Holes in parallel between the degree of error will affect the quality of the meshing gears.
孔系之间的平行度误差，会影响齿轮的啮合质量。
All actuators are electric driven. Operating Clutch and Meshing gears use DC motors and selecting gears use two electromagnets.
执行机构采用全电动执行机构，其中离合器和换挡采用直流电动机进行驱动，选挡采用电磁铁进行驱动。
Under certain conditions, this reduction of the center distance will lead to additional radial pressures between two meshing gears in the gearing.
在一定条件下，这种中心距缩减会导致互相啮合的两齿轮间产生附加径向压力。
A simple strategy for overcoming the difficulties can be developed, with a small input torque load, where one of the meshing gears can be modelled with rigid elements.
为了克服困难，一个简单的策略能够被采纳，这个策略就是在带有一个很小的输入扭矩负载下，在加载的地方其中的一个啮合齿轮的可以被建成有刚性的元件的模型。
Counter-meshing gears (CMG) mechanism is a discrimination mechanism mainly used in high consequence systems, and discrimination-teeth coding is its kernel design issue.
抗干涉齿轮集（CMG）机构是一种主要用于要害系统的密码编码与鉴别机构，齿牙编码是其设计的核心。
With the proper gears meshing in unison, the State would once again take its rightful role as a trampling juggernaut of commercial, industrial and military might.
随着适当的齿轮啮合异口同声，国家将再次考虑其应有的作用作为一个践踏势不可挡的商业，工业和军事实力。
Because when the frequency of close to the meshing of gears susceptible to the natural resonance frequency.
因为当啮合频率接近于齿轮系的固有频率时容易发生共振。
This paper presents a method of providing a virtual support for the rotor to assure the meshing stability of a pair of a pre determined spiral bevel gears in rotation.
提出一种在转子上设置虚拟支承的方法，以保证弧齿锥齿轮的啮合稳定性，并采用传递矩阵法，建立了弧齿锥齿轮-转子系统的振动模型。
Meshing spur gears must have the same diametral pitch.
互相啮合的直齿圆柱齿轮，必须具有相同的径节。
The parallel meshing of several gears under load permits a compact construction.
承载齿轮的平行啮合使行星轮系结构较紧凑。
The friction factor between two tooth surfaces of instrument gears during one meshing process is imitatively measured in this paper under the condition of ultra-low-speed.
本文在极低速情况下，模拟测定了仪表齿轮在一齿啮合过程中两齿轮齿面间摩擦系数的变化情况。
The meshing vibration and noise of a pair of gears is one of the major subjects in the field of modern gear drive.
齿轮的啮合振动和噪声是现代齿轮传动这一领域中的主要课题之一。
With the mathematic derivation it is proved that the cutter meets the specification of the gear meshing under the cutting condition and can correctly shape gears that can meet the design requirement.
通过数学推导，证明了该刀具在切削工况下符合齿轮啮合原理，可切制出满足设计要求的齿轮。
In this paper, the author applied the mathematical theory of gear meshing, developed by Nankai University, to discuss systematically the meshing theory of Involute cylindrical worm gears.
本文应用南开大学齿轮啮合理论研究组提出的“齿轮啮合的数学理论”，系统地研究了渐开线圆柱蜗杆传动的啮合原理。
Errors of modified spur gears results in meshing interference or meshing clearance at the position of mating teeth coming into or out of contact.
修形直齿轮因误差因素在齿对的啮入和啮出位置会出现啮合干涉或啮合间隙。
Then a mathematical programming procedure for loaded tooth contact analysis with friction is developed, which can solve the contact problem in the whole meshing period of hypoid gears effectively;
本文还以一对准双曲面齿轮为例，进行了整个啮合过程的承载接触分析；
This mechanism are different transmission forms when the planetary gear meshing with the two semi-internal gears.
行星轮与左右两个半内齿轮啮合时，属于不同的传动形式。
In the light of the meshing characteristics of herringbone gears, established was a model for load-bearing contact analysis of such gears.
针对人字齿轮啮合特点，建立人字齿承载接触分析的模型。
By ANSYS parametric design language, parameter modeling and mapped meshing of large scale Marine helical gears are carried out.
阐述了利用ANSYS参数化设计语言进行大型船用斜齿轮参数化建模及映射分网的方法和具体的实现过程。
This paper makes a meshing analysis about the spiroid gearing. Using the method of equivalent worm gearing, the assembly condition of Archimedes spiroid gears has been obtained.
通过锥蜗杆传动副的啮合分析，用当量圆柱蜗杆副的分析方法，得出阿基米德锥蜗杆副的装配条件。
In this paper, the difference between the linear and nonlinear vibrational solutions of gears has been studied, both in the single teeth-meshing area and the double teeth-meshing area.
本文研究了齿轮单齿啮合区和双齿啮合区非线性振动解和线性振动近似解之间的差异。
The meshing contact-impact and contact performance of spiral bevel gears has a strong impact on the whole machine performance.
螺旋锥齿轮的啮合接触冲击特性和动态接触性能的好坏严重影响其整机的工作性能。
Therefore, the variability of axle deflections and their effects on the dynamic performance in the dynamic meshing of spiral bevel gears was studied.
因此，本文还研究了动态啮合过程中轴变形的变化规律，及其对螺旋锥齿轮动态啮合性能的影响。
There are many factors causing errors of gears when machining. The main factors that would affect the accuracy of meshing movement of the gears are geometrical eccentricity and movement eccentricity.
齿轮在加工中产生的误差原因很多，其影响齿轮传递运动准确性的主要因素是几何偏心和运动偏心；
At the same time, the system vibration also made the paired gears enter into meshing in advance or and seceding of a couple of laggingly.
同时，系统振动还使啮合齿对提前或迟后进入啮合、提前或迟后退出啮合。
It is demonstrated that the meshing line between two meshing epicycloidal bevel gears is a curve of uniparted hyperboloid.
证明了摆线齿锥齿轮副的啮合线是单叶双曲面上的一条曲线。
The processing of gear hob used the meshing straight teeth and helical cylindrical gears of cutting tools.
齿轮滚刀常用的加工外啮合直齿和斜齿圆柱齿轮的刀具。
Spiral bevel gears are widely used in aviation transmission. As key components of helicopter, controlling their meshing quality is an important and difficult problem.
弧齿锥齿轮广泛用于肮空传动，作为直升机的关键零件，其啮合质量的控制是一个既重要又困难的课题。
On rotary printing presses, metal rims beside the gears on which the printing cylinder rides. The bearers make rolling contact for proper meshing of the driving gears when pressure was applied.
是轮转式印刷机上各圆筒两旁的金属边，在带动齿轮旁边，当圆筒加压转动时，它们互相接触，以确保带动轮的啮合。
Tang Jinyuan, Peng Fangjin, A Study of the Influence of Inertial Load in Dynamic Meshing Analysis of Spiral Bevel Gears, Journal of Vibration and Shock, accepted.
唐进元，彭方进，惯性载荷对螺旋锥齿轮动态啮合特性的影响研究，振动与冲击，已录用。
应用推荐