Position control algorithm study of Permanent magnet linear motor servo unit;
永磁直线电机伺服单元位置控制算法的研究；
In the machining process stepping motor servo system is an important servo system.
在加工过程中，步进电机伺服系统是一种重要的伺服系统。
In this paper, a DC brushless motor servo-control system based on DSP is designed.
本文设计了一种基于DSP的直流无刷电动机伺服控制系统。
This paper presented L2 robust control for permanent magnet linear motor servo system.
对永磁直线电机伺服系统提出非线性L2鲁棒控制。
DSP-based scheme of PM synchronous motor servo system and its experimental results are presented.
提出了一种基于DSP的永磁同步电机伺服系统方案；给出了样机实验结果。
A permanent magnet synchronous motor servo system based on torque Angle control is proposed in this paper.
在矩角控制的基础上，提出了永磁同步电动机的定位控制方案。
Fuzzy control strategy is introduced into a field-oriented controlled induction motor servo system in this paper.
将模糊控制技术引入到了感应电动机矢量控制+位置伺服系统中，设计了模糊位置和电流控制器。
This paper proposed a fuzzy sliding PD-type position controller for vector controlled induction motor servo drive.
针对矢量控制交流感应电机伺服系统，提出并设计一种模糊滑模pd型位置控制器。
The position tracking controller with good performance is the guarantee of high precision brushless DC motor servo system.
为了设计高精度的直流无刷电机伺服控制系统，性能优良的位置跟踪控制器是其重要保障。
The motor servo drive system was used to control antenna turning, adjust the antenna to point at satellite again and receive signal.
再用电机伺服驱动系统控制天线转动，调整其重新指向卫星接收信号。
Then, a DTC induction motor servo control simulation model is established, which adopts the self-learning fuzzy in velocity observer.
建立了伺服感应电动机DTC控制模型，其中速度观测器采用文中提出的自学习模糊速度观测器。
Growing background of EDM with linear motor servo system is explained. The features of linear motor servo system is analyzed. And some technology about them is discussed.
阐述了直线电机拖动的电火花成形机的产生背景，分析了直线电机伺服系统的特点，并讨论了与之相关的技术问题。
Aiming at characteristics of unpredictability the load torque used in ac motor servo system, a method of load torque adaptive identification based on state observer is presented.
针对交流电机伺服系统中负载转矩不可预测性的特点，提出一种基于状态观测器的负载转矩自适应辨识方法。
Abstract: Growing background of EDM with linear motor servo system is explained. The features of linear motor servo system is analyzed. And some technology about them is discussed.
文摘：阐述了直线电机拖动的电火花成形机的产生背景，分析了直线电机伺服系统的特点，并讨论了与之相关的技术问题。
The control system of WX-042 grinder consisted of 8031 single chip computer, stepping motor servo device and grating displacement tester, can automatically compensate the wear of the wheel.
本文介绍了WX—042磨床的单片机控制系统，它由8031单片机、步进电机伺服装置及光栅位移检测装置等组成。具有砂轮磨损自动补偿功能。
Considering the requirement of high performance of induction motor servo drive system, this paper designs such a system with a sliding-mode position controller based on double fuzzy neural network.
根据感应电动机伺服驱动系统高性能的要求，设计了一种基于双模糊神经网络的滑模控制的感应电动机伺服驱动系统。
Position detection of rotor in hybrid stepping motor servo system can use traditional outside position sensor or sensorless scheme based on theoretical algorism, but there are many problems produced.
混合式步进电动机伺服系统转子的位置检测，可以用传统的外配位置传感器或基于理论算法的无位置传感器方案，但是存在许多问题。
Servo motor has a long overload ability, have smaller rotary inertia and big plugging around moment.
伺服电机有较长的过载能力，有较小的转动惯量和大的堵转转矩。
Servo motor has small start frequency, can quickly from the lowest revolution accelerated to the rated speed.
伺服电机有很小的启动频率，能很快从最低转速加速到额定转速。
Servo motor control the car running, if there is no device in place is bound to cause the car abnormal operation, printing problems.
伺服电机操控着小车运转，假如没有装置到位必定致使小车运转反常，打印呈现疑问。
Ac servo system in many performance is better than the stepping motor.
交流伺服系统在许多性能方面都优于步进电机。
Servo motor is of high precision, speed and care with milliseconds, the disadvantage is that capital is relatively rare.
伺服电机利益是精度高，速度快，照料以毫秒计算，缺点是本钱相对名贵。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
Based on direct drive servo motor CNC bending machine technology is an emerging technology.
基于伺服电机直接驱动的折弯机数控技术则是一门新兴的技术。
From the lowest to the highest speed, speed servo motor can smooth running, torque ripple is small.
从最低转速到最高转速，伺服电机都能平滑运转，转矩波动小。
Now commonly used servo motor is ac servo motor, the axial end in motor with photoelectric encoder, by examining the rotor Angle to frequency conversion control.
目前常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
The exchange of motor and servo means that once one motor or servo doesn't work, it possible to be replaced by other less important motor or servo.
电机和伺服互换性，是指在实际生产中，某台电机或者伺服坏了之后，是否可以用相对不重要的电机或者伺服替换的容易程度。
Proficient in PLC programming (Siemens), human-machine interface touch screen, frequency converter, servo driver, stepper motor.
精通PLC编程（西门子、三菱），人机接口触摸屏、变频器、伺服驱动器、步进电机。
Three group of servo motor finish the function of precise counting, stacking and transfering out while high speed running.
由三组伺服电机共同构成高速运行下精确计数堆积输出功能。
Three group of servo motor finish the function of precise counting, stacking and transfering out while high speed running.
由三组伺服电机共同构成高速运行下精确计数堆积输出功能。
应用推荐