In this paper, a method of curve fitting with asymptotic line is proposed for reducing the error of extrapolation value.
本文提出一种降低拟合曲线外推偏差的方法——渐近线辅助拟合法。
This paper proposes a new method of curve fitting based on cloud transform. Some experiments validate the proposed method.
提出了一种基于云变换的曲线拟合新方法，取得了良好的实验效果，证明了基于云变换曲线拟合方法的有效性。
The method of curve fitting and searching the maximum value of subtraction results was put forward to determine the size of structural elements.
在结构元尺寸的确定方面，提出了线灰度分布曲线拟合并相减，再搜索相减结果最大值的方法。
Finally adopts the method of curve fitting to do the logarithmic spiral fitting, and then do a comparative analysis with the standard components after fitting the curve.
最后采用曲线拟合的方法进行对数螺旋线拟合，拟合出曲线后，与标准零件进行比较分析。
By using the method of curve fitting to calculate the traction tonnage, we can gain the traction tonnage within short time and short distance after the locomotive start.
对牵引吨位的计算，采用了曲线拟合的计算方法，能够在列车起动最短的时间、运行最短的距离内计算出牵引吨位。
On the basis of Chebyshev curve fitting method, a new method to design worn profile tread is proposed by this paper.
本文在切比雪夫曲线拟合方法的基础上，提出了一种高次曲线磨耗形踏面的设计方法。
In this paper, a general method for meta-graph recognition is proposed based on curve fitting and separation of line and smooth curve.
本文针对图纸矢量化中的图元识别技术，提出了系统的基于线弧分离和拟合识别方法。
This article introduces the MATLAB curve fitting toolbox, and provides a special application method through the test data processing of Automobile surface modeling.
介绍了MATLAB曲线拟合工具箱，并通过汽车覆盖件的曲面造型测试数据的处理，给出了具体的应用方法；
Conclusion the polynomial fitting curve is the perfect linear evaluation method. It guarantees both the accuracy and reliability of the experimental results, and is more suitable to clinic.
结论多项式拟合曲线是较为理想的线性评价方法，既保证了实验结果的准确性、可靠性，而且更适用于临床。
Moreover, this paper puts forward an adaptive method of control valve based on open-loop and enhances measure accuracy through curve fitting method.
同时，本文提出一种基于开环的阀门开度自适应控制方法，通过在线曲线拟合的方法提高阀门控制的精度。
Represents a new kind of generalized extended interpolation method to realize the high precision fitting of characteristic curve of fan.
提出采用一种新的广义延拓逼近法，来实现煤矿通风机高精度特性曲线的拟合。
Based on the dispersion equations, 'Downhill Simplex' method is utilized to measure the thickness and optical constants of thin film by fitting the curve of measured transmission spectrum.
借助于不同的色散公式，运用单纯形法拟合测得的透过率光谱曲线，从而获得薄膜的光学常数和厚度。
By using curve fitting theory, proposed a new method of power quality detection.
根据曲线拟合的概念，提出了一种新的电能质量检测的去噪算法。
Based on the idea of curve fitting this paper proposes a new method for calculating the balancer in partial inertia force balancing of planar linkage mechanisms.
本文根据曲线拟合的思想提出了一种解决平面杆机构惯性力部分平衡配重计算的新方法。
Analog regression method is suggested in this paper based on the theory of digital analogy in order to solve the curve fitting of the pipe cost.
本文基于数值模拟原理，运用模拟相关分析方法解决了管线造价的曲线拟合问题。
A speedy match of angular distance method was formulated by curve fitting the table of star pair for realizing rapid match in star pair information catalogue.
为了实现对星对信息表的快速查找，提出了一种将星对信息表拟合成曲线函数实现快速角距匹配的方法。
Methods the measurable range was broadened through: Lowering of the specific radioactivity of the labelled antigen, increasing the concentration of the anti-serum and improve the curve fitting method.
方法：通过降低标记抗原的比放射性，提高抗血清的浓度，改进曲线拟合方式等方法，扩大测定范围。
Both the wavelet functions and the least square algorithm of fitting of data are used to construct a new method of fitting of curve and surface.
本文把小波函数引入离散数据拟合领域，将小波函数与数据拟合的常用方法——最小二乘法相结合，给出了一种新型的数据拟合工具。
Consequently, with the use of curve fitting method, the inversion of all seismic lithologic parameters can be easy achieved, and zero-offset section can be obtained.
所以利用曲线拟合方法很容易实现全部地震岩性参数的反演，并可提取零偏移距剖面。
In this dissertation fitting method is used in forming the basic magnetization curve of the iron core.
本文对铁心的基本磁化曲线采用了拟合的方法。
The paper, through analyzing the forming of the amplitude spectrum of the echo, proposed a new method using quadratic curve fitting for it.
本文针对这种情况，对连续波雷达回波频谱幅度产生原因进行分析，提出了二次曲线拟合频谱幅度来估计加速度的方法。
On the basis of short straight-line fitting, this dissertation USES the least-square method of curve matching to discern circle and straight line.
通过对离散点进行短线段拟合的基础上，再利用曲线拟合的最小二乘法对圆和直线进行二次拟合。
Then, using curve fitting and optimization method, the linear model, hysteresis model and variable linear model of pressure-torque relations are developed based on test data.
其次，在获得大量试验数据的基础上，运用曲线拟合和优化技术，建立制动压力-力矩关系的线性模型、迟滞模型和可变线性模型。
A practical method for curve fitting of test data-Progressive search and sectional regression-is presented.
文中提出了一种试验数据曲线拟合的实用方法——逐步搜索分段回归法。
Both the rational functions and the least square algorithm of fitting of data are used to construct a new method of fitting of curve and surface.
把有理函数引入离散数据拟合方法中，将有理函数与数据拟合的常用方法——最小二乘法相结合，给出了一种新型的数据拟合工具。
The method of using cubic spline function as fan characteristic curve fitting is introduced.
介绍了用三次样条函数作通风机性能曲线拟合的方法。
The method of using cubic spline function as fan characteristic curve fitting is introduced. The calculating example is provided and description is made for the specific problem.
介绍了用三次样条函数作通风机性能曲线拟合的方法。列出了计算实例，并对具体问题做了说明。
The method of using cubic spline function as fan characteristic curve fitting is introduced. The calculating example is provided and description is made for the specific problem.
介绍了用三次样条函数作通风机性能曲线拟合的方法。列出了计算实例，并对具体问题做了说明。
应用推荐