A general solution is to add the spatial information to the object function of fuzzy C-means.
通常的做法是在原来模糊c -均值聚类的目标函数中加入空间信息惩罚项。
The inverse solution was obtained through minimizing the object function using CGM based on the direct problem.
反问题的解在正问题的基础上通过共轭梯度法最小化目标函数得到。
An optimum design model for offshore jacket platform is established by using the weight ass ingle object function.
建立以平台总重量为目标函数的导管架平台优化模型。
With the two degrees information of the object function in search direction, the algorithm improved the convergence.
由于搜索方向含有目标函数的二阶信息，提高了算法的收敛速度。
Direct method is used in the inverse analysis and the equation of object function is solved with composite algorithm.
反分析采用直接分析法并用复合形法求解目标函数方程。
The paper has adopted object function method and created optimization model of foundation ditch precipitation well cluster.
采用目标函数法，建立基坑降水井群优化模型。
In this paper, count flow cooling tower was optimally designed and its synthetically property was used as the object function.
本文以冷却塔综合性能最优为目标，结合逆流式泠却塔的热力计算特性，对逆流塔的热力性能进行优化设计。
Then, it used second order polynomial to fit the Central Line of text line, and constructed the object function of lens distortion.
然后利用二次多项式模型拟合文本行的中心线，并建立径向失真校正的目标函数。
A simple object function is proposed considering the gain bandwidth, on-off gain, gain flatness and other characteristic parameters.
提出新的目标函数，综合考虑增益带宽、开关增益、增益平坦度等特征参数。
This optimization object function was applied to the blood oxygen saturation measurement system and a higher signal-noise ratio was achieved.
将此目标函数应用到血氧饱和度无创测量系统中，提高了系统的信噪比。
The optimizing way that is used in the essay has some referenced meaning to some optimizing problem that can not find out the object function.
所用优化方法，对在不能对目标函数进行显化的情况下用计算机求解很具有代表性。
The theory of maximum mutual information is applied into speech recognition , maxi- mum mutual information estimation is used as object function .
将最大互信息理论用于语音识别，最大互信息估计作为目标函数。
To calculate the weight coefficients of the combination model firstly the Lagrangian multiplier method is applied to object function and equality constrains.
在组合模型的权重系数求解中，首先对目标函数和等式约束使用拉格朗日乘子法来求解权重系数。
The examples for both optical and SAR images are presented, in which the object function are based on the sparse prior in different data domain respectively.
并结合光学图像和SAR图像，在不同数据域的先验信息，分别构造各自的目标函数，实现图像分辨率增强。
The former firstly defines the design variable of the multiple spring and ensures the parameter of structure, then ensures the object function and state variable.
前者先定义复进簧的设计变量，确定其结构参数。再确定其目标函数、状态变量。
Taking minimizing annual operating cost as an object function, the method employed hereditary algorithm to get optimal compensatory places (non-node) and capacity.
该算法以年运行费用最小为目标函数，运用遗传算法求出最佳的补偿地点(非节点)和最优补偿容量。
The design of JQ160 type bridge erecting machine is theoretically verified. A series of feasible design alternatives with small value of object function is proposed.
从理论上验证了JQ 160型架桥机的设计，提出了一系列目标函数值较小的可行设计方案。
Taking optimization design of adjustor as an example, the process of constructing object function, defining initial value and simulating dynamic system was discussed.
并以调节器参数最优化设计为例，论述了目标函数构造、初值确定、动态系统仿真分析的过程。
In this control law multi-object function is created, which enables a voltage-source type inverter to produce a near standard sine wave with a minimum switching loss.
在这种新的逆变器开关控制策略中建立多目标优化函数，既使得电压型逆变电路输出电流波形总谐波畸变率尽量小，同时又能减小逆变过程的电力电子开关损耗。
It is shown in the experiment that this object function converges rapidly, and could improve both the learning speed and robustness of such speed servo control system.
通过实验研究，表明该方法收敛速度快，学习能力强，并提高了系统的鲁棒性，证实了其在电机速度控制中的有效性。
Based on lot of simulation experiments and theory analyses, research on selecting the optimization object function and the optimization strategy has been made in detail.
以大量的仿真实验及理论分析为基础，对寻优时目标函数的选取及寻优策略进行了详细的研究。
Because of super short-term load forecast error, ATC is changing with the adjustment of the generation scheduling by the object function that purchasing charge is least.
考虑到超短期负荷预测偏差的情况下，以购电费用变化量最小为目标函数重新调整发电计划，从而导致电网可用输电能力(atc)发生变化。
An optimum design is carried out with the hydraulic fluctuation factor as object function on the basis of a description of the evaluation parameters of lifting mechanism.
本文在介绍举升机构评价参数的基础上，以油压波动系数为目标函数，对自卸车的举升机构进行了优化设计。
Optimization for a proper engine mounting system taking the energy distribution target as an object function is an optimum topic that has many local optimization methods.
以能量解耦指标为目标函数对汽车动力总成悬置系统进行优化是一个有许多局部最优解的优化问题。
Third two adaptive methods of regularized factors are put forward based on the relations of data object function, model constraint object function, and regularized factor.
根据数据目标函数、模型约束目标函数和正则化因子之间的关系，提出了两种正则化因子自适应调节方法。
Through modifying the object function of the new algorithm, a proper tradeoff can be realized between LTF and ALTF for more satisfying performance parameters of LDPC codes.
该算法不仅可以进一步提高优化性能，还可以通过修改目标函数在下三角和准下三角之间合理均衡以便确定LDPC编码优化的最佳性能参数。
It is a linear programming problem with minimizing the total operational cost as its object function and taking the restraint of are and node capacities into consideration.
模型以路网总的运营费用最低作为目标函数，同时考虑了线路、车站的能力约束。
The object to be controlled can be evaluated in all respects when multi-object function comprehensive optimization for clutch is carried out during starting of motor vehicle.
对汽车起步过程中的离合器进行多目标函数综合优化，能够对控制目标进行全面评价。
The soft ware on optimum design of movable core arc welding transformer was introduced and the selection of the object function on optimum design was discussed in this paper.
介绍了梯形动铁式弧焊变压器优化设计软件，并对优化设计中的优化设计目标问题进行了探讨。
The soft ware on optimum design of movable core arc welding transformer was introduced and the selection of the object function on optimum design was discussed in this paper.
介绍了梯形动铁式弧焊变压器优化设计软件，并对优化设计中的优化设计目标问题进行了探讨。
应用推荐