More than 85% of the composite paper containers used for drinks (including milk) packing.
超过85%的复合纸容器用于饮料(包括牛奶)的包装。
The architecture of Composite Solution Platforms, as described in this paper, also offers a cleaner interface between SOA and BPM.
本文中描述的这个组合解决方案平台架构，同样提供了一个SOA和BPM间清晰的接口。
By introducing composite inversion ideas, the problem of ground motion inversion is studied in this paper.
本文运用复合反演的观点研究结构参数未知条件下的地震动反演问题。
This paper introduces the test results and calculative method by using the composite foundation of sand-stone pile and concrete pile with low strength.
本文通过试验与工程实践，介绍采用碎（砂）石桩及低强度混凝土桩组合构成复合地基的试验成果、计算方法及应用检测成果。
The sound radiation of viscoelastic composite sandwich plates is researched in this paper.
本文研究了夹层复合加筋板结构的振动声辐射特性。
This paper presents the design and production of submarine composite power cables with optical fibers as well as the mechanical tests-wrapping test, tensile test and bending test.
本文叙述了海底光纤复合电力电缆的设计、制造及进行的盘绕、拉伸、张力弯曲等机械性能试验。
This paper is related to the method of coating cotton fabric and apparels by used of the nano composite materials for the UV blocking function.
论述将纳米复合材料通过浸渍涂层的方法整理到棉织物及服装产品上，使其具有抗紫外线性能。
In this paper, a series of mechanical problems of structures for composite materials related to the design, manufacture and application are discussed.
本文探讨复合材料结构在设计、制造和应用过程中有关的一系列力学问题。
The similar subdomain BEM presented in this paper can also be successfully applied to the numerical simulation of the composite materials with different interphase layer.
本文提出的边界元相似子域法也可以推广应用于夹杂相外缘附有界面层结构的复合材料的数值模拟。
This paper introduces the conception of the composite library and the necessity of establishing the composite library, and expounds the features and developing trends of the composite library.
介绍了复合图书馆的概念和建立复合图书馆的必要性，阐述了复合图书馆的特点和发展趋势。
A new method aiming to incorporate the response surface method into the computation of system reliability for composite Bridges is proposed in this paper.
提出将响应面方法和非线性有限元分析结合起来对桥梁上部结构的体系可靠度进行分析的新方法。
The aim of this paper is to analyze composite soil nailing support with limited equilibrium method and to investigate the influence of retaining parameters on the stability of soil nailing structure.
本文研究目的在于采用极限平衡分析的方法对复合型土钉支护的稳定性进行理论分析，研究土钉支护参数对复合型土钉支护边坡稳定性的影响。
For conductive polymer composite, the conductive theory, development situation, important progress of technology, etc. are discussed in this paper.
本文讨论了复合型导电高分子材料的导电原理、开发现状和重要技术进展等。
The paper studies the relation between the section rigidity and the service time of the RC bridge under the composite effect of the expansion of cracks and the whole or local corrosion.
分别研究了钢筋混凝土桥梁在整体腐蚀和局部腐蚀同裂缝扩展的组合效应下截面刚度与服役时间关系。
Because the single fiber composite material is the special case of the hybrid fiber composite material, the calculation formulae in this paper can also apply to the single fiber composite material.
由于单一纤维复合材料是混杂纤维复合材料的特例，文中给出的计算公式同样适用于单一纤维复合材料。
In this paper we obtain several theorem of the definite integral of triangle composite function.
本文给出了计算三角复合函数的定积分的若干方法。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
This paper deals with the mechanical behaviors of steel-concrete composite beam and effective width of concrete slab on the axial force and the bending moment together function, based on the past job.
本文在总结前人工作的基础上，对结合梁斜拉桥中在轴力和弯矩共同作用下的钢—混凝土组合梁截面受力状态和混凝土桥面板有效宽度进行研究。
This paper will report the new achievements in our research on frequency tuning means of mix-structure co axial flow laser, especially on composite cavities of co laser suit for photochemistry.
本文报导了我们在混合型轴流一氧化碳激光器选频的研究成果，以及作者在适宜于光化学反应的轴流一氧化碳激光器主副腔方面的理论研究进展。
This paper mainly does the following researches with the object of ladle composite construction body.
本文以钢包复合结构体为研究对象，主要进行了以下的研究。
The development of inorganic polymer composite flocculants is summed up in the paper.
论文综述了无机高分子复合絮凝剂的研究进展。
The application of composite technique in the preparation of tools was reported in this paper.
本文报道了复合材料技术在工具制备中的应用。
One can improves performance of hydrophone and simplify working process for the advantage of batch process by pour forming and winding composite film process in this paper.
采用的灌注成型工艺和复合膜卷绕技术，可使水听器的性能得到改善，并简化了工艺，利于水听器的批量生产。
Based on the experiment on diamond composite surface, the paper describes the effect of pressure and temperature on diamond synthesis, proving that the theory of composite surface is correct.
根据金刚石合成曲面实验，描述压力和温度对金刚石合成效果的影响，证明了合成曲面理论的正确性。
The acoustic performance of SGRP composite and structure are investigated in this paper.
本文对透声复合材料及其构件的声学性能进行了研究。
This paper presented several methods for establishing the model of composite structure by numerical method.
本文简要介绍了复合材料结构的数值计算模型的建立方法。
This paper introduces the properties of needled composite mat as well as its application study in the pultrusion of composites products.
本文介绍了针织复合毡的特性及其在拉挤成型复合材料制品中的应用研究。
This paper introduces the properties of needled composite mat as well as its application study in the pultrusion of composites products.
本文介绍了针织复合毡的特性及其在拉挤成型复合材料制品中的应用研究。
应用推荐