The reaction of molar ratio of pentamer to pyridine and products structure is studied.
由此研究了五聚体与吡啶的摩尔比与产物的结构的关系。
Objective: To identify the components of polysaccharides from Calvatia gigantea and their molar ratio.
目的：研究马勃多糖的单糖组成及其物质的量之比。
The effect of molar ratio of reactants and reactive temperature on the yield of product is investigated.
考察了反应物投料摩尔比和反应温度对产物收率的影响。
The influence of active metal component, its molar ratio and molecular sieve component was investigated.
考察了活性金属组分、摩尔比、分子筛组分等因素对催化剂性能的影响。
Then the effect of monomer molar ratio, reaction temperature and catalyst on the synthesis of LCP is studied.
探讨了单体摩尔比、反应温度、催化剂等因素对液晶合成的影响。
In this paper, p-methylphenyl sulphonylamine was used to modify urea formaldehyde resin with low molar ratio.
用对甲基苯磺酰胺改性低克分子比的脲醛树脂。
The influence of reaction time, temperature, pressure, and molar ratio of methanol to soybean oil were discussed.
讨论了不同的反应时间、温度、压力及摩尔比对大豆油转化率的影响。
Investigated molar ratio, reaction temperature and reaction time on the reaction, the optimal process conditions.
考察了物料摩尔配比、反应温度和反应时间对反应的影响，得到了最佳工艺条件。
The composition and stable constant were measured by equimolar continuous change method and the molar ratio method.
用等摩尔法和连续变化法测定了缔合物的组成和稳定常数。
The effects of reactant molar ratio, catalyst consumption, temperature and reaction time on the reaction were discussed.
考察了反应物摩尔比、催化剂用量、反应温度和反应时间对反应的影响。
The influences of temperature, time, catalyst and the molar ratio of raw materials on the yield of the product were studied.
通过实验考察了反应温度、催化剂用量、反应时间及物料配比等因素对反应的影响。
After single factor optimization, temperature, catalyst amount and molar ratio of methanol to oil were the important factors.
在单因素优化的基础上，确定反应温度、催化剂用量及醇油摩尔比等为显著影响因素。
The influence of temperature, reaction time, catalyst and the molar ratio of raw materials on the yield of the product were studied.
通过实验，考查了催化剂用量、反应时间、反应温度及物料配比对反应的影响。
The effect of molar ratio of monomers, swelling temperature and time, reaction time and pressure on the grafting density are discussed.
探讨了双组分单体的摩尔比，溶胀温度和时间，反应压力和时间等对接枝率的影响。
Thirdly, the relationships between electric conductivities of potassium chloride solutions and temperature and molar ratio are studied.
三是研究了氯化钾溶液的电导率随温度和浓度变化的关系。
Polymerization conditions, including molar ratio of aniline to APS, temperature of the reaction system and reaction time, were discussed.
讨论了单体与氧化剂的比例、反应体系的温度以及聚合反应的时间对聚合产物的影响。
The effect of molar ratio of ethylene glycol monomethyl ether and glacial acetic acid and catalyst dosage on esterification are discussed.
考察了乙二醇单甲醚和冰乙酸摩尔比及催化剂用量对酯化率的影响。
The effect of boron to silica molar ratio, basicity, alkali cations, seeds, aging and reaction time on the crystallization was investigated.
考察了凝胶硅硼比、碱度、碱金属离子、添加晶种、老化时间和晶化时间对晶化产物的影响。
Factors of influence such as solvent type and amount, molar ratio of raw materials, reaction temperature, time and pressure are investigated.
考察了溶剂、原料配比、反应温度、时间和压力等因素对产率的影响。
The shaped particles comprise estradiol compounded in a 1:1 molar ratio with cholesterol, and are administered in combination with progesterone.
这些成形颗粒包含按摩尔比为1∶1与胆固醇组合的雌二醇，并与孕酮联合给药。
The results show that the influences of solvent, reaction time, and molar ratio of styrene to catalyst or TBHP on the reaction is very important.
研究结果表明，反应温度、反应时间、溶剂种类、氧源用量和催化剂用量等反应条件对苯乙烯环氧化反应具有重要影响。
Many synthesis parameters were investigated such as amount of catalyst, reaction time, molar ratio of alcohol to acid and different water carriers.
考察了催化剂用量、醇酸物质的量比、带水剂种类、反应时间等因素对收率的影响。
The influence of the molar ratio of n-amyl alcohol and acetic acid, the quantity of the catalyst, the reaction time etc on the ester yield was discussed.
探讨了醇酸物质的量比、催化剂用量、反应时间等因素对酯收率的影响。
And the arrangement mode of dyestuff for LDH is related to the component and structure of dyestuff, as well as the reaction molar ratio of dyestuff and LDH.
同时染料在LDH层间的排布模式，与染料本身的组成和结构以及染料和LDH反应的摩尔比有关。
The curing reaction process of bamboo liquefaction phenolic resin with different molar ratio was studied by non-isothermal differential scanning calorimetry(DSC).
采用非等温差示热量扫描DSC曲线方法探讨了竹材液化物酚醛树脂胶不同物质的量之比时的固化反应过程。
The influence such as molar ratio of salicylic acid to isobutyl alcohol, amount of catalyst, and reaction time on the yield of isobutyl salicylate were discussed.
研究了催化剂用量、酸醇物质的量比以及反应时间等因素对产品酯化率的影响。
The effects of reaction temperature, space velocity, molar ratio of water to methanol, and reaction time on the performance of the micro reactor were investigated.
试验研究分析了反应温度、进料速度、水醇比（水和甲醇的物质的量的比）、反应时间对甲醇水蒸气重整制氢微型反应器性能的影响。
The result shows that such factors as molar ratio of ammonia and CO2, concentration of hydrous ammonia, resident time and gas temperature influence CO2 absorption.
实验结果表明，氨与CO2的摩尔比、氨水浓度、停留时间和烟气温度等因素影响CO2吸收效率。
In condensation polymerization, the monomer will affect the purity of the molar ratio of functional groups, so that the molecular weight deviates from the set value.
在缩合聚合中，单体的纯度会影响到官能团的摩尔比，从而使聚合物的分子量偏离设定值。
In condensation polymerization, the monomer will affect the purity of the molar ratio of functional groups, so that the molecular weight deviates from the set value.
在缩合聚合中，单体的纯度会影响到官能团的摩尔比，从而使聚合物的分子量偏离设定值。
应用推荐