spinning rotor technology need to be exploited both in the sense of melt treatment process itself and comparing with overseas advanced degassing equipments was pointed out in the end.
最后指出无论从铝合金熔体处理本身的需要，还是与国外的先进除气设备相比，国内的旋转喷吹净化技术都有待开拓。
Polypropylene is the trade name of polypropylene fiber, which is by the polymerization of propylene as raw material by the melt spinning of fibers obtained.
丙纶是聚丙烯纤维的商品名称，它是由丙烯作原料经聚合、熔体纺丝制得的纤维。
The factor affecting the production is analyzed. Melt pipe of spinning machine is also designed and machined. After the transformation, good effect is gained.
分析影响生产的不良因素，对纺丝机熔体管道进行设计及机械制造，改造后获得良好效果。
The quenching equipment, quenching technique of melt spinning and the progress on the research of computer simulation of melt spinning quenching process are introduced.
介绍了熔融纺丝的吹风冷却装置、吹风技术及熔纺冷却过程的计算机模拟研究的新进展。
The influences of formation condition and draw ratio in melt spinning on the hollowness of Circular cross section hollow polyester fiber are studied.
本文就熔融纺丝成形条件及后拉伸倍数对圆中空聚酯纤维中空度的影响进行了探讨。
It USES nanotechnology to powder of bamboo charcoal particles, the melt spinning at the carrier made of polyester, has excellent deodorizing, thermal storage, humidity and other health functions.
它利用纳米科技将竹炭颗粒微粉化后，熔融于涤纶载体纺丝而成，具有优异的消臭、蓄热、调湿等保健功能。
By using the frequency converting speed regulating system the requirements of melt spinning on electric transmission were satisfied.
采用变频调速系统可以满足熔体纺丝对电气传动的要求。
The factors such as raw melt PET , process etc. on influence of the rate of even dyeing are analyzed in direct spinning process.
分析在熔体直接纺过程中，熔体原料、工艺流程等因素对成品丝匀染率的影响；
With PP chips and antibacterial matrices blent, the antibacterial special raw material with high melt index is prepared for speed spinning.
采用聚丙烯切片、抗菌母粒共混，制成高熔融指数的抗菌高速纺专用料进行纺丝。
Introduce the way of getting additional melt filter on VC406A spinning machine. Discussions are made on the structural design, the filter medium and static mixer.
介绍了VC406 a纺丝机增添预过滤器技术改造的方法，对结构的设计、滤材的选择以及静态混合器的设置做了详细的探讨。
A model on Melt - spinning dynamics of spandex is established, and its processing is studied by the way of analogue computation.
建立了弹性纤维熔融纺丝的动力学模型，并利用计算机模拟探讨了其纺丝动力学过程。
PET-FDY was prepared by using combination equipment. The effect of chips drying condition, spinning temperature, melt pressure and cooling condition on the quality of FDY was discussed.
用嫁接设备纺制涤纶FDY，讨论了切片干燥条件，纺丝温度，熔体压力，冷却成形条件等对FDY质量的影响。
PDLLA/HA composite fibers were produced by melt spinning, and the choices of the process parameters such as temperature, revolving speed and drawing speed etc were discussed.
选用熔融纺丝法制备PDLLA／HA复合纤维，探索了熔融纺丝过程中温度、挤出机转速、拉伸速率、加料速度和冷却速率等一系列工艺参数的选择及其影响因素。
The structural characteristics of the polymer feedstock, polyurethane and polyether ester, practicable for elastic fiber melt spinning were described.
阐述了适于弹性纤维熔融纺丝的聚合物聚氨酯和聚醚酯的结构特点；
A kind of high strength and high modulus fibre was prepared by means of plasticized melt spinning of high molecular weight polyethylene (HMWPE) with wax blend and high stretch ratio.
采用石蜡增塑高相对分子质量PE后纺丝并经高倍拉伸制备高强高模纤维。
A method is presented for calculation of air resistance in melt - spinning quench duct.
介绍纺丝吹风窗的阻力计算方法。
Melt spinning involves melting the nylon in an inert atmosphere, controlling the extrusion and solidification of the melt, and collecting the extruded filaments.
熔纺包括尼龙在惰性气体中的熔化、控制熔融体挤出和固化、卷绕挤出的长丝等几个过程。
The spinning methods of Spandex are dry spinning, wet spinning, chemical reaction spinning and melt spinning. The output of dry spinning can reach 80%of Spandex total output in the world.
氨纶的纺丝方法有干纺、湿纺、化学反应纺丝和熔融纺丝法，干纺产量占世界氨纶总产量的80%。
Hard elastic polypropylene fibre samples were made by melt spinning isotactic polypropylene with melt indexer, followed by fast winding and annealing.
将聚丙烯树脂在熔融指数仪上熔融挤出、快速牵伸并退火处理，制得了硬弹性聚丙烯纤维。
Hard elastic polypropylene fibre samples were made by melt spinning isotactic polypropylene with melt indexer, followed by fast winding and annealing.
将聚丙烯树脂在熔融指数仪上熔融挤出、快速牵伸并退火处理，制得了硬弹性聚丙烯纤维。
应用推荐