After the completion of the molded part is called standard mold design, 3d design to achieve a whole deputy mold.
完成成型零件的设计后调用标准模架，实现了整副模具的3d设计。
For larger molded parts, material typically represents more than 50% of the part cost for a refrigerator crisper tray.
对冰箱蔬果盘之类的大零件而言，材料往往占成本50%以上。
The strain change caused by performing punching to the resin molded part on the surface of the molded part is measured.
对因对树脂成形品打孔产生的、成形品表面的应变变化进行测定。
A complicated model for an injection molded part may have a thousand features, and modifying an early feature may cause later features to fail.
为一个注模零件制作的复杂模型可能包含上千个特征，修改早先建立的特征可能导致后续特征创建失败。
Based on the variation of temperature in injection molded parts, the simulation of cooling takes consideration of the cooling stage of the part after ejection.
以注塑制品的温度变化为对象，考虑了注塑制品出模后的冷却过程。
This paper discusses the three factors that affect the deformation of injection molded parts:simple nonuniform shrinkage, part cooling and molecular orientation.
本文分析了注塑成型过程中简单收缩、冷却、 分子取向等因素对注塑件变形的影响。
The temperature, injection speed, injectionjectio n pressure, and holding pres sure of the injection molding process should be controlled to achieve high quality of injection molded part.
温度、注射速度、注射压力和注射成型过程的保压压力是获得较高制品质量的重要影响因素。
Mold parting direction is an important factor to verify the moldability of a molded part and its determination is the first step to achieve automatic design of injection mold or casting die.
判定脱模方向是实现模具自动设计的第一步，也是评估塑件或浇注件能否模具成型的重要因素。
Researchers are seeking to define the proper water temperature, pressure, and flow rate, as well as the effect of internal water quenching on resin crystallization and molded part properties.
研究人员正在试图确定水温、流量、零件腔内水的冷却作用对树脂结晶和注射件性能的影响。
The key was a plastic "ribcage," a complex molded plastic part that pushed the limits of injection-molding tooling technology.
其中的关键是一种塑料特征“筋墙”，这是一种比较复杂的注塑塑料零件，达到注塑技术的极限。
Molded into the melted resin from the gate, into the flow channel module slot part of the composition of the product.
成形品是由流入融化树脂的浇口、导入模槽的流道与产品部份所构成。
CM3 molded case circuit breaker (MCCB) with thermal overload alarm but non-release function was introduced. It integrates part function of thermal overload relay and function of MCCB.
介绍了一种具有热过载报警不脱扣功能的CM 3塑料外壳式断路器，其将热过载继电器的部分功能与MCCB的功能有机地结合在一起。
Recently, I worked on a project that converted an aluminum die cast part to one injection molded from highly reinforced thermoplastic polyester.
近来，我在一个项目上工作，这个项目是一个使用高度增强的热塑性塑料注塑制件替换一个铝质压筑制件。
This paper introduces the experimental studies on the warpage of injection molded strip parts in the design of part structure and mold gate and the selecting of molding conditions and materials.
从制品结构和模具浇口设计、原材料和成型条件的优选诸方面对长条形注塑件翘曲变形进行了系统的试验研究。
The experimental part design of rotationally molded truck fender was studied by combining theory analysis, experimental part design and experiment.
采用理论分析、试验制品设计与实验结合的研究方法，研究卡车翼子板旋转模塑成型试验制品设计问题。
For rotational molded truck fender, raw material, processing conditions and the design of part and mold were studied.
对卡车翼子板滚塑成型原料、工艺条件、制件和模具设计进行了研究。
The arrangement of the ribs has important effects on the rigidity of molded plastic part too.
加强筋的布置对注塑件的刚度也有重要影响。
Wall tile, square, molded, black and gray, raised line decoration, geometric design including flowers, acanthus leaves, and diamonds, part of a larger design.
墙砖，正方形，浇铸，黑色、灰色、浮雕装饰，几何设计，包括花朵，叶形的装饰板，菱形，大的设计图局部。
For on-line installations, scanners can be mounted on a carriage as part of a linear-motion system, registering measurements across sheets, film ribbon, molded test samples, or finished parts.
为上线装置，扫描器，可以安装在一个车厢的一个组成部分直线运动系统，测量，登记全国床单，电影丝带，浇铸试验样品，或成品零件。
An over-molded thick wall part, an insert used in forming the over-molded thick wall part, and a method of forming over-molded thick wall parts.
本发明涉及重叠注塑的厚壁部件，用于形成重叠注塑的厚壁部件的嵌件，以及形成重叠注塑的厚壁部件的方法。
Changing the wall thickness can have a profound effect on the warpage, depending on the part geometry and the material being molded.
根据零件特征和填充的材料，零件壁厚对翘曲有很重大的影响。
Changing the wall thickness can have a profound effect on the warpage, depending on the part geometry and the material being molded.
根据零件特征和填充的材料，零件壁厚对翘曲有很重大的影响。
应用推荐