Mold base to be minimum hardness of165 BHN.
模座的最低硬度为165布氏硬度。
Mold base to be minimum hardness of 165 BHN.
模座的最低硬度为165布氏硬度。
An example of mold base assembly was studied to prove the method.
最后以模架的装配为例说明了实现这种方法的过程。
The mold cavity was obtained by splitting mold base in parting surface.
模具型腔可采用分型面分割模板的方法获取。
In this paper, a method of computer-aided-selection of mold base will be discussed.
本文将探讨通过计算机辅助选择模具模座的方法。
In 1997 to introduce a rough device, the client's mold base and the optical plate processing.
于1997年引进一套粗加工设备,为客户进行模座及光板加工。
Many common parts and common mold base parts are used while the designer are designing powder metallurgy die.
在进行粉末冶金模具设计时经常会用到大量的通用零件和通用模架。
To ensure the degree of processing die's hole circle, it is also designed into a stable, high accurate self-centering mold base, thereby improving the dies quality.
确保加工模具孔形的真圆度,该机又设计了稳定、高精度自定心的模座,从而提高模具的品质。
In order to select a suitable mold base for given articles, a calculation of checking method is used. And a principle of the similitude design is used to devise an off-standard mold base.
本论文采用校核式计算方法实现标准模架的自动选择,并应用相似设计原理进行了非标准模架设计;
Use the jar as a mold and wrap the newspaper around the jar, then fold the tails into the base.
把罐子当作模具,将报纸包裹在其外面,然后将多于的部分叠进底部。
Tool track creation method is the base and key of mold high-speed milling NC program.
刀具轨迹生成方法是模具高速加工数控编程的基础和关键。
A mold technologic analysis system base on agent theory is developed. This agent is a part of the mold workflow management system.
构建的基于代理机制的模具工艺分析系统是模具工作流管理系统的一个组成部分。
This paper describes the technological process and the result of the application of carbon ethanol-base coating on self-hardening resin sand mold.
本文介绍碳素醇基涂料在冷硬树脂砂铸铁件上应用的配方、配制工艺及使用效果。
In this paper the effects of pouring temperature, mold temperature, inoculants, and section size on the microstructure and mechanical properties of casting nickel-base superalloy K24 were studied.
本文研究了浇铸温度、铸型温度、孕育剂和截面尺寸对K 24镍基铸造高温合金的组织和性能的影响。
The mathematical model which describes the flow and heat transfer in inverse solidifying mold was established. Base on the model, a series of study with computerized simulation was taken.
建立了描述反向凝固结晶器中流动与传热的数学模型,并在此模型基础上进行了计算机模拟和仿真。
After studying on the molding technology, this paper designs a mould of bearing base and a mold for prepress of CP- DMC.
在此基础上,设计制作了托辊轴承座双腔模具及CP-DMC模压料预压模具。
According to GT principle, a set of coding system for injection mold is built on the base of injection mold structure feature and function analysis by sorting out the classification mark.
本文运用成组技术原理,在对注塑模具零件结构特点和功能分析的基础上,对注塑模具零件的结构与工艺特征的分类标志进行总结,制定了一套适用于注塑模具零件的分类编码系统。
Base on the mold matching recognition we present a new method of recognizing the number plate.
本文在模板匹配法的基础上,根据汽车牌照本身的特性,提出了特征点匹配识别的方法。
On the base of defining a side hole and an inclined hole in plastic structure, both are compared on the hand of mold design.
在对塑料制件结构中的侧孔和斜孔加以界定的基础上,从模具设计角度对两者进行了比较。
Take the base assembly of the new relay as an example, introduce an injection mold with original diagonal handspike and insert.
以某新品继电器的底座部分为例,介绍了一种新颖的斜推杆式嵌件注射模。
A design method of hot runner mold for PET bottle base was proposed to extend the temperature range of PET resin for better processing.
为解决PET塑料加工温度范围较窄,工艺性较差的问题,提出了PET吹塑瓶坯热流道模具设计方法。
Linyi is located in west Shandong, Lunan, the largest in Northern Jiangsu plastic mold production base.
地处山东临沂城西,是鲁南、苏北地区最大的塑料模具生产基地。
This results could be provided base for improvement of Gray Mold resistant breeding in Tomato.
该结果为开展番茄灰霉病抗性分子标记辅助选择提供依据。
The utility model relates to a universal winding mold frame which is used to produce motor solenoid with changeable sizes and forms, including support columns, sliding panels and a base.
本实用新型涉及制作电机线包的一种可任意变化大小及形状的万能绕线模具框。
Installation base: Injection of plastics from a complete mold, mounting panel strongly connected to the joint.
固定底座:模具注塑一体成型,牢度强,不脱底。
The anti-mold method comprises the following steps of: (1) subjecting a base layer to anti-mold treatment using the anti-mold cleaning solution;
所述防霉方法包括如下步骤:(1)用所述防霉洗液对基层进行防霉处理;
The anti-mold method comprises the following steps of: (1) subjecting a base layer to anti-mold treatment using the anti-mold cleaning solution;
所述防霉方法包括如下步骤:(1)用所述防霉洗液对基层进行防霉处理;
应用推荐