A braze metal coating (56) is attached to a surface the carbide substrate (54).
钎缝金属涂层(56)被附接到碳化物基底(54)的表面。
Can be used as base metal coating materials used vinyl resin system by plastisol or solution, polyester or acrylic, etc.
可以作为金属涂布的底基材料使用的树脂系统有乙烯、聚酯或丙烯酸等。
The salt solution is to point to in the cathode can be deposited required of the metal coating the salt, used to provide a metal ions.
主盐是指镀液中能在阴极上沉积出所要求镀层金属的盐﹐用于提供金属离子。
In the activation treatment on the surface of substrate, the plating metal ions was catalyzed reduction metal coating process of formation.
在经活化处理的基体表面上，镀液中金属离子被催化还原形成金属镀层的过程。
A novel etched optical fiber temperature sensor with metal coating is presented. The working principle of this sensor is analyzed in detail.
介绍了一种新型的金属敷层刻纹光纤温度传感器模型，并对其测温原理进行了研究。
The zinc plating could be used as bottom of chemical nickel plating and could deposit other protecting decorating metal coating layer on it.
所得锌镀层可 以作为化学镀镍的底层，也可以在其上沉积其它防护装饰性金属镀层。
This has been found to be necessary to compensate for the difference in thermal expansion between the metal coating and the plastics substrate.
人们发现，这对补偿金属镀层和和塑料基体间的热膨胀差很有必要。
The variation of concentration of main salt in electrolyte affects the quality of metal coating obviously, and it is for alloy plating coating as well.
在电镀过程中，镀液主盐离子浓度的变化对镀层的影响极大，对合金电镀更是如此。
In addition, the flat metal coating will not be scratched with the probe, so that the conducting plate has long service life and good experiment effect.
另外，金属镀膜平整度好，且不会被探针划伤，因此，导电板的使用寿命长，实验效果好。
The thickness of the metal coating 11 is preferably substantially smaller, if them are at all present at the flat sides 5, 6, than at the narrow side 8.
只要金属覆层(11)主要存在于扁平面(5、6)上，其厚度就最好明显低于窄面(8)上的覆层厚度。
In mechanical products using electrolysis deposited on attachment good, but the performance and substrate material of different metal coating technology.
利用电解作用在机械制品上沉积出附着良好的、但性能和基体材料不同的金属覆层的技术。
Apply paint or other materials, such as stains, lacquer, enamel, oil, varnish, fibreglass, metal coating or fire retardant using brushes, rollers or spray equipment.
使用刷子，滚筒或喷涂设备，涂抹颜料或其他材料，如污渍，漆器，珐琅，油，清漆，玻璃纤维，金属涂层或阻燃性。
When the metal coating is punctured or scratched, the capsules in the damaged area burst and ooze restorative liquids, in the form of compounds called trivalent chromates.
当金属的覆盖层受到扎刺或划损时，受损区域的胶囊将会破裂并渗出具有恢复性的液体- - -三价铬钝化化合物。
The metal coating film formed over the entire surface of the electrically non-conductive particle can impart electrical conductivity to the electrically non-conductive particle.
该导电性粒子通过在非导电性粒子的整个表面上形成的金属薄膜而被赋予导电性。
The pore distribution of metal coating activated carbon fibers were analyzed by HK, BJH and Dubinin theories from the nitrogen adsorption isotherms measured by auto adsorption meter.
采用吸附仪测定了所制负载金属活性碳纤维的吸附等温线，然后用不同理论方法对孔径分布进行表征分析。
JMBF also had high turbidity and COD removal ratio when treating petrochemical plant wastewater, mud river water, metal coating waste water, canny wastewater and domestic wastewater.
对石化厂废水，含泥河水，喷漆废水，罐头厂废水，生活污水的浊度与COD的去除率均较高。
With the above technology applied to wire production line, the pre-coating wire with excellent corrosion-resistance can be made and the metal coating efficiency can be raised greatly.
把此过程应用于卷材生产线上，就可以得到防腐性能非常优异的预涂卷材，同时能大大提高金属涂覆的效率。
We present a method for metal coating optical fiber and in-fiber Bragg grating. The technology process which is based on electroless plating and electroplating method is described in detail.
提出了一种对光纤和光纤光栅进行金属化保护的方法，该方法基于化学镀-电镀技术。
A metal-polymer coating can heal its own scratches by liquefying when exposed to UV and then resolidifying.
一种金属聚合物的涂层能够在有紫外线照射的情况下液化，从而修复表面的划痕，一旦不再照射，就重新固化了。
Dr Reisfeld's team do this by coating the glass with a combination of dyes and sprinkling it with nanoparticles of a metal whose nature they are not yet willing to disclose.
Reisfeld博士的小组是在玻璃板上涂盖一层混合染料并喷洒一种金属纳米粒来实验此法，他们至今不愿透漏这种金属。
Melosh's group figured out that by coating a piece of semiconducting material with a thin layer of the metal cesium, it made the material able to use both light and heat to generate electricity.
Melosh的研究小组发现用薄层的金属铯覆盖在一片半导体材料上，能够使材料同时利用光和热能来产生电力。
Sand or grind metal surfaces to prepare for coating, and paint metal surfaces using electrostatic method, spray gun or other painting equipment.
用砂纸打磨或研磨金属表面，准备涂层，并采用静电方法，喷枪或其他涂装设备，漆刷金属表面。
Excellent binding force between coating and metal base.
优异的涂层与金属基体的结合力。
Conventional CVD coating process requires a metal compound that will volatilize at a fairly low temperature and decompose to a metal when it contacts with the substrate at higher temperature.
常规的化学蒸发沉淀涂层工艺需要一种容易在相当低温度下挥发并且在较高温度下与基体接触时能分解成纯金属的金属化合物。
The insulating property of coating influences the scopes and lives of metal cores, and has an important effect on the quality of casting.
涂料隔热性能的优劣不仅影响金属型芯的使用寿命及范围，而且对铸件质量有着重要的影响。
The test probe is also applied through openings in earthed metal enclosures having a nonconductive coating such as enamel or lacquer.
试验探棒还需穿过在表面覆盖一层非导电涂层如瓷釉或清漆的接地金属外壳的开口。
Coating for metal, wood and plastic.
金属，木器，塑胶等之涂装。
In some cases, if the salt solution of the metal ion content for simple ion, the coating, therefore, coarse grains to adopt complexation ion of plating solution.
有些情况下﹐若镀液中主盐的金属离子为简单离子时﹐则镀层晶粒粗大﹐因此﹐要采用络合离子的镀液。
In some cases, if the salt solution of the metal ion content for simple ion, the coating, therefore, coarse grains to adopt complexation ion of plating solution.
有些情况下﹐若镀液中主盐的金属离子为简单离子时﹐则镀层晶粒粗大﹐因此﹐要采用络合离子的镀液。
应用推荐