Use of the numerical analysis of the general principles calculation of electromagnetic field procedures.
利用普通的数值分析原理计算电磁场中的问题的程序。
The geometry models and numerical calculation models of temperature field in single-heat and multi-heat sources furnaces are established through finite element method.
采用有限元法建立了单热源合成炉和多热源合成炉温度场的有限元几何模型和数值计算模型。
This paper simulates the flow field of the slag swirl burner by the numerical calculation methods.
本文采用数值计算的方法对液排渣粉煤旋风燃烧器内的流场进行了模拟。
The influence of atomic motion, the field structure and intensity of photons on second-order correlation function and two-mode correlation function are obtained by numerical calculation.
通过数值计算分析了原子运动速度、场模结构参数和平均光子数对光场二阶相干度和模间相干度的影响。
The width and depth of laser transformation hardened layer was evaluated by establishing temperature field mathematical model and applying numerical calculation.
建立激光相变硬化过程的温度场数学模型，并应用数值计算预测了相变硬化带的形状和尺寸。
By means of numerical calculation, model test and field investigation the sedimentation of the underground culvert at the main irrigation canal in North -Jiangsu Province was analysed.
通过数值计算、模型试验和现场观测，对通榆河与苏北灌溉总渠立交地涵的泥沙淤积进行了综合分析。
Numerical calculation to the temperature field of structural member and hyperstatic structure was also carried.
对高温下建筑构件及超静定结构温度场进行了数值计算。
This paper presents a numerical calculation with finite difference method for two-dimensional turbulent jets mixing flow field.
本文给出了二维紊流射流掺混流场的有限差分数值计算方法。
So, numerical calculation technology of electromagnetic field and imploring a novel calculation method are great value subject.
因此，电磁场的数值计算技术，探索新的计算方法，是一个很有价值的课题。
The temperature field and thermal camber of the roll are made in numerical simulation by finite difference method and the calculation values coincide better with the measured values.
采用有限差分法对轧辊温度场和热凸度进行了数值模拟，计算值和实测值吻合较好。
The numerical treatments are made for the calculation of the potential flow field in a impeller with splitter blades.
文中对具有分流叶片的叶轮势流场计算作出了数值处理。
The results of numerical calculation show that the range of heat exchange coefficient to be taken between concrete and water is large, but its effect on thermal field is small.
数值计算结果表明，混凝土与水的热交换系数的取值范围较大，而对结构温度场的影响较小。
Numerical calculation model and method are applicable to analyzing reacting flow field of the solid rocket ramjet with central air-inlet mode.
采用的数值计算模型和方法适用于分析中心进气式固冲发动机反应流场。
The distribution of magnetic field is one of the important factors that affect magnetic abrasive finishing. The main method of this research is numerical calculation.
磁场分布是影响磁粒研磨加工的重要因素之一，研究磁场分布的主要方法是数值计算法。
To analyze the potential of floating conductor in ionized field, the ionized field numerical calculation is needed.
考察离子流场中悬浮导体的电位问题，需要进行离子流场数值计算。
The paper presents an introduction to a numerical calculation method of the steam flow field and heat transfer performance ot condensers, accompanied by the analysis of a calculated example.
介绍凝汽器汽相流场与传热特性的数值计算方法及算例分析。
In computing the dielectric recovery characteristic of HVCB during the interrupting course, the numerical results of parallel couple calculation on flow field and electric field has been performed.
本文在对开断过程中介质恢复特性进行的研究中，以两场并行计算得到的结果为依托进行了单元节点的数据耦合。
This paper deals with a field modulated magnetic gear and its calculation with the finite element method, and provides a powerful numerical technique for designing magnetic gears.
在电机设计时，使用有限元方法对一种大力矩磁力齿轮——磁场调制式磁力齿轮进行了磁场计算，为设计该磁力齿轮提供了有力的工具。
Instead of the time consuming numerical computation, a simplified calculation of the maximum field strength is presented for the purpose of dimensioning the three-phase gas insulated cable.
为确定三相充气管道电缆的尺寸，本文提出利用最大场强的简化计算方法来取代繁复的数值计算。
The finite difference method (FDM) is used in the numerical calculation. Fielddistribution at particular time and field at one point as a function of time are displayed.
数值计算采用了有限差分法，可算出某时刻厚板边缘散射场的分布和某点声场随时间的变化。
Electric field numerical calculation is the main foundation for the design of power capacitor.
电力电容器元件的电场数值计算是电容器设计的主要依据。
The thermal effect of high-energy laser produced within the beam controller and its influence on laser far-field spot are analyzed with numerical calculation method.
采用数值计算方法分析了高能激光在光束控制器内部传输所产生的热效应及其对激光远场光斑的影响。
Thus, the present study in the field, has become a mainstream method of numerical calculation, among which the finite element method is the method used most often.
因而，目前在该领域的研究中，数值计算成为了主流方法，其中又以有限单元法为使用得最多的方法。
Finite formulation method, also named after cell method, is a novel electromagnetic field numerical calculation method.
有限公式方法，又称元胞方法，是一种新型的电磁场数值计算方法。
The paper give a generalized theory equation with space charge effect. It does not restrict the range of Temperature and Field strength, It can use for metal FEA numerical calculation.
本文试图给出一个普适的统一的理论公式，它考虑了空间电荷限制效应和温度的影响，并且对场强也没有特别的限制，可用于金属FEA的数值计算。
We have studied fidelity of two-level atom interacting with nonlinear coherent state light field by numerical calculation method.
借助于数值计算的方法，研究了非线性相干态光场与一个二能级原子的相互作用系统保真度的变化规律。
A numerical calculation of magnetic charge model based on cylindrical permanent's magnet magnetic field was studied.
探讨了一种基于磁荷模型的圆柱型永磁体空间磁场的数值计算方法。
The deeping of the electric machine theory and many concepts, and the change of calculating method on electrical machines due to the numerical calculation of magnetic field are also analysed.
文中还分析了由电磁场数值计算引起的电机学理论和一些概念的深化，以及电机分析计算方法的变化。
Besides that, we presents the gravitational wave energy density under the weak field situation and gives the x - y plane numerical calculation to curvature scalar R and energy density .
还有计算了在弱场条件近似下引力驻波的能量密度，并给出曲率标量R和能量密度平面的数值计算。
Through the field experiment concerned, the necessary parameters for the numerical calculation of the pre-stressed anchorage are obtained.
通过预应力锚杆的现场试验，获取了数值计算所必需的参数。
应用推荐