This paper introduced the electronic clock back of the injection mold design process.
本论文介绍了电子钟后盖的注射模设计过程。
System is validated with plastic mold design process, the result is satisfactory and the innovation and practicability is validated.
在此基础上结合塑料模具开发过程和注塑模具标准件对原型系统进行了验证，取得了良好的效果。
This paper introduced the manufacturing process of bore bit warm extrusion technology, main technological parameter and mold design process.
绍了钎头温挤成型工艺的研制过程、主要工艺参数的确定及模具设计过程。
During the mold design process, the conflicts would appear, because the inter-influenced and restrained teams hold different consideration aspects, evaluation criterions, and domain knowledge.
在注射模协同设计过程中，由于各协同小组对设计的考虑角度、评价标准和领域知识不尽相同，从而会导致设计冲突。
This article detailed introduction of the mold design of the whole process.
因此本文详细的介绍了模具设计的整个过程。
Knowledge of ceramic or plastic injection molding process, equipment and mold design is a must.
必须具备陶瓷或者塑料成型工艺、设备和模具的设计知识。
The liquid-position sensor working principle of brake-used oil tank, structural design of floater products, mold design, foam material as well as foam forming process are introduced.
介绍了刹车油箱液位传感器工作原理、浮子产品结构设计、模具设计、发泡材料用料、发泡成型工艺等方面内容。
By analyzing the structure process of fridge top frame, the mold structural design and working process are introduced.
通过对电冰箱顶框的结构工艺分析，介绍了该模具的结构设计和工作过程。
Introduced design and manufacture methods of injection mold of injection nozzles for plastic buckets, described the mold working process.
介绍了注胶桶的注胶嘴注射模的设计制造方法，并阐述了该模具的工作过程。
An integration system is set up to meet the need for information integration in the process of mold design and manufacture and detection of aero-engine turbo blade by investment casting.
为满足航空发动机涡轮叶片精铸模具设计、制造、叶片铸件检测流程对信息集成的需求，提出构建精铸模具集成设计系统平台。
Familiar with raw material selection, mold design, molding process.
熟悉原材料选择，模具设计，注塑工艺。
Design and manufacture methods of injection mold for the defecator body were introduced, and working process of mold was stated.
介绍了清净管体注射模的设计与制造方法，并阐述了模具的工作过程。
According to the structural characteristics of earphone bracket, the design process of its mold is introduced.
根据耳机支架塑件的结构特点，介绍了其模具的设计过程。
It is difficult to meet the requirement of molding high precision optics plastic lens because the experience play an important role in the traditional plastic mold design and molding process.
传统的塑料模具设计及注射成型工艺参数对经验的依赖性较强，难以满足高精度光学塑料元件的成型需求。
Through analyzed the molding process of the the split air-condition wind-casing, introduced in detail the injection mold structure design, mold design thought and mold design point.
通过对分体空调器出风框的工艺分析，详细介绍了出风框的塑料注射模结构设计，以及设计思路与设计要点。
The technological characteristics of the plastic parts with thin shell were analyzed. the design of the injection mold structure was introduced. and the working process of the mold was stated.
分析了薄壳类塑料产品的工艺特点，介绍了该类产品注射模的结构设计，并说明了该模具的工作过程。
The subject is about the design of Aluminum shell mold and process analysis.
本课题是对铝壳体进行模具设计并分析加工工艺。
Introduce all sorts of techniques and their features of powder moulding, and present the design process of a powder moulding mold, and mold stuff, and give an application instance.
介绍粉末各种成型工艺及其特点，同时介绍了粉末成型模具的设计过程，以及模具材料，并例举了应用实例。
In the die design, the use of spherical punch made the process of deep drawing and reverse redrawing achieved in one set of mold and common hydraulic press.
在进行模具设计时，采用半球形凸模等方式可以实现正、反拉深在一套模具，普通液压机上完成加工。
An example shows that the new mode will play an important role on increasing efficiency of computation and design and manufacturing facilities, and quickening process of mold development.
初步运行实例表明，基于网格技术的模具协同设计制造模式对于提高设备资源及其计算能力的利用效率，加快模具开发进程有重要作用。
The design and manufacture method of spring pressed cover injection mold are introduced, and the working process of this mold is stated.
介绍了弹簧压盖注射模具的设计与制造方法，并阐述了该模具的工作过程。
The design of its molding part was used in the mold, inject system and other make up, and working process of the mould are specified in detail.
详细地叙述了模具成形零件的设计、液压侧抽芯机构、浇注系统和其他结构的设计过程，以及模具工作过程。
The design thinking of multi-cavity mold for the rubber dust cover, taking off and working process are introduced.
介绍了橡胶防尘罩多腔模具设计思路、产品取出及操作过程。
Process of mold design for plastic rotating blade was introduced.
介绍了转叶塑件模具设计的过程。
Moulding technology of specular seat is analyzed and the injection mold of this plastic part gets designed furthermore working process and key points of die design and manufacture are provided.
分析了镜座的成型工艺，设计了该塑件的注射模，并介绍了该模具的工作过程和模具的设计与制造要点。
The mold optimal design process of protecting anti-plug linker are analyzed in detail, and the effect of mold structure to insulated parts molding quality are analyzed as well.
对防反插电联接器模具优化设计过程进行了详细的分析，剖析了模具结构对绝缘件成型质量的影响。
The importance of applying the thoughts of parallel engineering to design and manufacturing of tyre molds is discussed, and the mold design and development process described.
文章阐述了将并行工程思想引入轮胎模具设计与制造过程的意义，论述了基于并行工程过程管理技术的轮胎模具设计开发过程。
The article introduces the powder metallurgy mold design and size count of forming spares, besides, it analyse working process of miniature cylinder forming mold.
文章重点介绍了微型气缸的粉末冶金成形模的设计以及成形零件相关尺寸的计算方法，同时对微型气缸成形模的工作过程进行了分析。
Based on determining of mold joint, the thesis finished the structure optimization design of chill, and introduced the process of optimization in detail.
在分型面确定的基础上，完成了凸轮轴铸件相应冷铁的结构优化设计，并详细的介绍了其优化过程。
Developing many products of OTR, include agriculture truck tires: design the mold structure of the product, trace the process of product until manufacture.
开发过许多工程胎产品，包括农业和卡车轮胎：设计模具和产品结构，跟进产品投入生产前的过程。
应用推荐