Gas metal arc welding (GMAW) is the main welding method in welding production.
熔化极气体保护焊(GMAW)是焊接生产中常用的焊接方法之一。
Fracture toughness of both shielded metal arc welding and gas metal arc welding is almost the same.
焊条电弧焊焊缝的断裂韧性与气体保护焊焊缝的断裂韧性相当。
Shielded Metal Arc Welding, Submerged-arc Welding and CO2 Arc Welding are recommended for base layer welding.
基层的焊接，推荐采用手工电弧焊、埋弧焊以及二氧化碳气体保护焊。
This study established a comprehensive approach to monitor erythemal UVR magnitude from Shield Metal Arc Welding processing.
本研究建立一完整的评估方法，监测由遮蔽金属电弧焊接产生的红斑紫外线强度。
The behaviors of desulphidation during manual metal arc welding have been studied by means of experimental and theoretical analysis.
通过试验和理论分析，研究了手弧焊熔渣冶金脱硫行为。
Welding defects such as collapse of molten pool, burning through, would like to happen in the high efficient gas shielded metal arc welding.
应用高效的气体保护熔化极电弧焊焊接铝合金薄板时，容易出现熔池下塌、烧穿等焊接缺陷。
Based on the through the arc sensing method, a method is put forward to recognize the disturbance information of gas metal arc welding (GMAW).
基于电弧传感的检测方法，提出了一种识别GMAW焊接过程干扰信息的方法。
The mixed gas metal arc welding process is used for the first time by DFEM in the discharge chamber of the hydraulic turbine exported to Syria's Tishrin.
东方电机股份有限公司首次采用混合气体熔化极气体保护焊焊接水轮机转轮室，并且在出口叙利亚的迪什林水轮机中应用。
Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition.
前言：采用焊条电弧焊工艺方法，选用C HR322堆焊焊条在Q235钢基体上以不同的焊接电流进行了堆焊试验。
The droplet transfer in the twin-wire co-pool gas-shielded metal arc welding(TCGMAW) process greatly affects the welding seam appearance and the welding quality.
双丝共熔池气体保护焊（TCGMAW）的熔滴过渡对焊缝成形以及焊接质量具有重要的影响。
Technological process of CO2 gas shielded metal arc welding with stainless flux cored wire used for stainless steel tank construction is presented in this paper.
介绍了采用不锈钢药芯焊丝CO2气体保护焊焊接不锈钢储罐的工艺过程。
Surfacing process is conducted on the substrate of steel A3 by shielded metal arc welding process using electrode CHR322 under different welding current conditions.
采用堆焊焊条CHR322，在A 3钢基体上以不同的焊接工艺进行手工电弧堆焊试验。
English Name:Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification;
简体中文标题：焊接材料。带和不带气体保护的合金钢以及细晶粒钢电弧焊用管状焊条。分类。
All carbon arc gouged surface areas shall be ground to clean bright metal prior to subsequent welding.
开始后续焊接前，所有碳弧气刨面区域应接地至洁净明亮的金属。
English Name:Welding and allied processes - Recommendations for joint preparation - Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels.
简体中文标题：焊接和相关工艺。接缝制备的建议。钢的手动金属电弧焊、气体保护金属电弧焊、气焊、TIG焊接和束焊。
This welding process joints work pieces by melting the electrode and the base metal with the heat from the electric arc between the electrode and the work piece.
它是一种利用焊条与工件之间电弧产生的热量熔化焊条和母材而将被焊工件连接起来的焊接方法。
Gaseous helium is used as an inert shielding gas in metal arc and laser welding.
在金属电弧和激光焊接中气态氦用作惰性屏蔽气体。
To reveal the influence of forced convection on gas shielded arc welding temperature field, the infrared camera was used to investigate the temperature field of the base metal in CO2 arc welding.
为了研究强制对流对气体保护焊温度场的影响，通过红外热像仪检测了CO2气体保护焊的温度场，发现在熔池及其邻近区域温度呈圆锥型分布。
Metal transfer frequency are usually taken as the criteria to evaluate the process stability of short-circuiting arc welding.
短路过渡焊接时，熔滴过渡频率通常被作为评价焊接过程稳定性及焊接质量的重要指标。
Pulse current, arc polarity, arc voltage and metal transfer of variable polarity pulse MIG welding are controlled by 80c196kc coordinately to implement the stable welding procedure.
单片机协调控制变极性脉冲MIG焊的脉冲电流及电弧极性、电弧电压及熔滴过渡频率，实现了稳定的焊接过程。
This is the submerged arc welding, a commonly used welding method that can in an hour deposit weld metal equal in weight to that of the operator himself.
这是埋弧焊，一种常用的焊接方法，它在一小时内熔敷的金属量可以等于操作者本身的重量。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc air gouging.
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
In 1966, Beijing metal structure factory developed by rotating sphere of the submerged arc welding automatic welding.
1966年，北京金属构造厂开辟出了使被焊球体扭转的埋弧主动焊。
In basis of analyzing the features of the conventional arc welding technology, a DC low-frequency plasma welding power with fusion penetration is selected as the heat source for metal forming.
本课题在分析常规弧焊技术特点的基础上，选取熔透式低频直流等离子弧焊电源作为成形的热源。
Direct metal forming based on arc welding is a novel economical rapid prototyping process.
基于弧焊的直接金属成形是一种新型的低成本快速成形技术。
Direct metal forming based on plasma arc welding is a novel rapid prototyping process.
基于等离子弧焊的直接金属成形方法是一种新型的快速成形工艺。
Direct metal forming based on plasma arc welding is a novel rapid prototyping process.
基于等离子弧焊的直接金属成形方法是一种新型的快速成形工艺。
应用推荐